Vendor: European Autospares Trading LLC
Genuine Ball Joint For Ferrari 458 Italia, 458 Spider, California T 157630
Dhs. 414.00
Vendor: European Autospares Trading LLC
Genuine Ball Joint For Ferrari 458 Italia, 458 Spider, California T 157630
Dhs. 414.00
Description
xGenuine Ferrari Ball Joint 157630
Restore precise suspension movement and maintain the controlled handling expected from your Ferrari with the Genuine Ferrari Ball Joint 157630. This Original Ferrari suspension component is used in selected Ferrari suspension and shock-absorber mounting applications, where it allows controlled articulation while helping the suspension assembly remain securely located under braking, cornering and changing road loads.
Part number 157630 appears in Ferrari parts catalogues across several model generations. Depending on the vehicle, the component may be described as a ball joint, suspension joint, shock-absorber bush or silent-block style mounting component. Its exact mounting position is not identical on every model, which makes VIN and parts-diagram verification important before ordering.
Why the Correct Suspension Joint Matters
A suspension joint works at a highly loaded connection point. As the suspension moves through compression and rebound, the joint must allow the intended movement without excessive free play. Wear, deterioration or damage at this point can contribute to knocking noises, unwanted movement, inconsistent steering or handling feel, and abnormal suspension behaviour. Similar symptoms can also be caused by other suspension components, so the vehicle should be inspected before replacement.
Benefits of Choosing the Original Ferrari Part
- Original Ferrari specification: supplied as Ferrari part number 157630.
- Correct application geometry: intended for the Ferrari suspension positions for which this reference is specified.
- Direct service replacement: suitable when the vehicle parts catalogue or existing component confirms 157630.
- Consistent repair quality: useful for maintaining an Original-parts suspension repair rather than mixing unidentified joint specifications.
- Broad Ferrari catalogue usage: this reference is found across multiple Ferrari model families, although the exact position and required quantity vary by chassis.
When Replacement May Be Required
Inspection is recommended if the suspension develops play, clunking or knocking over road irregularities, unusual movement at a damper or control-arm mounting point, inconsistent steering response, or visible deterioration around the joint or bush. Replacement should be based on physical inspection and the workshop procedure for the specific vehicle rather than symptoms alone.
Installation & Service Guidance
Professional installation is recommended because suspension joints are load-bearing components and access, pressing procedures, fastener tightening and final checks vary by model. The technician should confirm the correct suspension position from the Ferrari parts diagram, inspect the surrounding damper/control-arm hardware, and tighten all fasteners according to the applicable Ferrari workshop specification. Suspension geometry or wheel alignment should be checked when required by the repair procedure or if adjustable suspension points have been disturbed.
Important fitment note: Ferrari 157630 is used on selected applications only. Do not order by model name alone. Please provide your VIN so European Autospares can confirm the correct part number, suspension position and quantity before purchase.
Fitment Details
xFerrari 157630 Fitment Guide
| Ferrari Model | Approx. Model Years | Application Guidance |
|---|---|---|
| F355 | 1995–1999 | Selected suspension applications; verify exact position by VIN and parts diagram. |
| 360 Modena / Challenge Stradale | 1999–2004 | Selected suspension / shock-mount applications; exact position varies by version. |
| F430 / F430 Spider | 2005–2009 | Catalogued in suspension assemblies, including front-suspension applications on certain versions. |
| 612 Scaglietti | 2004–2010 | Selected suspension applications; confirm chassis and mounting position. |
| 458 Italia | 2010–2015 | Selected suspension / shock-absorber mounting applications. |
| 458 Spider | 2011–2015 | Selected suspension / shock-absorber mounting applications. |
| 458 Speciale | 2013–2015 | Catalogued suspension application; verify exact assembly by VIN. |
| California T | 2014–2017 | Selected suspension applications; verify model year and chassis. |
| F12berlinetta | Selected applications | Catalogued in rear-suspension assemblies on certain configurations; VIN confirmation required. |
Cross-reference: Ferrari parts catalogues may list part 157630 as a replacement for 159262. Confirm the supersession for the vehicle VIN before ordering.
Fitment advisory: The same part number can appear in different suspension positions across Ferrari models. Model name alone is not sufficient to confirm fitment. Please provide the VIN so the exact suspension location and quantity can be checked.
Installation advisory: Installation should follow the Ferrari workshop procedure for the specific chassis. Inspect the surrounding damper, control-arm and mounting hardware, use the specified fastener procedure, and check suspension geometry when required by the repair operation.
FAQs
xFrequently Asked Questions
Is Ferrari 157630 a Genuine Ferrari part?
Yes. This listing is for an Original / Genuine Ferrari suspension component supplied under manufacturer part number 157630.
What is Ferrari part number 157630?
It is a suspension joint used in selected Ferrari suspension and shock-absorber mounting applications. Depending on the parts catalogue and model, it may be described as a ball joint, suspension joint, shock-absorber bush or silent-block style mounting component.
Which Ferrari models use part 157630?
Catalogue references include selected applications in the Ferrari F355, 360, F430, 612 Scaglietti, 458 and California T families, with additional Ferrari applications appearing in model-specific parts catalogues. The exact suspension position differs by chassis, so VIN verification is required before ordering.
Does Ferrari 157630 replace part number 159262?
Several Ferrari parts catalogues cross-reference 157630 as the replacement for 159262. Because supersessions can depend on chassis and assembly position, confirm the relationship against the VIN and current parts catalogue before purchase.
Is 157630 used at the front or rear suspension?
It depends on the Ferrari model and suspension assembly. Parts catalogues show this reference in different suspension positions on different vehicles. Please use the VIN and model-specific diagram to confirm the exact location.
What are possible signs of a worn suspension joint?
Excessive play, knocking over bumps, unwanted movement at the suspension mounting point, inconsistent handling feel or abnormal suspension behaviour can indicate wear. These symptoms can have other causes, so inspection is recommended before replacement.
How many Ferrari 157630 joints do I need?
The required quantity depends on the vehicle and the suspension position being repaired. Do not assume that the part must always be replaced as a pair; check the Ferrari parts diagram and inspect the opposite side before ordering.
Is wheel alignment always required after replacement?
Not automatically in every case. Alignment or suspension geometry should be checked when required by the Ferrari repair procedure, when adjustable suspension points have been disturbed, or when the vehicle shows alignment-related symptoms after the repair.
Is professional installation recommended?
Yes. Suspension joints operate at load-bearing mounting points, and installation procedures vary by chassis. Correct tools, mounting orientation and Ferrari-specified fastener procedures should be followed.
How can I confirm fitment before ordering?
Send European Autospares your Ferrari VIN. We can check the part number, suspension location and required quantity against the vehicle application before purchase.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
