Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Land Rover Engine Crankshaft Assembly LR162092
Dhs. 1,043.00
Vendor: European Autospares Trading LLC
Genuine Land Rover Engine Crankshaft Assembly LR162092
Dhs. 1,043.00
Description
xProduct Overview
The Genuine Land Rover Rear Crankshaft Oil Seal LR162092 is the original rear crankshaft seal for the Land Rover applications listed below. It seals the rear end of the crankshaft where it exits the engine, keeping engine oil inside the crankcase and preventing leaks at the rear of the engine. A hardened, worn or incorrectly fitted rear seal is a common source of oil drips at the back of the engine and around the gearbox bell housing area.
Part Numbers & Reference Codes
OE part number: LR162092. Always order and verify by this OE number, because rear crankshaft seal dimensions and design vary by engine, and a seal that looks similar is not necessarily the correct one for your vehicle.
Vehicle Compatibility & Fitment
Catalogue listings for this seal cover the Land Rover Discovery Sport, the LR2 and the Range Rover Evoque in the year ranges shown in the Fitment Detail tab, in the rear crankshaft position. Engine and production date still matter within those ranges, so confirm by VIN before ordering.
Key Features & Benefits
- Original OE sealing: built to the factory specification for the rear crankshaft position, for a correct fit in the seal housing.
- Stops rear oil leaks: a fresh seal restores the oil tight joint at the rear of the crankshaft.
- Direct replacement: fits in place of the original rear seal, with no modification to the engine.
- New genuine condition: supplied as a new original part, not an aftermarket copy.
Technical Specifications
| OE Part Number | LR162092 |
| Brand | Land Rover |
| Product Type | Rear Crankshaft Oil Seal |
| System | Engine, rear crankshaft sealing |
| Position | Rear of the crankshaft, engine to gearbox side |
| Condition | New, Genuine OEM |
Installation Position & Fitment Notes
The seal sits at the rear of the crankshaft, at the engine to gearbox interface. Fitting it is normally done with the gearbox or flywheel area accessible, the crankshaft sealing surface must be clean and undamaged, and the seal must be driven in squarely to the correct depth without damaging its lip.
Product Brand, Type & Condition
Brand: Land Rover. Type: rear crankshaft oil seal. Condition: brand-new genuine OEM part, supplied exactly as the factory produces it.
What’s Included in the Box
This listing includes one (1) Genuine Land Rover Rear Crankshaft Oil Seal, OE part number LR162092.
Installation Requirements
Professional installation by a qualified technician is strongly recommended, because access requires work at the engine to gearbox interface. The sealing surface must be inspected for scoring or wear, the seal lip lightly lubricated as the workshop manual specifies, and the seal fitted squarely to avoid an immediate repeat leak.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Ready to stop that rear engine oil leak? Order the Land Rover Rear Crankshaft Oil Seal LR162092 from European Autospares Trading LLC, stocked in Dubai with fast delivery across the UAE. Not sure it fits? Contact us with your VIN and our parts team will confirm before you buy. Browse more genuine engine parts genuine Land Rover spare parts.
Fitment Details
xLAND ROVER REAR CRANKSHAFT SEAL FITMENT GUIDE
| Model | Model Year Range | Engine |
|---|---|---|
| Discovery Sport | 2015 – 2017 | Rear crankshaft oil seal |
| LR2 | 2013 – 2015 | Rear crankshaft oil seal |
| Range Rover Evoque | 2012 – 2017 | Rear crankshaft oil seal |
Technician’s Advisory: Inspect the crankshaft sealing surface for scoring or a wear groove before fitting, fit the seal squarely to the correct depth, and do not damage the seal lip during installation. A scored surface or a tilted seal will leak again immediately.
Important: This genuine Land Rover part is listed by OE part number LR162092 as a rear crankshaft oil seal, not a crankshaft assembly. Exact compatibility depends on the model, engine and production date, so send your complete VIN to the European Autospares parts team for verification before ordering.
FAQs
xFrequently Asked Questions
No. Despite the supplied title, catalogue evidence identifies LR162092 as a rear crankshaft oil seal, not a crankshaft assembly. It is the seal that sits at the rear of the crankshaft and keeps engine oil inside the engine. This page describes it honestly as a seal, so please check the OE number before ordering.
Catalogue listings cover the Discovery Sport from 2015 to 2017, the LR2 from 2013 to 2015, and the Range Rover Evoque from 2012 to 2017, in the rear crankshaft position. Engine and production date still matter within those ranges, so always confirm fitment with your VIN before ordering.
The usual sign is engine oil dripping from the rear of the engine, often visible around the gearbox bell housing area or on the ground under the rear of the engine. Oil loss, a low oil warning and oil contamination of nearby components can follow if the leak is left unattended.
Yes, it is normally a workshop job, because access to the rear of the crankshaft requires work at the engine to gearbox interface. The sealing surface must be inspected for scoring, the seal must be fitted squarely, and any related wear should be checked at the same time to avoid a repeat leak.
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it. We recommend VIN verification before ordering, so contact us first if you are unsure about fitment.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
