Description
xShop Now Genuine Bentley Engine Mounting Online – Part 4M0199255BT
The Genuine Bentley Engine Mounting 4M0199255BT holds your engine firm at this exact point.
Its rubber stiffness matches the level Bentley chose for this mounting position. Your Bentley engine makes strong torque each time you press the throttle. Without a proper mount, that torque lets the engine shift inside the bay. That movement strains the drivetrain, exhaust joints, and nearby parts at once.
This OEM engine mount fits a specific spot in the engine support system. Other mounts in the same car use different rubber strength and bracket shape. This design controls engine torque movement and limits vibration reaching the cabin.
Rubber inside the mount wears down over time from daily torque loads. You may hear a light knock during quick throttle blips when wear begins.
A weak mount also shifts parts connected to the engine. Early replacement restores engine support and helps prevent stress on nearby systems.
Specifications
-
Brand: Genuine Bentley OEM
-
Part Number: 4M0199255BT
-
Type: Engine Mounting
-
Material: OEM-grade bonded rubber and steel bracket assembly
-
Condition: Brand new, genuine OEM
Why Choose EuropeanAutoSpare?
Genuine OEM Quality
This is a real Bentley engine mount. The rubber compound and bracket geometry match the load and vibration requirements of this specific mounting position exactly.
Perfect Fit
It bolts to the engine bracket and subframe with the correct bolt pattern. Correct engine position restored from the first torque sequence without adjustment.
Clean Cabin Air
A secured engine keeps exhaust joints and ancillary seals under their designed load range. This prevents stress-induced leaks near cabin air intake paths.
Full Climate Efficiency
OEM rubber compound maintains stiffness in UAE underbonnet heat without permanent softening or bracket delamination over the engine's service life.
Fast Delivery
EuropeanAutoSpare ships this genuine part fast to the UAE and worldwide with mounting position and model confirmation before dispatch.
Need Help Finding the Right Parts?
EuropeanAutoSpare uses your VIN to confirm that 4M0199255BT is the correct mounting for your position. This part number differs from 4M0199256BT and occupies a different load point in your engine support structure.
Hold Your Bentley Engine in Place With the Correct OEM Mount
A genuine Bentley Engine Mounting 4M0199255BT keeps your engine correctly positioned and your cabin free from vibration intrusion. Replace a degraded mount before secondary wear spreads to adjacent drivetrain systems.
Fitment Details
xMLB Evo V8 LHS Turbo Oil Feed Line Fitment Guide
| Model / Generation | Application Details (4.0L Twin-Turbo V8 Engines Only) | Year Range |
|---|---|---|
| Bentley Bentayga | 4.0L V8 Twin-Turbo Gasoline Platforms (Left-Hand/Passenger Side Feed Matrix) | 2020–2026 |
| Lamborghini Urus | 4.0L V8 Twin-Turbo SUV Platforms (Left-Hand/Passenger Side Feed Matrix) | 2020–2026 |
Technician’s Advisory: This oil supply line is strictly contoured and engineered for the **Left-Hand Side (LHS)** turbocharger assembly of the hot-V engine layout. It features unique bend geometries, length dimensions, and heat-shielding sleeves that are completely distinct from the right-hand side line configuration. When installing a replacement feed line, always replace the copper crush washers on the banjo bolts, the specialized sealing O-rings, and the inline turbo oil screen filters. Ensure all mounting fasteners are torqued strictly to factory specifications, and execute a comprehensive engine oil priming sequence before restarting the engine to completely prevent dry-start friction scoring on the new turbine shaft bearings.
FAQs
xFrequently Asked Questions
Yes, this is a genuine Bentley OEM engine mounting (Part No. 4M0199255BT). It is engineered strictly to original Crewe engineering parameters, utilizing high-grade elastomeric core compounds designed to safely isolate structural powertrain harmonics and maintain perfect block alignment.
In the factory chassis layout, these part numbers correspond to completely unique mounting positions within the engine support subframe structure. Each position is engineered with distinct load axis orientations, physical weight capacities, and isolation dampening profiles. Always verify your exact installation configuration with European Auto Spares using your VIN before completing checkout.
Typical indicators of an internal rubber breakdown or structural fluid failure include a noticeable increase in engine vibration filtering into the passenger cabin at idle, an audible mechanical knock or thud when the throttle is blipped while in neutral, or excessive physical movement of the engine assembly under hard acceleration loops.
Yes, absolutely. Because a degraded mount collapses slightly and transfers its unresolved dynamic engine weight and torsional stresses to adjacent supports, related subframe mounts sharing similar mileage wear cycles will experience accelerated fatigue. It is highly recommended to thoroughly inspect all related mount assemblies during service and replace any displaying signs of surface micro-cracking or settling.
Yes, European Auto Spares provides fast, fully-tracked express shipping straight to the UAE and worldwide. We pack each heavy structural isolator mount inside reinforced, impact-resistant outer boxing lined with specialized internal cushioning to protect the mounting bushings, cast-metal arms, and precision threads from any transit shocks.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
