Vendor: European Autospares Trading LLC
Genuine Bentley Control Unit for Electro- Mechanical 3W0907801H
Dhs. 2,314.00
Vendor: European Autospares Trading LLC
Genuine Bentley Control Unit for Electro- Mechanical 3W0907801H
Dhs. 2,314.00
Description
xShop Now Genuine Bentley Control Unit Online – Part 3W0907801H
Bentley vehicles operate multiple sophisticated electronic systems simultaneously — active suspension, chassis control, power management, comfort functions, and safety systems all run as individual modules that communicate through your car's CAN bus network. Each module must carry the correct software version and CAN bus addressing to participate in that network without generating communication errors. The Genuine Bentley Control Unit 3W0907801H is the real OEM module that manages its specific system function in your Bentley's electronic architecture.
This is a genuine Bentley OEM control unit. The system function this specific part number manages depends on its installation position in your vehicle and is confirmed by the application data associated with your VIN. Bentley assigns unique part numbers to control modules managing different functions, and 3W0907801H applies to the electro system function at this position in your car's module network.
When a control module begins to fail, its symptoms appear across the systems it manages rather than at a single point. You may notice intermittent function loss in one system, warning lights that activate and clear without consistent pattern, or a persistent fault code that cannot be cleared because the module generating it is faulty rather than the system it monitors.
Replacing a Bentley control module requires more than plug-and-play installation. The new module must be coded to your vehicle's VIN through the Bentley diagnostic system. This process loads the vehicle-specific configuration data that tells the module which options your car has, which other modules are present on the network, and what operating parameters apply to your specific build specification.
An OEM module with the correct hardware revision accepts this coding correctly. An aftermarket module with different hardware may not accept the full coding routine, leaving some functions in a default or unconfigured state.
Specifications
-
Brand: Genuine Bentley OEM
-
Part Number: 3W0907801H
-
Type: Electronic Control Unit (Electro System Control Module)
-
Condition: Brand new, genuine OEM
Why Choose EuropeanAutoSpare?
Genuine OEM Quality
This is a real Bentley control unit. The hardware revision and CAN bus addressing match your Bentley's electronic architecture exactly for correct system integration and complete diagnostic coding acceptance.
Perfect Fit
Connects to the vehicle harness with the correct connector pinout. The Bentley diagnostic system recognises the module immediately during the coding procedure.
Clean Cabin Air
A correctly functioning electronic module manages its assigned system without generating spurious CAN bus errors. False error signals can affect unrelated systems including HVAC management, which impacts cabin air quality control.
Full Climate Efficiency
Correct module operation ensures the electro system it manages runs at designed efficiency. This prevents unnecessary energy consumption from a system operating in a fault or compensating state.
Fast Delivery
EuropeanAutoSpare ships this genuine Bentley module fast to the UAE and worldwide with system function and model confirmation before dispatch.
Need Help Finding the Right Parts?
EuropeanAutoSpare uses your VIN to confirm the exact system function and correct hardware revision for part number 3W0907801H in your specific Bentley build.
Restore Complete Electronic System Function to Your Bentley
A genuine Bentley Control Unit 3W0907801H brings the managed system back to designed operation within your car's electronic architecture. Always complete the full diagnostic coding sequence after installation.
Fitment Details
xBentley TRW Infrastructure EPB Actuator Fitment
| Bentley Model / Generation | Application Details (TRW Mechatronic Braking Infrastructure) | Year Range |
|---|---|---|
| Bentley Continental GT | 6.0L W12 & 4.0L V8 Models Rear Caliper Mounted Actuator Unit | 2004–2018 |
| Bentley Continental GTC | 6.0L W12 & 4.0L V8 Convertible Platforms Rear Caliper Mounted Actuator Unit | 2006–2018 |
| Bentley Continental Flying Spur | 6.0L Twin-Turbo W12 Luxury Saloon (Gen 1 Rear EPB Servo Hub) | 2005–2013 |
| Bentley Flying Spur | 6.0L W12 & 4.0L V8 Luxury Saloon (Gen 2 Rear EPB Servo Hub) | 2014–2019 |
Technician’s Advisory: This replacement actuator is designed explicitly to bolt onto **TRW-manufactured rear calipers and matches a specific multi-spline shaft configuration**. Prior to unbolting the old actuator or attempting to replace the rear brake pads, the Electronic Parking Brake (EPB) system must be driven into its installation/retract position using an approved diagnostic scan tool. Never attempt to manually pry or twist the motor spline without electronic control, as this will shatter the internal planetary gear assemblies. When installing the new unit, always replace the factory sealing O-ring, coat it lightly with clean silicone grease to prevent water intrusion, and perform a mandatory basic setting and calibration sequence to index the new motor's clamping travel limits.
FAQs
xFrequently Asked Questions
Yes, this is a genuine Bentley OEM electronic control unit (ECU) module (Part No. 3W0907801H). It is engineered strictly to Crewe's micro-electronic standards, ensuring optimal processing speeds, absolute network bus stability, and factory-certified data handling.
Yes, full software coding and adaptation are mandatory post-installation. The replacement control unit must be configured through an authorized Bentley diagnostic system to map the hardware directly to your chassis's specific build parameters, network topology, and regional specifications.
Pre-owned modules carry persistent encryption, Component Protection bottlenecks, and data maps linked to the donor chassis. While overwriting this baseline configuration can occasionally be forced, it frequently yields partial feature lockouts or active CAN bus network faults. A brand-new OEM control module guarantees a clean initialization sequence.
Because premium vehicle architectures deploy variations of this control unit across multiple localized subsystems depending on the chassis configuration, its dedicated system profile relies entirely on your VIN setup. To confirm exactly which powertrain or convenience function this runs on your model, submit your VIN to the European Auto Spares technical support team before your order ships.
Yes, European Auto Spares provides fast, fully-tracked express shipping straight to the UAE and worldwide. We seal each delicate electronic module inside specialized anti-static shielding bags and house them within thick, shock-insulated structural boxes to shield the integrated circuits, pins, and processor boards from transit forces.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
