Vendor: European Autospares Trading LLC
Genuine Lamborghini LH Engine Mounting 4M0199371FK
Dhs. 278.00
Vendor: European Autospares Trading LLC
Genuine Lamborghini LH Engine Mounting 4M0199371FK
Dhs. 278.00
Description
xShop Now Genuine Lamborghini Engine Mounting Left Online – Part 4M0199371FK
The Genuine Lamborghini Engine Mounting Left 4M0199371FK is an original OEM component designed specifically for the Lamborghini Urus V8 platform. This engine mount plays a critical role in securing the engine to the chassis while maintaining correct alignment, balance, and vibration control under all driving conditions.
In high-performance vehicles like the Lamborghini Urus, engine stability is extremely important. The mount helps absorb engine vibrations, reduce noise transfer to the cabin, and support the engine during acceleration, braking, and cornering. Without a properly functioning mount, excessive movement may place stress on surrounding components such as the transmission and drivetrain.
This left-side engine mounting (Part Number: 4M0199371FK) is manufactured according to Lamborghini’s factory specifications. It is built using high-strength materials designed to withstand torque load, heat cycles, and demanding road conditions. Because it is a genuine OEM part, it installs directly without modification or adjustment.
Engine mounts may require replacement if there are signs of cracking, unusual vibration, engine misalignment, or noise during gear changes. Timely replacement helps maintain driving comfort and protects related components from premature wear.
At Europeanautospares, we supply genuine Lamborghini spare parts to ensure accurate fitment and dependable long-term performance. This product is available for order and can be shipped not only within the UAE but also worldwide through secure online purchasing.
Specifications
- Brand: Lamborghini
- Part Number: 4M0199371FK
- Product Type: Engine Mounting (Left)
- Position: Left Side
- Condition: New
- Fitment Type: Direct OEM Replacement
- Application: Engine-to-chassis mounting support
-
Manufacturing Standard: Lamborghini factory specification
Why Choose European Auto Spares
Genuine Lamborghini Quality Assurance
At Europeanautospares, we supply factory-approved Lamborghini components that meet original engineering standards for safety, durability, and performance.
Precise OEM Fitment
This Lamborghini engine mount is manufactured to exact measurements for the Urus platform, ensuring direct installation without modification.
Designed for Performance Driving
The mount supports high torque output from the twin-turbo V8 engine, reducing vibration and maintaining structural stability even under demanding driving conditions.
Worldwide Online Ordering
You can purchase this part not only within the UAE but also online from anywhere in the world. We arrange secure international shipping with careful packaging to protect your order.
Compatibility Support
Our team can assist with VIN checks to ensure the correct Lamborghini spare part is supplied for your vehicle.
Need Help Finding the Right Lamborghini Part?
We are based in Dubai and serve customers worldwide. Connect with our auto specialists for expert support with part verification, compatibility, pricing, and warranty details. Our team can source the correct Lamborghini spare parts and deliver them directly to your doorstep, locally or anywhere across the globe.
Maintain Reliable Engine Stability
The Lamborghini Engine Mounting Left 4M0199371FK may appear to be a small component, but it performs a major function in overall vehicle balance and comfort. Proper engine mounting:
-
Reduces vibration and cabin noise
-
Maintains drivetrain alignment
-
Protects surrounding components
-
Supports consistent driving performance
Over time, worn mounts can cause excessive engine movement, which may affect gear shifts and overall ride quality. Replacing the engine mount with a genuine OEM component helps maintain the original engineering standards of the vehicle.
Europeanautospares ensures that each supplied part supports long service intervals and dependable daily performance, whether the vehicle is used for city driving or high-performance conditions.
Fitment Details
xLamborghini Urus Left-Side Active Engine Mount Fitment
Engine Base & Mounts Specification Matrix — Electronically Adjustable High-Load Hydraulic Torque Control Support Modules
| Model / Generation | Application Details (Engine Base & Mounts — Left-Side Electronically Adjustable Hydro-Mounts) | Year Range |
|---|---|---|
| Lamborghini Urus (Base) | 4.0L Twin-Turbo V8 (650HP) Front Left Torque Control Support Modules — Variable Damping Fluid Cell | 2018–2022 |
| Lamborghini Urus S | 4.0L Twin-Turbo V8 (666HP Luxury Spec) Active Hydraulic Chassis Links — Recalibrated Multi-Profile Solenoid | 2023–2024 |
| Lamborghini Urus Performante | Track-Focused 4.0L Twin-Turbo V8 (666HP) Hardened Active Engine Dampers — Competition Spec High-Durometer Matrix | 2023–2024 |
Sant’Agata Bolognese Dynamic Chassis Integration & Left-Bank Solenoid Control Notice
This professional-grade, electronically adjustable left-hand side (LHS) hydraulic engine mount assembly, variable-orifice switching solenoid, and high-load structural support module is configured strictly for the structural engine cradles of the 4.0-liter twin-turbocharged V8 Lamborghini Urus lineup. Bolted securely between the left cylinder block engine bracket and the high-strength aluminum front subframe crossmember, this active hydro-mount dynamically isolates the passenger compartment from harsh engine harmonics while controlling the massive, instantaneous engine torque reaction loads ($850\,\text{Nm}$ of torque) produced under full acceleration.
Critical Tamburo Drive Profile Calibration and Left-Bank Space Warnings: Technicians must understand that these active engine stabilizers function as part of the vehicle's multiplexed chassis control network. Controlled via real-time pulse-width modulated (PWM) signals from the engine control unit (ECU), the internal solenoid alters fluid restrictions within the mount's internal dual-chamber glycol wells to adjust stiffness. In *Strada* mode, the valve opens to maximize fluid travel, damping low-frequency engine vibrations for a smooth luxury ride. When shifting through the *Tamburo* selector into *Corsa* or *Trofeo* modes, the internal valve clamps shut instantly. This action restricts fluid migration, transforming the hydro-mount into a stiff performance block that stops engine pitch variation and locks down power translation to the all-wheel-drive system.
Never attempt to substitute a standard Urus S or Base model hydro-mount into a track-focused Urus Performante chassis, or apply low-tier non-electronic aftermarket reproductions to these platforms. The Performante configuration incorporates specialized structural parameters, deploying a hardened base elastomer matrix with altered static spring rates. Sourcing an incorrect or standard-compliance mount onto a Performante model will disrupt the chassis balance maps. Conversely, running a cheap non-electronic reproduction breaks the circuit loop, immediately flagging active fault codes (such as P178A/P178B engine mount actuator open-circuit errors) on the primary gateway and dropping the entire powertrain down into electronic safety limits.
Additionally, note that the left-side engine mount layout presents an entirely distinct packaging environment compared to the right-side engine bay quadrant. On LHD vehicles, the left mount assembly must wrap cleanly around the main steering shaft column gear and adjacent low-pressure power steering line paths.
Replacement and Mechanical Alignment Best Practices: Accessing the LHS active mount is a complex procedure that requires lifting the vehicle safely on an alignment rack, dropping the multi-piece aluminum underbody skid plates, and unbolting the left-side wheel arch splash shields. Technicians must utilize an engine support fixture from above or a hydraulic powertrain lift table from below to safely support the heavy aluminum V8 block casting before separating the structural engine mount fasteners.
Never jack directly against the fragile composite oil sump pan or the lower front crankshaft pulley lines. Raise the engine slightly—no more than a few millimeters—to relieve tension on the mount body. Carefully release the secondary plastic locking collar on the integrated wiring pigtail and pull it straight off. Unbolt the structural chassis flanged fasteners and extract the mount.
Prior to installing the new active mount, technicians must inspect the locating pins on the subframe seat to ensure absolute parallel indexing. Hand-thread all structural fasteners to prevent cross-threading the fine metric galleries. All load-bearing mount-to-subframe bolts must be replaced with brand-new factory stretch fasteners and torqued precisely to the factory specification manual: 60 Nm followed by an additional 90-degree torque-to-yield extension turn. Tighten the top engine-bracket engine-side flanged nut to **90 Nm**. Route the wiring loom cleanly away from moving axle shafts and hot turbo downpipes, secure it inside its factory heat-shield sleeve, and execute a comprehensive *Tamburo* systems adaptation cycle via master diagnostic equipment to clear lingering electronic tracking codes before final road testing.
PWM Solenoid-Actuated Fluid Valve Core
The heart of the active mount houses a micro-engineered, high-speed electromagnetic switching solenoid valve. Operating on variable pulse-width modulated currents, this core valve regulates internal hydraulic glycol flow restrictions within milliseconds, adjusting the mount's structural stiffness to match real-time throttle inputs and engine RPM frequencies.
High-Tensile Al-Zn Forged Casing & FKM Boots
The outer load-bearing structural enclosure is forged from premium high-grade aluminum-zinc superalloys to minimize unsprung weight while managing heavy tensile loads. The internal hydraulic fluid chambers are completely sealed by an outer multi-ply, high-fluorine Viton/FKM protective rubber boot that resists degrading when exposed to harsh engine oil wash and high-velocity road salt tracking.
FAQs
xFrequently Asked Questions
It secures the engine to the chassis, absorbs vibration, and maintains proper engine alignment during operation.
Yes, it is manufactured according to Lamborghini factory specifications for original equipment fitment.
Excessive vibration, unusual engine movement, knocking sounds, or misalignment during acceleration can indicate mount wear.
Yes, this specific part number refers to the left engine mounting position.
Yes, the product can be ordered online and shipped internationally, not only within the UAE.
You can verify fitment using your vehicle VIN or contact our parts specialists for assistance before placing your order.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
