Description
xShop Now Genuine Ferrari Engine Mounting Online – Part 269817
The Genuine Ferrari Engine Mounting 269817 is engineered to provide stable engine support while reducing vibration and movement during driving. In high-performance vehicles like Ferrari, engine balance and mounting precision are extremely important. This OEM Ferrari engine support helps maintain correct engine alignment within the chassis and ensures smooth power delivery without unnecessary vibration transfer to the cabin.
Engine mounts play a critical role in overall drivetrain stability. Over time, worn or weakened mounts can cause excessive vibration, unusual engine movement, or noise during acceleration. Replacing a tired mount with a genuine Ferrari component restores factory-level comfort and performance. This high-performance engine mounting is produced according to Ferrari’s original factory specifications, ensuring accurate fitment without modification.
Material strength and internal damping properties are carefully designed to handle engine torque, thermal expansion, and road stress. Whether the vehicle is used for daily driving or spirited performance runs, this Ferrari vibration control mount supports consistent engine positioning under load.
It is commonly replaced during engine service, drivetrain inspection, or when signs of vibration increase become noticeable. Using OEM Ferrari engine support components helps prevent secondary wear on surrounding parts such as brackets, exhaust connections, and transmission components.
Europeanautospares supplies genuine Ferrari spare parts that meet original engineering standards. Each engine mounting is new, properly packed, and ready for direct replacement installation. Customers can order this product not only within the UAE but also online from anywhere in the world with secure international shipping options.
Specifications
- Brand: Ferrari
- Part Number: 269817
- Product Type: Engine mounting
- Material: OEM-specification rubber and metal assembly
- Condition: New
- Fitment Type: Direct replacement
- Application: Engine support and vibration control
-
Manufacturing Standard: Ferrari factory specification
Why Choose European Auto Spares
Factory-Approved Ferrari Quality
All parts supplied follow original Ferrari production standards to ensure proper engine balance and long service life. Europeanautospares focuses on delivering genuine Ferrari components that match factory performance.
Accurate Match for Application
The mounting dimensions, bolt points, and damping structure are designed specifically for Ferrari chassis systems, ensuring correct alignment and secure installation.
Reliable Under Performance Conditions
This Ferrari engine mount is developed to withstand high torque output, heat cycles, and road stress typical of performance vehicles.
VIN Compatibility Support
Our team can verify part compatibility using your VIN to ensure the correct Ferrari engine support is selected for your vehicle.
Worldwide Fulfilment
We are based in Dubai and ship globally. You can purchase this product not only in the UAE but also online from anywhere in the world with reliable delivery services. Europeanautospares ensures careful packaging and secure international shipping.
Need Help Finding the Right Ferrari Part?
We are based in Dubai and serve customers worldwide. Connect with our auto specialists for expert support with part verification, compatibility, pricing, and warranty details. Our team can source the correct Ferrari spare parts and deliver them directly to your doorstep, locally or anywhere across the globe.
Maintain Reliable Engine Stability
Ferrari Engine Mounting 269817 may appear to be a small component, but it plays a major role in maintaining engine positioning and reducing vibration. A properly functioning mount supports smooth acceleration, protects drivetrain components, and enhances driving comfort.
Replacing worn engine mounts at the right time helps maintain original performance standards and prevents excessive stress on connected systems. Genuine Ferrari components are designed to work in harmony with the vehicle’s engineering, ensuring dependable operation over long service intervals.
Europeanautospares helps Ferrari owners maintain factory-level driving refinement by supplying trusted OEM-quality spare parts worldwide.
Fitment Details
xFerrari Front-Mid V12 Oil Pump Drive Gearset Fitment
| Model / Generation | Application Details (Front-Mid Longitudinal Engines Only) | Year Range |
|---|---|---|
| Ferrari F12berlinetta | 6.3L Naturally Aspirated V12 Performance Flagships Secondary Drive Link | 2013–2017 |
| Ferrari F12tdf | 6.3L V12 Lightweight Track-Focused Limited Edition Secondary Drive Link | 2015–2017 |
| Ferrari 812 Superfast | 6.5L Naturally Aspirated V12 Core Generation Secondary Drive Link | 2018–2024 |
| Ferrari 812 GTS | 6.5L V12 Open-Top Spider Configurations Secondary Drive Link | 2020–2024 |
| Ferrari 812 Competizione | 6.5L High-Output Limited Series (Coupe & Aperta Spec) Secondary Drive Link | 2021–2024 |
| Ferrari GTC4Lusso | 6.3L V12 All-Wheel-Drive Grand Tourer Specs Secondary Drive Link | 2016–2020 |
Technician’s Advisory: This oil pump secondary drive gearset is precision-matched and configured **strictly for the front accessory drive housing of front-mid longitudinal F140 V8/V12 block architectures**. It will not interface with rear-mid-mounted platforms like the 458 or 488 series due to entirely different timing cover spacing profiles. Replacing this gearset requires pulling the complete engine unit out of the front chassis and dismantling the front multi-layer timing chain cover infrastructure. When meshing the new gearset onto the internal pump shafts, verify the rotational gear backlash using a dial indicator gauge to ensure perfect clearance baselines. Always replace all surrounding multi-layer steel gaskets, utilize fresh high-tensile retaining fasteners torqued strictly to factory specs, and execute a comprehensive engine oil flushing sequence post-installation to eliminate any residual metal debris.
FAQs
xFrequently Asked Questions
This structural isolation component securely carries and anchors the high-performance engine block to the vehicle chassis matrix. Engineered with specialized load-bearing damping properties, it absorbs aggressive torsional engine forces while eliminating unwanted powertrain vibrations to maintain balanced tracking and maximum cabin refinement.
Yes, this is an authentic, genuine Ferrari OEM engine mounting assembly (Part No. 269817). It is manufactured in strict alignment with Maranello’s original factory engineering blueprints, guaranteeing the precise rubber compound density and hardware tensile strength intended for your vehicle.
Common performance indicators of internal rubber tearing or compound breakdown include increased low-frequency cabin vibrations felt at idle, metallic knocking or thumping sounds under rapid acceleration shifts, and unmetered visual engine movement within the engine bay during high-torque loading loops.
Complete assembly replacement is recommended immediately during major drivetrain drop overhauls if surface degradation is detected, or the moment powertrain shift stability compromises driver feedback or introduces persistent chassis harshness.
Yes, you can purchase the Genuine Ferrari Engine Mounting 269817 online through European Auto Spares from any country worldwide. We provide fast, fully-tracked express international shipping, packing the heavy component within robust, shock-insulated multi-layer boxes to protect the factory bushings during transit.
Because structural mounting angles, load-bearing capacities, and chassis alignment tolerances alter precisely across Ferrari mid-engine and front-engine variants (such as the 458, 488, F12, or California platforms) and model layout years, please share your 17-digit VIN with our support specialists before checkout to ensure an absolute fitment match.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
