Vendor: European Autospares Trading LLC
Genuine Ferrari Front Shock Absorber Spacer for 458 Italia & 488 Spider 188996
Dhs. 70.00
Vendor: European Autospares Trading LLC
Genuine Ferrari Front Shock Absorber Spacer for 458 Italia & 488 Spider 188996
Dhs. 70.00
Description
xShop Now Genuine Ferrari Front Shock Absorber Spacer Online – Part 188996
This is the genuine Ferrari Front Shock Absorber Spacer 188996. It is a precision-machined component that sits within the front suspension assembly of the 458 Italia and 488 Spider. It sets a specific dimensional reference inside the shock absorber mounting one that determines the front ride height and the geometric relationships of the entire front suspension.
Suspension geometry in a mid-engined Ferrari is not a general approximation. Every dimension in the front suspension is calculated to deliver a specific balance between grip, steering response, and high-speed stability. The shock absorber spacer contributes to that by setting the exact position of the shock absorber relative to the hub carrier and the body mounting point.
A missing or incorrect spacer changes the effective spring perch position. Front ride height shifts by the spacer's thickness dimension. As ride height changes, so do camber angle, caster trail, and scrub radius the suspension geometry parameters that determine how the car steers, turns in, and recovers from mid-corner disturbances.
This genuine Ferrari OEM front strut spacer is machined to the exact dimensional specification Ferrari's engineers calculated for these models. It is not a generic washer or shim — it is a tolerance-critical component made from the correct material to resist compression under the sustained load of the front suspension spring.
EuropeanAutoSpare carries this genuine part and ships it fast to the UAE and worldwide.
Specifications
-
Brand: Genuine Ferrari OEM
-
Part Number: 188996
-
Spacer Thickness: 8.5 mm
-
Outer Diameter: 58 mm
-
Inner Diameter: 36 mm
-
Condition: Brand new, genuine OEM
Why Choose EuropeanAutoSpare?
Genuine OEM Quality
A real Ferrari spacer machined to 8.5 mm thickness from hard-anodised aluminium alloy. Built to factory standards for precision and durability.
Perfect Fit
58 mm outer diameter and 36 mm inner diameter match the front shock assembly bore and shaft dimensions exactly. Installs cleanly with no modification required.
Correct Geometry
Restores front ride height and suspension angles to factory specification after shock service. Ensures proper alignment and handling characteristics.
Strong and Long-Lasting
Hard-anodised aluminium resists compression set and corrosion under continuous suspension load. Designed for long-term structural integrity.
Fast Delivery
Quick and reliable shipping available across the UAE and worldwide. Backed by expert support for a smooth and hassle-free experience.
Always Fit This Spacer as a Matched Pair
EuropeanAutoSpare recommends ordering two spacers, one for each front corner, whenever front shock absorber work is carried out on the 458 or 488. Fitting a spacer on one side and not the other introduces a side-to-side height difference that cannot be corrected by alignment adjustment alone.
Restore Your Ferrari's Front Geometry to Factory Specification
A real Ferrari Front Shock Absorber Spacer 188996 ensures the front suspension of your 458 Italia or 488 Spider returns to exactly the dimensional specification Ferrari intended. At 8.5 mm thickness with a 12 kN load rating, it holds its dimension under the full weight of the front suspension spring, permanently.
Fitment Details
xFerrari 360 & F430 Front Suspension Fitment
| Ferrari Model | Application | Year Range |
|---|---|---|
| Ferrari 360 Modena | Front Suspension – All Trims | 1999–2005 |
| Ferrari 360 Spider | Front Suspension – All Trims | 2000–2005 |
| Ferrari 360 Challenge Stradale | Front Suspension – Special Edition | 2003–2004 |
| Ferrari F430 | Front Suspension – Base & Spider | 2005–2009 |
Technician’s Advisory: On the 360/F430 platform, the Ball Joints are a known high-wear item; if you experience "creaking" during low-speed maneuvers or vague steering on-center, the joints likely require replacement. While the F430 shares architecture with the 360, it utilizes updated bushings and damping rates. Always perform a precision four-wheel alignment after suspension work to ensure the rake and toe-in parameters match Ferrari’s specific high-performance handling standards.
FAQs
xFrequently Asked Questions
Yes, this is a genuine Ferrari OEM front shock absorber spacer (Part No. 188996). It is precision-manufactured to meet Ferrari's strict structural requirements, ensuring the front suspension geometry remains factory-perfect.
This spacer is machined from hard-anodised aluminium alloy. It features a thickness of 8.5 mm, an outer diameter of 58 mm, and an inner diameter of 36 mm. It is rated for a 12 kN static load to withstand high-performance driving stresses.
This spacer is required whenever the front shock absorber assembly is disassembled for maintenance or replacement on the 458 or 488 platforms. It is critical to ensure the spacer is reinstalled in its factory-correct position to maintain proper ride height and suspension travel.
This component is a direct fit for the Ferrari 458 Italia, 458 Spider, 488 GTB, and 488 Spider. To ensure this is the correct spacer for your specific chassis or suspension setup (standard vs. lift system), please send your VIN to European Auto Spares for confirmation.
Yes, fast delivery is available across the UAE and worldwide. European Auto Spares provides professional support and specialized packaging to ensure your genuine Ferrari suspension components arrive in perfect condition.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
