Description
xGenuine Bentley Spring Band Hose Clamp N10716001 - OE Hose Clamp
The smallest parts cause the biggest headaches when they fail. The genuine Bentley spring band hose clamp N10716001 keeps hoses sealed with constant, self-adjusting tension — the factory's answer to leaks at hose joints on your Bentley in Dubai. Unlike generic worm-drive clamps that loosen as hoses age, this OE clamp maintains its grip through heat cycles, vibration, and time. For cooling and intake hoses, it is cheap insurance against the kind of leak that strands you.
What the N10716001 Spring Band Hose Clamp Does
The N10716001 is a spring band clamp that wraps the hose where it meets its fitting. Its spring steel band applies even pressure around the full circumference and — critically — maintains that tension as the hose expands when hot and contracts when cold. This self-adjusting behaviour is why manufacturers fit spring band clamps on critical cooling and intake hoses instead of screw-type clamps. The genuine Bentley N10716001 delivers the factory-specified clamping force for its size, so the seal holds without crushing the hose wall.
Signs Your Spring Band Hose Clamp Needs Replacing
Bad spring band hose clamp symptoms are worth catching early: coolant or fluid weeping at the hose joint, a hose that has started to slide on its fitting, or visible rust and loss of spring tension on the band itself. In the worst case, a weakened clamp lets the hose blow off under pressure — instant coolant loss and overheating. Whenever a hose is disturbed for other work, inspect its clamps; replacing the N10716001 at the first sign of seepage costs almost nothing compared to an overheating repair.
Why a Genuine Bentley Hose Clamp Matters
Clamps look interchangeable until they are not. Generic worm-drive clamps apply uneven pressure, cut into ageing hose walls, and loosen over time, while cheap spring copies lose their temper in sustained heat. The genuine Bentley spring band hose clamp N10716001 is made to Bentley's original specification for band tension and corrosion resistance, delivering constant clamping force around the full circumference through countless heat cycles. On a Bentley cooling system in the UAE, that consistency is the difference between a seal you forget about and a leak you chase.
Replacing the N10716001 Hose Clamp
Replacing a spring band hose clamp is straightforward for a technician with the right pliers: compress the band's ears, slide the old clamp off, position the new genuine N10716001 squarely over the hose end on the fitting barb, and release. The clamp centres itself — no torque setting to get wrong. Always match the clamp size to the hose; because clamp diameters vary across hoses and engine variants, confirm the exact size and application with your VIN before ordering.
Specifications
| Brand | Bentley |
| OE Part Number | N10716001 |
| Part Type | Spring Band Hose Clamp |
| Function | Constant-tension sealing of hose-to-fitting joints |
| Application | Cooling and intake hose joints |
| Material | OE-specification spring band |
| Condition | New, genuine Bentley part |
| Fitment | Bentley engine range — confirm size with VIN |
| Warranty | Genuine parts warranty; UAE consumer rights apply |
Genuine N10716001 vs Generic Clamps
| Feature | Genuine Bentley N10716001 | Generic / Aftermarket Clamp |
|---|---|---|
| Clamping force | Factory-specified constant tension, full circumference | Uneven pressure; loosens as the hose ages |
| Self-adjustment | Spring band compensates for heat expansion | Worm-drive types need retightening; often forgotten |
| Hose protection | Even pressure will not cut or crush the hose wall | Screw bands can dig into and damage ageing hoses |
| Heat resistance | Maintains temper through sustained engine-bay heat | Cheap spring copies lose tension in UAE heat |
| Corrosion resistance | OE-specification finish for long service life | Surface rust weakens the band prematurely |
| Warranty and support | Genuine parts warranty with UAE consumer rights | Limited or no warranty; no fitment support |
Verification note: part identity and fitment guidance verified against the live product listing at europeanautospares.com on 2026-10-09.
Why Choose European Auto Spares
Genuine Bentley Clamp, Correct Size Guaranteed
When you buy a spring band hose clamp in Dubai from us, you get the genuine Bentley N10716001 in the correct size. We confirm your VIN before dispatch so the clamp matches your exact hose and engine variant.
Transparent Pricing in AED
The spring band hose clamp price in the UAE is listed upfront in AED. It is one of the cheapest genuine Bentley parts we sell — and one of the smartest preventive purchases.
Replace Clamps With Every Hose Job
Technicians know: never refit a tired clamp on a new hose. We stock the genuine N10716001 so the right clamp is always on hand when the hose comes off.
Fast UAE Delivery
A weeping hose joint cannot wait. We dispatch genuine Bentley hardware quickly across the UAE to keep your repair on schedule.
Advice From People Who Know the Parts
Unsure which clamp size your hose needs? Send us your VIN and a description of the joint — we will match the correct genuine clamp before you order.
Need Help Confirming Fitment?
Spring band clamp diameters vary across hoses and Bentley engine variants, so the correct clamp depends on your exact application. Send us your complete VIN before ordering and our team will verify that the genuine N10716001 is the right size and type for your car. A two-minute check now prevents a return later.
Complete the Job — Related Bentley Parts
When renewing hose clamps, pair the job with the Genuine Bentley Engine Sealing Ring Gasket 057133287C wherever a sealing joint is opened at the same time. For body hardware repairs, see the Genuine Bentley Right Side Bonnet Hood Hinge Assembly 36A823302E and the Genuine Bentley Door Bowden Cable Lock Mechanism 3D0837017. Browse the full Engine Parts collection for the rest of your service.
Buy the genuine Bentley spring band hose clamp N10716001 online today from European Auto Spares — genuine parts, VIN-verified fitment, and fast UAE delivery.
Fitment Details
xBentley Spring Band Hose Clamp Fitment
| Bentley Model | Application |
|---|---|
| Bentley (engine range) | Cooling and intake hose joints — confirm exact clamp size with VIN |
Technician's Advisory: Spring band clamp diameters vary across hoses and Bentley engine variants. Always confirm the exact clamp size and application with your VIN before ordering — our team verifies compatibility before dispatch. Position the new genuine N10716001 squarely over the hose end on the fitting barb and release evenly; inspect neighbouring clamps whenever a hose is disturbed.
FAQs
xFrequently Asked Questions
The N10716001 is a genuine Bentley spring band hose clamp. Its spring steel band maintains constant tension around the hose, keeping a leak-free seal as the hose expands and contracts with temperature. Unlike worm-drive clamps, it self-adjusts — which is why manufacturers fit them on critical cooling and intake hoses.
A weak clamp shows as coolant or fluid weeping at the hose joint, a hose that slides on its fitting, or visible rust and loss of spring tension on the band. In the worst case the hose blows off under pressure. Replacing the N10716001 at the first sign of seepage is cheap insurance against overheating.
The N10716001 is a genuine Bentley spring band clamp, but clamp diameters vary across hoses and engine variants. Send us your full VIN before ordering and our team will confirm the exact size and application for your car. We verify fitment before dispatch so the correct clamp arrives the first time.
Generic worm-drive clamps apply uneven pressure and loosen as hoses age, while cheap spring copies lose tension in heat. The genuine N10716001 delivers the factory-specified constant clamping force around the full circumference, so the seal holds through heat cycles without crushing the hose.
This is a brand-new genuine Bentley part in factory packaging, covered against manufacturing defects under the standard genuine parts warranty. Your statutory consumer rights apply in the UAE: if the part arrives damaged or incorrect due to our error, we replace or refund it. Confirm the clamp size against your VIN before fitting.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
