Vendor: European Autospares Trading LLC
Genuine Ferrari Front Shock Absorber Vehicle Lift System 317752
Dhs. 7,541.00
Vendor: European Autospares Trading LLC
Genuine Ferrari Front Shock Absorber Vehicle Lift System 317752
Dhs. 7,541.00
Description
xShop Now Genuine Ferrari Front Shock Absorber Vehicle Lift System Online – Part 317752
The Genuine Ferrari Front Shock Absorber Vehicle Lift System 317752 combines suspension damping with an integrated hydraulic lift mechanism to raise the front of the car when needed.
This is a real OEM Ferrari front damper designed for models equipped with the factory nose lift system. Inside the unit, a dedicated hydraulic chamber allows the suspension to extend when the lift system is activated. At the press of a button, the front of the vehicle rises by a controlled amount to help clear speed bumps, steep driveways, or ramps. Once the vehicle reaches a set speed, the system automatically returns the suspension to normal ride height.
If the lift chamber or internal seals wear out, the system may struggle to maintain pressure or fail to lift properly, while damping performance may also decline.
Buy genuine Ferrari suspension components from EuropeanAutoSpares for trusted quality, exact compatibility, and reliable performance.
Specifications
-
Brand: Genuine Ferrari OEM
-
Part Number: 317752
-
Type: Front Shock Absorber with Vehicle Lift System
-
Condition: Brand new, genuine OEM
Why Choose EuropeanAutoSpare?
Genuine OEM Quality
This is a real Ferrari nose lift front shock absorber. Both the damping valve calibration and the lift hydraulic circuit match Ferrari's original specification for your model.
Perfect Fit
It mounts to your Ferrari's front suspension pick-up points with the correct dimensions and connects to the lift hydraulic circuit with the correct fittings.
Clean Cabin Air
Correct front suspension damping keeps the front body controlled at speed. This maintains the aerodynamic sealing around the nose that prevents high-velocity air from being forced into underbonnet areas near cabin intake paths.
Full Climate Efficiency
OEM hydraulic seals retain both the damping oil and lift fluid in the UAE heat across all operating conditions.
Fast Delivery
EuropeanAutoSpare ships this genuine Ferrari component fast to the UAE and worldwide with lift system compatibility and model confirmation before dispatch.
Need Help Finding the Right Parts?
EuropeanAutoSpare uses your VIN to confirm this is the correct nose lift front damper specification for your Ferrari. Lift system specifications vary significantly across Ferrari's model range.
Maintain Both Front Suspension Functions With the Right OEM Part
A genuine Ferrari Front Shock Absorber Vehicle Lift System 317752 keeps your front damping precise and your nose lift fully operational. Never replace a lift-equipped damper with a standard unit it disables a function you paid for and use on every low-speed manoeuvre.
Fitment Details
xFerrari Mid-Engine V8 Front Active Damper Fitment
| Model / Platform | Application Details (With Factory Vehicle Lifter) | Chassis Year Range |
|---|---|---|
| Ferrari 488 GTB | 3.9L Twin-Turbo V8 — Left or Right Front Axle Layout (Symmetrical Design) | 2016–2019 |
| Ferrari 488 Spider | 3.9L Twin-Turbo V8 — Convertible Sports Layout Front Axle Spec | 2016–2019 |
| Ferrari F8 Tributo | 3.9L Twin-Turbo V8 — Left or Right Front Axle Layout (Symmetrical Design) | 2020–2023 |
| Ferrari F8 Spider | 3.9L Twin-Turbo V8 — Modern Drop-Top Layout Front Axle Spec | 2020–2023 |
Technician’s Advisory: The front active shocks on these mid-engine V8 platforms utilize a symmetrical internal layout, allowing the core damper housing to fit interchangeability between the left and right sides of the front axle. However, because this specific listing exclusively supports models equipped with the factory **front vehicle lifter system**, the high-pressure hydraulic line ports and internal sealing rings must mate perfectly with the factory nose-lift collars. When fitting a replacement unit, never allow the internal MagneRide control wiring harness pigtail to twist or pinch, and execute a complete suspension system adaptation via diagnostic software to re-index the ride height baselines.
FAQs
xFrequently Asked Questions
Yes, this is a genuine Ferrari OEM front shock absorber with an integrated vehicle nose lift assembly (Part No. 317752). It is engineered strictly to Maranello's fine-tuned hydraulic and valving metrics to sustain baseline tracking and structural lift performance.
Installing a passive strut eliminates the dedicated hydraulic interface on that axle side. Depending on the system's software feedback parameters, this mismatch will completely disable the nose-lift control loop or cause severe, unsafe asymmetric vehicle leveling when the ride-height system is manually activated.
Key symptoms of a compromised nose-lift shock absorber include a visible reduction in ride-height clearance at one front corner, an onboard hydraulic lift system pump that cycles continuously to retain target line pressure, or an abrupt harshness in front-end damping behavior under normal track loops.
No, the dual pneumatic/hydraulic lift mechanism and the main active damper element are integrated into a single co-axial structural housing. If internal pressure seals weep fluid or variable valving fails, the entire combined strut assembly must be upgraded to ensure axle safety.
Yes, European Auto Spares provides fast, fully-tracked express shipping straight to the UAE and worldwide. We seal all advanced dual-chamber active struts inside heavily padded, reinforced enclosures to ensure the delicate high-pressure line fittings and electronic connector nodes remain pristine during transit.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
