Vendor: European Autospares Trading LLC
Genuine Bentley Electronic Parking Brake Actuator Service Kit 3W0698996E
Dhs. 2,366.00
Vendor: European Autospares Trading LLC
Genuine Bentley Electronic Parking Brake Actuator Service Kit 3W0698996E
Dhs. 2,366.00
Description
xShop Now Genuine Bentley Electronic Parking Brake Actuator Service Kit Online – Part 3W0698996E
Your Bentley's electronic parking brake system applies and releases the rear calipers through electric actuator motors integrated into each rear caliper body. Over time, the seals and mechanical elements within these actuators wear and require service to maintain correct operation. The Genuine Bentley Electronic Parking Brake Actuator Service Kit 3W0698996E provides all the genuine OEM components required to restore the actuator to factory specification.
This is a genuine Bentley OEM EPB actuator service kit. It contains the seals, O-rings, and relevant hardware components that wear within the electric parking brake actuator during normal service life. These components seal the actuator's mechanical drive elements against brake fluid and external contamination, and maintain the correct torque transmission path from the electric motor to the caliper piston.
A parking brake actuator that needs service shows specific symptoms. The parking brake applies unevenly across the two rear calipers, causing the car to pull slightly to one side during engagement or release. The actuator motor runs longer than expected to reach full application force because mechanical friction within a degraded actuator absorbs motor output before it reaches the piston. In some cases, the actuator fails to release fully, causing rear brake drag that you notice as increased fuel consumption and rear brake heat.
Using this OEM service kit guarantees that every seal and hardware component inside the actuator returns to the material specification Bentley selected for this application. Aftermarket seal kits use rubber compounds that may not be compatible with the brake fluid chemistry Bentley specifies. Incompatible seal compounds swell, shrink, or harden over time and recreate the failure condition the service was intended to resolve.
After actuator service, initialisation through the Bentley diagnostic system resets the actuator position calibration.
Specifications
-
Brand: Genuine Bentley OEM
-
Part Number: 3W0698996E
-
Type: Electronic Parking Brake Actuator Service Kit
-
Condition: Brand new, genuine OEM
Why Choose EuropeanAutoSpare?
Genuine OEM Quality
This is a real Bentley EPB service kit. All seal compounds are compatible with Bentley's specified brake fluid chemistry and rated for the pressure and temperature range inside the rear caliper actuator.
Perfect Fit
Every seal and O-ring in this kit matches the bore dimensions and groove specifications of the Bentley EPB actuator body exactly. No fitting compromise and no leakage after correct installation.
Clean Cabin Air
A correctly serviced rear actuator eliminates brake drag that generates excessive heat at the rear wheel. Reduced rear brake heat limits the thermal load on surrounding components and wheel arch areas near cabin air paths.
Full Climate Efficiency
A free-running rear actuator that releases completely eliminates the rolling resistance of rear brake drag. This improves fuel consumption and prevents premature rear disc and pad wear in everyday UAE driving.
Fast Delivery
EuropeanAutoSpare ships this genuine Bentley kit fast to the UAE and worldwide with actuator type and model confirmation before dispatch.
Need Help Finding the Right Parts?
EuropeanAutoSpare uses your VIN to confirm the correct EPB service kit for your Bentley's rear caliper and actuator specification.
Service Your Bentley's Rear Actuators With Factory-Grade Components
A genuine Bentley EPB Actuator Service Kit 3W0698996E restores correct seal integrity and mechanical function to your rear parking brake actuators. Always follow with diagnostic initialisation to recalibrate actuator position after service.
Fitment Details
xBentley Rear Iron System Brake Caliper Fitment
| Bentley Model / Generation | Application Details (Rear Axle — Left or Right Caliper) | Year Range |
|---|---|---|
| Bentley Continental GT | 6.0L W12 & 4.0L V8 (Standard Iron Brakes Only) Rear Hydraulic Setup | 2004–2018 |
| Bentley Continental GTC | 6.0L W12 & 4.0L V8 Convertibles (Standard Iron Brakes Only) Rear Hydraulic Setup | 2006–2018 |
| Bentley Continental Flying Spur | 6.0L Twin-Turbo W12 Luxury Saloon (Gen 1 Standard Iron Braking Profile) | 2005–2013 |
| Bentley Flying Spur | 6.0L W12 & 4.0L V8 Luxury Saloon (Gen 2 Standard Iron Braking Profile) | 2014–2019 |
Technician’s Advisory: This application profile is configured **strictly for factory standard cast-iron braking packages**. It will not fit, bolt to, or interface with models equipped with the optional Carbon Ceramic Brake (CCB) upgrade, which features entirely different mounting bracket spacing, radical caliper dimensions, and unique rotor thicknesses. Prior to retracting the caliper piston for pad replacement or unit service, the Electronic Parking Brake (EPB) must be driven into its factory "Service/Retract Mode" using an approved diagnostic scan tool. Attempting to manually compress the piston without electronic retraction will permanently shatter the internal mechanical plastic gear/worm-drive assembly inside the actuator housing.
FAQs
xFrequently Asked Questions
Yes, this is a genuine Bentley OEM Electronic Parking Brake (EPB) actuator service kit (Part No. 3W0698996E). It is manufactured exactly to Crewe's strict safety and engineering tolerances, ensuring absolute reliability and zero compromise within your luxury grand tourer's rear braking infrastructure.
Yes, precise software initialization is required post-service. The electronic brake caliper actuator position calibration must be safely reset and adapted through a factory-level diagnostic system to sync the newly serviced piston clearance parameters with the central parking brake control unit.
Common structural symptoms indicating a fault or fluid leak inside the actuator include uneven brake pad application across the rear axle, a longer than expected motor run time to achieve full clamp hold, continuous rear brake drag/overheating, or the illumination of active EPB warning indicators on the dashboard cluster.
No, absolutely not. Aftermarket reproduction seals frequently fail to comply with Bentley's highly specialized chemical brake fluid specifications. Non-OEM compounds can rapidly degrade, swell, or leak under intensive thermal pressure cycles, recreating the primary failure condition and risking severe caliper hydraulic cross-contamination.
Yes, European Auto Spares provides fast, fully-tracked express shipping straight to the UAE and worldwide. We pack every precision overhaul component within specialized anti-moisture wrappers and heavy-duty structural outer boxing to completely isolate the delicate vulcanized rubber seals, seals, and guide pins from transit damage.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
