Description
xShop Now Genuine Bentley Engine Mount RH Online – Part 3W0199381Q
The Genuine Bentley Engine Mount RH 3W0199381Q is the real OEM mount that carries out all three of these functions at the right side of your engine.
This is a genuine Bentley OEM right-hand engine mounting. Its part number distinguishes it from both the left engine mount and the other mounting positions within the same engine support system. The rubber compound stiffness, bracket geometry, and load axis orientation are all specifically engineered for the load characteristics at the right-hand mounting point of your Bentley's engine installation.
Bentley's engine support structure distributes load across multiple mounts, with each mount contributing a specific share of the static and dynamic load management. The right-hand mount's compound is chosen for the load magnitude and direction it experiences at this location, which differs from the values at the left and rear mounting positions. Substituting a mount with a different stiffness disrupts this load distribution and increases the burden on the remaining mounts, accelerating their wear.
Right-hand engine mount failure in a Bentley W12 typically presents as a low-frequency resonance at idle that is more pronounced on the passenger side of the cabin. Under hard acceleration, you may detect a subtle but uncharacteristic thump as the engine shifts against its remaining mounts when the right-hand mount can no longer resist the torque reaction load.
Oil contamination from a nearby rocker cover or oil separator leak accelerates rubber degradation significantly. Inspect for oil leaks whenever you replace an engine mount and address any source before fitting the replacement.
Specifications
-
Brand: Genuine Bentley OEM
-
Part Number: 3W0199381Q
-
Type: Right-Hand Engine Mounting (RH Engine Mount)
-
Function: Supports engine weight on the right side, absorbs right-bank torque reaction, and isolates right-side engine vibration from the cabin
-
Material: OEM-grade bonded rubber and steel bracket assembly with correct compound stiffness for RH position
-
Condition: Brand new, genuine OEM
Why Choose EuropeanAutoSpare?
Genuine OEM Quality
This is a real Bentley right-hand engine mount. Compound stiffness and bracket geometry match the load characteristics at the right mounting point of your Bentley's engine installation.
Perfect Fit
Bolts to the right engine bracket and subframe with the correct bolt pattern. Correct engine position on the right side restored from the first torque sequence without modification.
Clean Cabin Air
A secured engine on the right side keeps right-bank exhaust connections, coolant hoses, and ancillary seals under their designed load. Movement from a failed mount stresses these connections and can allow fumes near cabin air paths.
Full Climate Efficiency
Correct right-side engine positioning maintains the designed alignment between the engine, transmission, and propshaft. This minimises parasitic drivetrain losses and keeps the powertrain running at its designed mechanical efficiency.
Fast Delivery
EuropeanAutoSpare ships this genuine Bentley right-hand engine mount fast to the UAE and worldwide with mounting position and model confirmation before dispatch.
Need Help Finding the Right Parts?
EuropeanAutoSpare uses your VIN to confirm that 3W0199381Q is the correct right-hand engine mount specification for your Bentley model and production year. Right, left, and rear mounts use different part numbers and must not be interchanged.
Keep Your Bentley Engine Correctly Supported on the Right Side
A genuine Bentley Engine Mount RH 3W0199381Q restores correct engine positioning and vibration isolation at the right mounting point. Replace a failed right-hand mount before its load transfers to the remaining mounts and causes secondary wear across the engine support structure.
Fitment Details
xBentley RHS W12 Engine Hydro-Mount Fitment
| Bentley Model / Generation | Application Details (Large-Displacement Motor Mount) | Year Range |
|---|---|---|
| Bentley Continental GT | 6.0L Twin-Turbo W12 Platforms (Right-Hand Side Hydromount) | 2004–2011 |
| Bentley Continental GTC | 6.0L Twin-Turbo W12 Convertibles (Right-Hand Side Hydromount) | 2006–2011 |
| Bentley Continental Flying Spur | 6.0L Twin-Turbo W12 Luxury Saloons (Right-Hand Side Hydromount) | 2005–2013 |
Technician’s Advisory: This hydraulic motor mount is contoured and calibrated **strictly for the Right-Hand Side (RHS)** of the 6.0L W12 engine block assembly. It features unique internal fluid chamber volumes and dynamic dampening load rates that are entirely distinct from the left-hand side unit. Replacing these mounts is a highly intricate, labor-intensive procedure that typically requires unbolting the front subframe and partially dropping the steering rack to gain proper clearance. Always inspect or replace the auxiliary vacuum lines that connect to the electronic active dampening valves (if equipped on later sub-model updates), and always utilize brand-new factory stretch bolts torqued strictly to factory technical specifications to ensure the subframe grid remains secure.
FAQs
xFrequently Asked Questions
Yes, this is a genuine Bentley OEM right-hand engine mounting (Part No. 3W0199381Q). It is engineered strictly to original Crewe engineering parameters, utilizing premium elastomeric compounds designed to absorb massive structural powertrain harmonics and maintain factory-spec block alignment.
These individual part numbers apply to completely different Bentley model generations, engine configurations, and distinct structural mounting locations within the subframe assembly. They carry unique load axis ratings and dampening coefficients; never interchange them and always verify alignment with European Auto Spares using your VIN before completing checkout.
Typical indicators of an internal rubber breakdown or hydraulic fluid leak within the right-side mount include a noticeable increase in engine vibration filtering into the passenger side of the cabin at idle, an audible mechanical thump or clunk under sudden hard acceleration loops, or visible physical engine block movement from under the hood when the engine is revved in neutral.
Yes, absolutely. Left and right engine supports travel identical distances and endure synchronized torque loads. If the right-hand mount has suffered structural failure at your current mileage, the left-hand link has likely sustained significant stress deformation. Replacing them as a paired set restores perfectly balanced engine support and prevents premature fatigue on the new unit.
Yes, European Auto Spares provides fast, fully-tracked express shipping straight to the UAE and worldwide. We protect each high-mass structural isolator mount inside heavy-duty, impact-resistant outer boxing lined with specialized internal cushioning to shield the cast-metal housing, rubber bushings, and precision threads from transit shocks.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
