Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Bentley Oxygen Lambda Sensor Bank 2 Sensor 1 07C906262R – Continental GT
Dhs. 970.00
Vendor: European Autospares Trading LLC
Genuine Bentley Oxygen Lambda Sensor Bank 2 Sensor 1 07C906262R – Continental GT
Dhs. 970.00
Description
xGenuine Bentley Oxygen Lambda Sensor Bank 2 Sensor 1 07C906262R – Continental GT
The Genuine Bentley Oxygen Lambda Sensor 07C906262R is an original exhaust and engine-management sensor designed for compatible early Bentley Continental GT models. Installed in the exhaust system before the catalytic converter, it monitors exhaust oxygen levels and supplies information to the engine-management system for fuel-mixture control.
Bentley part number 07C906262R, formatted as 07C 906 262 R, is specifically documented on the early Continental GT as the Bank 2, Sensor 1 oxygen sensor. This means it is positioned on Bank 2 before the catalytic converter, rather than being a downstream post-catalyst sensor.
The strongest documented Bentley application is the 2004–2005 Continental GT W12 up to VIN 24945. Because Bentley uses multiple lambda sensors and the correct reference depends on sensor position, production date and VIN, customers should verify the exact location before ordering.
Product Specifications
- Brand: Bentley
- Product Type: Oxygen Sensor / Lambda Probe
- Part Number: 07C906262R
- Formatted Part Number: 07C 906 262 R
- Alternative Description: Lambda Sensor / O2 Sensor
- Position: Before Catalytic Converter / Pre-Catalyst
- Bank: Bank 2
- Sensor Position: Sensor 1
- Primary Application: Bentley Continental GT
- Engine: W12 – applicable configuration
- Strongest Documented Years: 2004–2005
- VIN Restriction: Up to VIN 24945 in documented Continental GT application
- System: Engine Management / Exhaust Emissions
- Condition: Brand New
- Quality: Genuine Bentley / OE
- Quantity: 1 Sensor
- Fitment: VIN and sensor-position dependent
Why Choose Genuine Bentley 07C906262R?
Genuine Bentley Engine Management Component
07C906262R is a genuine Bentley/VAG oxygen sensor reference used in the applicable factory exhaust and engine-management system. The lambda sensor provides exhaust oxygen information to the engine control system, allowing it to monitor and regulate combustion-related operating parameters.
Correct Pre-Catalyst Sensor
The most important identification for the early Bentley Continental GT application is Bank 2 – Sensor 1. This identifies the sensor as an upstream / pre-catalyst oxygen sensor positioned before the catalytic converter on the applicable Bank 2 exhaust path.
Bentley Continental GT Application
The strongest direct application is the Bentley Continental GT with the W12 engine. Specialist Bentley parts data identifies 07C906262R for Continental GT 2004–2005 with the production restriction up to VIN 24945. VIN verification is particularly important for vehicles around the production change.
Continental Flying Spur
07C906262R also appears in broader application data covering the Bentley Continental vehicle family, including Continental Flying Spur-related W12 applications. However, the strongest position-specific Bentley documentation for this exact reference is the early Continental GT. For a Flying Spur application, verify the VIN and original sensor reference before ordering.
Lambda Sensor Function
The oxygen/lambda sensor monitors oxygen content associated with the engine's exhaust gases. The engine-management system uses this information as part of its control strategy, supporting air/fuel mixture control, engine-management operation, fuel-trim regulation, emissions control and catalyst operating strategy.
Oxygen Sensor vs Lambda Sensor
The terms Oxygen Sensor, O2 Sensor, Lambda Sensor and Lambda Probe are commonly used for the same general type of exhaust sensor.
Oxygen Sensor vs MAF Sensor
The oxygen sensor should not be confused with the Mass Air Flow Sensor / MAF. A MAF sensor measures incoming engine air, while a lambda sensor monitors oxygen in the exhaust stream.
Sensor 1 vs Sensor 2
The sensor position is critical. Sensor 1 generally identifies the upstream sensor positioned before the catalytic converter. Sensor 2 generally identifies a downstream sensor positioned after the catalyst in the applicable exhaust arrangement. 07C906262R is documented as Sensor 1 for the early Continental GT Bank 2 application.
Bank 2 Position
Specialist Bentley data describes this application as Bank 2 (Left), Sensor 1. Installation should ultimately follow Bentley workshop documentation and VIN-specific parts information.
Supersession / Replacement Reference
07C906262R is an older VAG-family lambda sensor reference. Published parts data associates it with the later replacement/reference 1K0998262D. Because supersessions can depend on vehicle application, do not automatically change the EAT SKU if the physical Genuine Bentley stock is labelled 07C906262R.
Possible Symptoms of a Faulty Lambda Sensor
A malfunctioning oxygen sensor may potentially contribute to a check-engine warning, lambda sensor fault codes, fuel-trim faults, increased fuel consumption, irregular engine operation, reduced engine performance or emissions-related faults. These symptoms do not automatically confirm that the oxygen sensor itself is defective. Proper diagnosis should be carried out before replacement.
Diagnostic Testing
Before replacing 07C906262R, diagnosis may include reading stored fault codes, reviewing lambda sensor live data, checking fuel trims, inspecting sensor wiring and the electrical connector, checking for exhaust leaks and confirming Bank 2 Sensor 1 identification.
Wiring faults, exhaust leaks and other engine-management problems can cause sensor-related diagnostic codes even when the sensor itself is functional.
Installation
Oxygen sensor replacement should be performed by a qualified technician. Verify part number 07C906262R, vehicle VIN, Bank 2, Sensor 1 and pre-catalyst installation. Follow Bentley workshop procedures, route wiring away from hot or moving components, connect the electrical plug securely and verify sensor operation after installation.
Package Contents
Unless EAT's physical Genuine Bentley package confirms otherwise, advertise: 1 x Genuine Bentley Oxygen / Lambda Sensor 07C906262R.
Do not automatically advertise additional oxygen sensors, exhaust gasket, catalytic converter, wiring harness, mounting hardware or sensor removal tool as included.
Need Help Finding the Right Bentley Oxygen Sensor?
Bentley W12 vehicles use multiple lambda sensors, and selection can depend on VIN, model, model year, production date, engine specification, Bank 1 or Bank 2, Sensor 1 or Sensor 2 and pre-catalyst or post-catalyst position.
Provide the complete 17-digit VIN to European Auto Spares for accurate compatibility verification.
Fitment Details
xFitment Details
| Model | Application |
|---|---|
| Bentley Continental GT | W12 — 2004–2005 — Bank 2 Sensor 1 / Pre-Catalyst — 07C906262R |
| Bentley Continental GT | W12 — Up to VIN 24945 — Bank 2 Sensor 1 / Pre-Catalyst — 07C906262R |
| Bentley Continental Flying Spur | W12 — Selected Applications — Verify by VIN / Position — 07C906262R |
Important: Exact fitment depends on VIN, production specification and oxygen-sensor position. 07C906262R is position-specific; strongest documentation is Continental GT W12, 2004–2005, up to VIN 24945, Bank 2 Sensor 1, before the catalytic converter. Later documented replacement/cross-reference: 1K0998262D.
FAQs
xFrequently Asked Questions
07C906262R is a Genuine Bentley oxygen/lambda sensor used in compatible Bentley exhaust and engine-management systems.
The formatted reference is 07C 906 262 R.
Both descriptions are correct. It can be called an Oxygen Sensor, O2 Sensor, Lambda Sensor or Lambda Probe.
Yes. The strongest documented Bentley application is the early Continental GT W12.
Specialist Bentley parts data specifies 2004–2005 Continental GT.
Yes. The strongest documented application specifies up to VIN 24945.
For the documented Continental GT application: Bank 2.
It is Sensor 1.
It is installed before the catalytic converter. This is also called the Pre-Catalyst / Upstream Position.
Yes, for this documented Bentley application. 07C906262R is identified as Bank 2 Sensor 1 – Pre-Catalyst.
Yes. The strongest Bentley application is within the early Continental GT W12 engine-management system.
Broader cross-reference data associates this sensor family with Bentley Continental and Continental Flying Spur applications. Exact Flying Spur fitment should be confirmed by VIN before ordering.
Published parts data identifies 1K0998262D as a later replacement/cross-reference.
Not necessarily. Wiring faults, exhaust leaks and engine-management problems can produce lambda-sensor-related fault codes. Diagnosis is recommended first.
Unless otherwise stated: Quantity: 1 Sensor.
Yes. Provide the complete 17-digit VIN, Bentley model, model year, existing sensor number and bank/sensor position if known for exact compatibility verification.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
