Description
xShop Now Genuine Ferrari Damper Online – Part 87374400
This Genuine Ferrari Damper 87374400 is a factory‑approved OEM gas strut designed specifically for the Ferrari 488 GTB rear engine cover lid. It supports and stabilizes the lid during opening and closing, providing smooth motion and reliable performance without unexpected drops or resistance.
Constructed to Ferrari’s original specifications, this damper ensures correct force delivery and secure engine bay access every time. Over time, gas dampers can lose pressure due to repeated use and exposure to heat and vibration, which can make the lid hard to open or cause it to close too quickly. Replacing an old, weak, or noisy damper with this genuine Ferrari part restores factory‑level operation and enhances safety.
Whether you are servicing your own vehicle, performing routine maintenance, or restoring a Ferrari 488 GTB, this damper is made to fit perfectly and perform consistently under real‑world conditions. You can purchase this OEM Ferrari part online from anywhere — not only within the UAE but globally, with secure shipping options available. Europeanautospares ensures the authenticity and quality of every part.
Specifications
- Brand: Ferrari
- Part Number: 87374400
- Product Type: Rear Lid Gas Strut / Damper
- Material: High‑grade corrosion‑resistant metal and sealed gas cylinder
- Condition: New OEM Genuine Ferrari Part
- Fitment Type: Direct replacement
- Original Equipment: Yes, Ferrari factory standard
-
Shipping: Worldwide, online orders supported
Why Choose European Auto Spares
Factory‑Approved Quality
This part is manufactured to meet Ferrari’s original factory standards, ensuring perfect compatibility and performance. You won’t need modifications, trimming, or forcing to install it. Europeanautospares guarantees the authenticity of every Ferrari part we supply.
Precise Fit & Smooth Operation
Unlike aftermarket replacements that can vary in strength and quality, this OEM damper provides consistent support and smooth lid operation just like the original that came with your car.
Durable & Reliable
Designed to withstand repeated use and the heat of the engine bay, this damper offers long service life and dependable performance.
Suitable for Everyday Driving
Whether your vehicle is driven daily or only on special occasions, this Ferrari damper performs reliably, maintaining lid stability and safety over time.
Worldwide Online Purchase
You can order this product not just in the UAE, but from anywhere online. Europeanautospares ships globally with secure delivery to your location.
Compatibility Support
Need help confirming if this part fits your specific vehicle? Our experts can verify part fitment with your VIN or model year to ensure correct selection.
Need Help Finding the Right Ferrari Part?
We are based in Dubai and serve customers worldwide. Connect with our auto specialists for expert support with part verification, compatibility, pricing, and warranty details. Our team can source the correct Ferrari spare parts and deliver them directly to your doorstep, locally or anywhere across the globe.
Maintain Proper Function & Safety
The rear lid gas strut may seem small, but it plays a critical role in opening and supporting the engine cover. A worn or failing damper can cause awkward lid movement, sudden closures, or difficulty accessing the engine bay, which can be inconvenient and unsafe. Replacing this component with a genuine Ferrari part preserves factory functionality and reduces unexpected issues.
Fitment Details
xFerrari 360 & F430 Shock Absorbers
Chassis & Handling Specification Matrix — Electronic Damping Assemblies
| Model / Generation | Application Details (Suspension / Shock Absorber — Front or Rear) | Year Range |
|---|---|---|
| Ferrari 360 Modena / Spider | Suspension / Shock Absorber (Front or Rear) | 1999–2005 |
| Ferrari F430 / Spider | Suspension / Shock Absorber (Front or Rear) | 2005–2009 |
Electronic Damping (Skyhook) Maintenance Notice
The 360 and F430 utilize an electronically controlled damping system (often referred to as the "Skyhook" system). These dampers are not standard mechanical struts; they contain complex internal solenoid valves that adjust damping rates in milliseconds based on chassis sensors.
Key Service Considerations:
Key Service Considerations:
- System Calibration: Replacing these shock absorbers frequently requires a diagnostic tool (such as an SD3 or equivalent) to perform a "re-initialization" of the suspension ECU. Failure to do so can result in the system defaulting to a "safe" mode or triggering a suspension warning light.
- Symmetry of Performance: Even if only one shock shows a leak, it is strongly recommended to replace them in axle pairs (both front or both rear). A mismatch in damping force between sides will significantly degrade high-speed stability and braking performance.
- Harness Protection: Ensure the electrical connector for the electronic adjustment is clean and properly secured. Moisture ingress into the connector is a common cause of intermittent suspension faults.
- Seal & Bushing Health: When replacing the shock, always inspect the upper mounting bushing and the lower spherical bearing (if applicable). These are high-wear components that, if worn, will cause "clunking" sounds that are often mistaken for failed internal shock valves.
FAQs
xFrequently Asked Questions
It supports and stabilizes the engine compartment lid (rear cover) when opening and closing, preventing sudden drops and making the operation smooth.
Yes, this is an authentic Ferrari factory part manufactured to original equipment specifications.
Signs include difficulty lifting the lid, jerky movement, strange noises, or the lid falling back down unexpectedly.
Absolutely, you can order it online from anywhere in the world, with secure shipping to your location.
No, this damper is a direct replacement part and installs in the same position as the original without modifications.
Aftermarket dampers may have inconsistent force ratings or quality, leading to improper lid support or shortened service life. A genuine Ferrari damper ensures proper performance.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
