Description
xShop Now Genuine Ferrari Fuel Pump with Filter Online – Part 282783
The Genuine Ferrari Fuel Pump with Filter 282783 delivers clean, correctly pressurised fuel through a complete OEM unit designed for direct installation. Ferrari engineers integrate the fuel pump and fuel filter into a single in-tank assembly to protect the entire fuel system at its source.
This genuine Ferrari pump draws fuel from the tank, immediately passing it through the integrated filter element before sending it to the injection rail. Filtering at this stage protects both the pump impeller and the high-precision fuel injectors from contamination. Ferrari’s high-pressure injection systems rely on extremely fine tolerances, where even small particles can affect injector spray patterns and combustion efficiency.
When the pump motor weakens or the filter becomes restricted, fuel pressure drops under heavy acceleration. This can lead to hesitation, lean conditions, or momentary power loss. Replacing the complete OEM assembly restores correct fuel pressure, filtration, and consistent engine performance.
For genuine Ferrari fuel system components, rely on European Auto Spares for trusted OEM parts and expert support.
Specifications
-
Brand: Genuine Ferrari OEM
-
Part Number: 282783
-
Type: In-Tank Fuel Pump with Integrated Filter
-
Condition: Brand new, genuine OEM
Why Choose EuropeanAutoSpare?
Genuine OEM Quality
Real Ferrari fuel pump and filter assembly with correct pressure and flow rate. Matches factory specs for consistent performance at all throttle levels.
Perfect Fit
Direct fit with correct flange, locking ring, and electrical connector. Complete assembly for easy installation without extra parts.
Clean Cabin Air
Sealed design keeps fuel vapour contained. Prevents fumes from reaching cabin air intake areas.
Full Climate Efficiency
Maintains stable fuel pressure even in high UAE temperatures. Ensures accurate combustion and smooth engine performance.
Fast Delivery
EuropeanAutoSpare ships genuine Ferrari parts worldwide quickly. Tank position and model confirmed before dispatch.
Need Help Finding the Right Parts?
EuropeanAutoSpare uses your VIN to confirm the correct fuel pump and filter assembly for your Ferrari model and tank configuration. Combined assemblies vary across Ferrari's model range in sender arm length, flange diameter, and connector type.
Service Both Fuel Functions in One Operation With the Correct OEM Assembly
A genuine Ferrari Fuel Pump with Filter 282783 restores clean fuel delivery at correct pressure with a single installation. Replace a failing assembly before fuel pressure drops affect your Ferrari's performance under demanding conditions.
Fitment Details
xFerrari LHS Low-Pressure Fuel Pump Fitment Guide
| Model / Platform | Application Details (Low-Pressure Fuel Delivery Circuit) | Year Range |
|---|---|---|
| Ferrari 458 Italia | 4.5L Naturally Aspirated V8 Left-Side Siphon Supply Assembly | 2010–2015 |
| Ferrari 458 Spider | 4.5L NA V8 Convertible Layout Left-Side Siphon Supply Assembly | 2012–2015 |
| Ferrari 458 Speciale / Aperta | 4.5L V8 High-Output Track-Focused Variant Left-Side Loop Spec | 2014–2015 |
| Ferrari 488 GTB / Spider | 3.9L Twin-Turbo V8 Engine Configurations Auxiliary Pick-Up System | 2016–2019 |
| Ferrari F12berlinetta | 6.3L Naturally Aspirated V12 GT Flagship Saddle Tank Module | 2013–2017 |
Technician’s Advisory: This assembly is strictly designed for installation inside the **Left-Hand Side (LHS)** chamber of the dual-pocket saddle fuel tank network. It features specialized internal siphon line connection ports and unique level sensor resistance scaling distinct from the components mounted on the right-hand side. When opening the fuel cell to replace this module, always discard the old viton sealing lock-ring gasket and install a brand-new factory component. Reusing a compressed or fuel-swollen tank seal will cause immediate evaporative emissions (EVAP) vapor leaks, triggering a check-engine warning on the dashboard layout.
FAQs
xFrequently Asked Questions
Yes, this is a genuine Ferrari OEM fuel pump assembly with an integrated filtration element (Part No. 282783). It is engineered strictly to Maranello's factory pressure margins and volumetric displacement curves, guaranteeing absolute fuel loop stability.
Positioning the micro-filtration media directly inside the modular housing shields the internal pump impeller from abrasive tank sediments while simultaneously protecting the downstream direct-injection rails. Furthermore, swapping a single unit simplifies fuel tank service, lowering overall labor overhead compared to managing split components.
Early structural indicators of pump fatigue include extended engine cranking times after sitting overnight, severe fuel starvation hesitation under full-throttle acceleration, an unusual loud whining or buzzing noise vibrating from the rear fuel cell, or physical fuel pressure values verified below the injection system's baseline requirements.
If the fuel level sender module is structurally integrated into this specific layout variant, it is automatically replaced as part of the core component overhaul. For designs where the sender is configured as a standalone assembly, it is highly recommended to inspect the internal potentiometer sweep lines during fuel service and upgrade if any signs of surface wear are found.
Yes, European Auto Spares provides fast, fully-tracked express shipping straight to the UAE and worldwide. We pack each precision fuel system component inside anti-static, hermetically-sealed protective wrapping and reinforced outer structural boxing to isolate the fragile level float arms, plastic line couplers, and pin connectors from transit shocks.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
