Vendor: European Autospares Trading LLC
Genuine Land Rover Disc Brake Pad Wear Warning LR153547
Dhs. 186.00
Vendor: European Autospares Trading LLC
Genuine Land Rover Disc Brake Pad Wear Warning LR153547
Dhs. 186.00
Description
xShop Now Genuine JLR Wire – Brake Pad Wear Warning Online – Part LR153547
The Genuine JLR Wire – Brake Pad Wear Warning LR153547 is an original JLR brake pad wear sensor designed for modern Land Rover vehicles. This Land Rover brake wear warning wire monitors brake pad thickness and alerts the driver when replacement is required, helping maintain safe and consistent braking performance.
This OEM LR153547 sensor is connected directly to the brake pad and integrated with the vehicle’s onboard monitoring system. When the brake pad reaches its wear limit, the internal circuit triggers a dashboard warning light. This factory brake warning cable allows the driver to replace the pads at the right time and prevents unnecessary damage to brake discs.
Manufactured according to Jaguar Land Rover factory specifications, LR153547 ensures precise fitment and proper electrical communication. It installs easily without modification and works seamlessly as a genuine JLR brake component within the original braking system.
Although small in size, a rear brake wear indicator plays a critical role in vehicle safety. Replacing a worn or damaged sensor during brake service ensures accurate warning signals and maintains the vehicle’s original engineering standards.
This Range Rover brake pad sensor is suitable for selected 2022–2025 Range Rover models equipped with advanced braking systems.
Specifications
- Brand: JLR (Jaguar Land Rover)
- Part Number: LR153547
- Product Type: Brake Pad Wear Warning Sensor Wire
- Position: Rear (Left or Right, depending on application)
- Condition: New
- Fitment Type: Direct OEM Replacement
- Manufacturing Standard: Jaguar Land Rover Factory Specification
- Application: Brake pad wear monitoring system
- Electrical Integration: Compatible with factory brake warning system
Why Choose European Auto Spares
Genuine JLR Quality
At Europeanautospares, we supply original OEM parts manufactured to factory standards, ensuring correct fit and reliable performance.
Accurate Fitment
LR153547 is engineered specifically for compatible Range Rover braking systems and requires no modification.
Reliable Brake Monitoring
Using a genuine sensor ensures accurate dashboard alerts and protects brake components from premature wear.
Expert Assistance
The Europeanautospares team can assist with VIN checks to confirm compatibility before dispatch.
Worldwide Online Ordering
Europeanautospares makes this product available not only in the UAE but also for customers worldwide. You can order online from anywhere, with secure checkout and international shipping to your location.
Need Help Finding the Right JLR Part?
We are based in Dubai and serve customers worldwide. Connect with our auto specialists for expert support with part verification, compatibility, pricing, and warranty details. Our team can source the correct JLR spare parts and deliver them directly to your doorstep, locally or anywhere across the globe.
Maintain Reliable Braking Safety
Brake pad wear sensors are essential for maintaining braking safety and preventing costly repairs. The Genuine JLR Wire – Brake Pad Wear Warning LR153547 ensures your vehicle continues to deliver factory-level performance and accurate warning alerts.
Replacing the sensor during brake pad service supports long-term reliability and proper system communication. Using genuine OEM parts helps maintain your vehicle’s original safety standards and electronic precision.
Fitment Details
xRange Rover Rear Brake Wear Sensor Fitment
Drivetrain & Braking Specification Matrix — L460 & L461 Platform Rear Electronic Wear Monitoring Assemblies
| Model / Generation | Application Details (Drivetrain & Braking — Rear Brake Pad Wear Sensors) | Year Range |
|---|---|---|
| Range Rover (L460) | Rear Brake Pad Wear Monitoring Sensor — Electronic Contact Circuitry | 2022–2026 |
| Range Rover Sport (L461) | Rear Brake Pad Wear Monitoring Sensor — High-Temperature Conductive Lead | 2023–2026 |
JLR Powertrain & Chassis Dynamics Service Notice
This professional-grade electronic brake pad wear monitoring sensor, featuring a high-temperature resistant conductive lead, integrated terminal plug housing, and precision-molded contact tip, is engineered strictly for the L460 (Range Rover) and L461 (Range Rover Sport) rear brake assemblies. Mounted directly into the rear brake pad backing plate, this sacrificial circuit is designed to establish a closed-loop signal to the vehicle's Body Control Module (BCM). Once the friction material wears to the minimum threshold, the conductive tip contacts the rotor surface, breaking the electrical circuit and triggering the "Brake Pad Wear" warning on the digital instrument cluster.
Critical Electronic Diagnostics & Installation Warnings:
- Single-Use Logic: These sensors function as a "sacrificial" component. Once the sensor tip has been ground down by the brake rotor or if it has been triggered, it is impossible to reset or reuse. Mandatory replacement of the sensor is required during every rear brake pad service cycle.
- Electronic Resetting: Simply installing a new sensor is often insufficient to extinguish the warning lamp. Technicians must perform an electronic reset of the brake service indicator via a JLR-compatible diagnostic computer (e.g., SDD or Pathfinder) after the physical replacement is complete.
- Harness Routing: Ensure the sensor wiring is routed through the factory-prescribed retention clips. Failure to properly secure the excess cable length will lead to the wire chafing against the rim inner barrel, causing an immediate, false "worn pad" trigger, or worse, a permanent electrical short in the rear wheel speed sensor harness.
- Chemical Contamination: Keep the contact plug ends free of anti-seize or brake cleaning chemicals. Oxidation or chemical interference at the terminal plug can create high-resistance paths, resulting in intermittent warning alerts.
High-Heat Fluoropolymer Insulation
The sensor lead is insulated with a high-heat fluoropolymer jacket, capable of withstanding the extreme brake rotor thermal soak generated during heavy-duty towing or spirited driving cycles without losing flexibility or cracking.
Precision Conductive Contact Tip
The contact tip is manufactured from high-purity, soft-metal alloys engineered to provide a clean, reliable break in the electrical circuit once the friction material threshold is reached, ensuring accurate, noise-free diagnostic reporting to the BCM.
FAQs
xFrequently Asked Questions
It monitors brake pad thickness and activates a dashboard warning when replacement is required.
Yes, it is manufactured to Jaguar Land Rover factory specifications for OEM applications.
Yes, replacing the sensor during brake pad service ensures proper monitoring and avoids warning light issues.
Yes, a damaged or worn sensor may cause incorrect brake warnings.
You can verify fitment using your VIN or contact our parts team for assistance.
Yes, we offer secure online ordering and worldwide delivery, not limited to the UAE.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
