Vendor: European Autospares Trading LLC
Genuine Bentley Active Engine Mount 3SA199384A
Dhs. 8,410.00
Vendor: European Autospares Trading LLC
Genuine Bentley Active Engine Mount 3SA199384A
Dhs. 8,410.00
Description
xShop Now Genuine Bentley Active Engine Mount Online – Part 3SA199384A
The Genuine Bentley Active Engine Mount 3SA199384A is designed to control engine vibration while keeping the engine securely positioned during different driving conditions.
This is a real OEM Bentley active engine mount featuring electronically controlled hydraulic damping. The mount adjusts its stiffness depending on engine speed and load. At idle, it softens to absorb low-frequency vibrations and keep the cabin quiet. During acceleration or higher speeds, it becomes firmer to stabilise the engine and maintain precise drivetrain alignment.
If the active mount fails, the system may lose its adaptive damping ability. This can result in increased vibration felt through the steering wheel, floor, or cabin. Over time, excessive engine movement may also place additional stress on surrounding components.
Replacing a worn mount restores the smooth driving refinement Bentley is known for.
Buy genuine Bentley engine mounts from EuropeanAutoSpares for reliable quality, exact compatibility, and trusted performance.
Specifications
-
Brand: Genuine Bentley OEM
-
Part Number: 3SA199384A
-
Type: Active Engine Mount
-
Material: OEM-grade hydraulic and rubber assembly with electronic control solenoid
-
Condition: Brand new, genuine OEM
Why Choose EuropeanAutoSpare?
Genuine OEM Quality
The hydraulic damping range and solenoid specification match your Bentley's engine management system exactly for correct variable damping at all operating points.
Perfect Fit
It mounts to the engine and subframe brackets with the correct bolt pattern and hydraulic line connections. A direct OEM replacement that the engine management system recognises immediately.
Clean Cabin Air
A correctly positioned engine keeps exhaust joints and ancillary seals under normal load. When the mount fails, and the engine moves excessively, those seals stress and can allow exhaust gases or oil vapour near the cabin fresh air intake.
Full Climate Efficiency
Active damping keeps the engine in the correct position under acceleration and at cruise. Correct positioning maintains drivetrain alignment and reduces parasitic loss from misaligned couplings.
Fast Delivery
EuropeanAutoSpare ships this genuine Bentley component with fast worldwide delivery.
Need Help Finding the Right Parts?
EuropeanAutoSpare uses your VIN to confirm the correct active engine mount position and specification for your Bentley. Different mounting positions use different part numbers.
Keep Your Bentley's Cabin Isolated and Refined
A genuine Bentley Active Engine Mount 3SA199384A maintains the variable vibration isolation that defines Bentley's cabin refinement. Replace a failing active mount and restore the driving experience your Bentley was built to deliver.
Fitment Details
xBentley Modern Front Control Arm Fitment Guide
| Bentley Model | Application / Engine Configuration Match | Chassis Year Range |
|---|---|---|
| Bentley Continental GT | 6.0L Twin-Turbo W12 / 4.0L Twin-Turbo V8 (3rd Gen Coupe) | 2018–2026 |
| Bentley Continental GTC | Convertible 6.0L W12 / 4.0L V8 Platforms (3rd Gen) | 2019–2026 |
| Bentley Flying Spur | 3rd Gen 6.0L W12 / 4.0L V8 Executive Saloon Lines | 2020–2026 |
Technician’s Advisory: The third-generation MSB-platform suspension utilizes torque-to-yield stretch fasteners that must be completely replaced during any control arm overhaul. When replacing lower or upper wishbones, never execute final torquing on the inner pivot bushings while the car is raised on a frame lift with the suspension unloaded. Securing the pivot bolts while the links dangle twists the rubber elements permanently outside their natural range of motion. Once lowered, the bushings remain under continuous pre-load, accelerating tearing and causing premature component failure. Execute final torque strictly at static curb ride height.
FAQs
xFrequently Asked Questions
Yes, this is a genuine Bentley OEM active engine mount (Part No. 3SA199384A). It is built precisely to factory material specs, ensuring structural load containment and accurate interface link communication with the vehicle's engine management module.
Unlike passive rubber isolators, an active engine mount utilizes internal fluid pathways controlled by an electronic actuator. By adjusting hydraulic damping rates in real time based on engine RPM and road vibrations, it actively cancels out powertrain harshness to preserve total cabin refinement.
Key symptoms of a degraded active mount include a noticeable increase in engine vibrations traveling through the cabin floor or steering column, a specific diagnostic fault light triggered by the electronic mounting loop, or visual, excessive torque movement of the engine block during hard acceleration.
In most cases, the engine control unit (ECU) recognizes the new internal actuator resistances automatically. However, certain model years require a diagnostic scan tool reset to re-learn the mount's operational boundaries. We recommend confirming the exact software calibration sequence for your vehicle with a qualified Bentley technician.
Yes, European Auto Spares provides fast and reliable express shipping straight to the UAE and worldwide. Every active mount assembly is packaged securely in heavy-duty structural packaging to protect the integrated fluid chambers and electrical pin connectors during global transit.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
