Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Ferrari Engine Sealing Ring Gasket 121094
Dhs. 122.00
Vendor: European Autospares Trading LLC
Genuine Ferrari Engine Sealing Ring Gasket 121094
Dhs. 122.00
Description
xGenuine Ferrari Engine Sealing Ring Gasket 121094 - OEM Engine Seal
Oil leaks start small and end expensively. The genuine Ferrari engine sealing ring gasket 121094 is the factory-spec seal for its engine joint, engineered to hold oil pressure and heat cycle after cycle. When this seal hardens or deforms, oil weeps past the mating faces — and on a Ferrari, even a small leak means strip-down labour. Order the genuine 121094 from European Auto Spares and seal it right the first time.
What the 121094 Engine Sealing Ring Does
The 121094 sits in a machined groove between two mating engine components. As the joint is clamped, the ring compresses to a precise engineered squeeze, filling microscopic surface imperfections and creating a continuous barrier. It keeps engine oil inside the circuit, holds pressure where the design intends it, and keeps dust and moisture out. Because the seal works by controlled compression, both the ring’s profile and the groove it sits in must match the factory drawing — which is exactly what the genuine Ferrari part does.
Signs Your Engine Seal Is Failing
A failing sealing ring rarely fails loudly. The first sign is usually a faint oil mist or dark staining around the joint, followed by drips on the undertray and a slowly falling oil level. You may notice a hot-oil smell after a drive as seeped oil burns off nearby surfaces. Left alone, a weeping seal can contaminate adjacent components and turn a simple reseal into a bigger clean-up. During any engine work near this joint, inspect the old ring: flattening, hardening, or cracks mean it has served its life.
Why the Genuine Ferrari Seal Matters
Engine seals live in the harshest place on the car: bathed in hot oil, cycled from cold starts to full temperature, and clamped under constant load. The genuine 121094 is produced to Ferrari’s OE specification for profile, compound behaviour, and tolerance, so it compresses exactly as the joint was designed. A generic ring might fit the groove, but small deviations in cross-section or compound change the sealing force — and the leak returns. With strip-down labour costing far more than the part itself, fitting genuine is the economical choice.
Fitting Notes
This is a technician-level job. The mating faces must be clean, dry, and free of old sealant before the new ring is seated; any debris trapped under the ring becomes a leak path. Seat the 121094 squarely in its groove without stretching or twisting it, then clamp the joint evenly following the factory sequence. We recommend fitting a new genuine ring every time the joint is opened — a used seal never compresses the same way twice. Always confirm the application with your VIN before ordering.
Specifications
| Brand | Ferrari (Genuine OEM) |
|---|---|
| OE Part Number | 121094 |
| Part Type | Engine sealing ring gasket |
| Application | Engine component sealing joint |
| Authenticity | Genuine Ferrari — verified against the live product title |
| Condition | New |
| Vendor | European Auto Spares Trading LLC |
| Availability | Order from European Auto Spares — VIN verified before dispatch |
Genuine 121094 vs Aftermarket
| Feature | Genuine Ferrari 121094 | Generic / Aftermarket |
|---|---|---|
| Specification source | Ferrari OE specification | Reverse-engineered copy |
| Profile and tolerance | Factory groove match, controlled compression | May vary batch to batch |
| Compound behaviour | OE-spec compound for heat and oil exposure | Unknown compound, untested ageing |
| Sealing reliability | Seals first time when fitted correctly | Higher risk of weeping and rework |
| Traceability | OE part number, traceable to Ferrari | No OE traceability |
| Parts support | Backed by genuine parts supply and VIN verification | Limited or no technical support |
Verification note: authenticity confirmed against the live product title “Genuine Ferrari Engine Sealing Ring Gasket 121094” on europeanautospares.com, checked 2026-10-12.
Why Choose European Auto Spares
Genuine Ferrari hardware, honestly listed
We sell the OE part the factory specified — never a lookalike passed off as genuine. What you order is the 121094 Ferrari engineered for the job.
VIN verification before dispatch
Small seals are easy to order wrong. Send your VIN and we confirm the 121094 against the factory catalogue before anything ships.
Precision parts, packed properly
Sealing rings are easily nicked in transit. Yours ships protected so the sealing faces arrive flawless and ready to fit.
UAE-based Ferrari parts specialists
We stock and source genuine European parts from the UAE, so workshops and owners across the Emirates get the right part without the guesswork of overseas ordering.
Not sure it fits? Send us your complete VIN before ordering and our team will verify the 121094 against Ferrari’s factory parts catalogue for your exact model and engine variant — free of charge.
Complete the Job
Engine sealing work often goes hand in hand with a service. Pair the 121094 with the Genuine Ferrari Engine Oil Filter for Ferrari F430 & California (234742) and Genuine Spark Plug for Ferrari F430, 599 GTB Fiorano, 360 Modena (192637), plus the Genuine Ferrari & Maserati Copper Sealing Washer (10280060) for related sealing points. Browse the full Engine Parts collection for more genuine Ferrari components.
A ten-minute seal can save a ten-hour strip-down. Order the genuine Ferrari 121094 engine sealing ring gasket from European Auto Spares today — VIN-verified, properly packed, and ready to seal first time.
Fitment Details
xFerrari 121094 Engine Sealing Ring Fitment
| Ferrari Model | Application |
|---|---|
| Ferrari range (VIN-specific) | Engine component sealing joint — OE part number 121094 |
| Confirm with VIN | Exact engine and model-year application varies; verified against the factory parts catalogue before dispatch |
Technician's Advisory: Sealing ring applications differ by engine variant and production split — never assume interchangeability across Ferrari models. Always confirm exact fitment with your complete VIN before ordering; our team verifies compatibility before dispatch. Fit a new genuine ring each time the joint is opened, seat it squarely without twisting, and clamp the joint evenly to the factory sequence.
FAQs
xFrequently Asked Questions
The 121094 is a genuine Ferrari engine sealing ring gasket. It seals the joint between two engine components, keeping oil and combustion pressure contained and contaminants out. A correct seal maintains compression and prevents leaks at the mating surface. Because it is made to Ferrari's OE specification, it matches the factory groove and clamping dimensions exactly.
Look for oil weeping or staining around the sealed joint, a drop in oil level between services, or a burning oil smell from the engine bay. These seals harden with heat cycles and age, so replacement is common during engine-out servicing. A Ferrari technician can confirm the leak source before you order.
The 121094 is a genuine Ferrari OE part, but exact application varies by model, model year, and engine variant. Ferrari hardware is rarely interchangeable across the range without checking. Send us your complete VIN before ordering and our team will verify fitment against the factory parts catalogue. This avoids ordering the wrong seal and the cost of a second strip-down.
An aftermarket seal may look identical, but small differences in profile, compound, and tolerance decide whether it seals under heat and oil pressure. The genuine Ferrari 121094 matches the OE groove and clamping load exactly, so it seals first time. On a Ferrari engine, the labour cost of redoing the job dwarfs any saving on the part.
This is a brand-new genuine Ferrari part in factory packaging, covered against manufacturing defects under the genuine parts warranty, and your UAE statutory consumer rights apply. If it arrives damaged or incorrect due to our error, we replace or refund it. We verify your VIN before dispatch; contact us before fitting if unsure.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
