Description
xShop Now Genuine Maserati Outer Tie Rod Online – Part 673014360
The Genuine Maserati Outer Tie Rod 673014360 is an original steering component designed specifically for the Maserati Grecale platform. This OEM Maserati steering part connects the steering rack to the wheel assembly, helping transfer steering input smoothly and accurately to the road wheels. It plays an essential role in maintaining correct alignment, stable handling, and responsive control.
As a factory-engineered Maserati spare part, this outer tie rod is manufactured to exact original specifications. The dimensions, thread pitch, joint tolerance, and material strength are matched precisely to Maserati’s steering system requirements. This ensures direct replacement fitment without modification or adjustment beyond standard alignment procedures.
In high-performance SUVs like the Grecale, steering precision is critical. A worn or loose steering linkage can lead to uneven tyre wear, vibration, or reduced handling stability. Replacing the tie rod at the correct service interval helps protect the steering rack, suspension geometry, and overall driving comfort.
At Europeanautospares, we supply genuine Maserati components that meet factory standards for safety and durability. Whether for routine maintenance or steering repairs, choosing an OEM Maserati steering rack component ensures long-term reliability under daily driving conditions and demanding road environments.
This product is available to order and can be shipped not only within the UAE but also purchased online from anywhere in the world with secure international delivery options.
Specifications
- Brand: Maserati
- Part Number: 673014360
- Product Type: Outer Tie Rod / Steering Rack Component
- Position: Steering linkage (outer)
- Condition: New
- Fitment Type: Direct OEM replacement
- Material: Factory-specified forged steel and joint assembly
-
Manufacturing Standard: Maserati OEM specification
Why Choose European Auto Spares
Factory-Approved Maserati Quality
All components supplied by Europeanautospares follow original Maserati production standards. This ensures accurate steering geometry and dependable performance under real driving conditions.
Accurate Match for Application
This OEM Maserati steering part is designed specifically for the Grecale steering rack system. The joint movement, thread alignment, and structural integrity match factory calibration.
Suitable for Everyday and Performance Driving
From city driving to high-speed motorway use, the steering alignment component supports stable handling and predictable response.
Compatibility Checks Available
Our team can assist with VIN verification to confirm that part number 673014360 is correct for your specific Maserati configuration.
Worldwide Fulfilment
We are based in Dubai but ship globally. You can order this Genuine Maserati tie rod online from anywhere, not only within the UAE and receive reliable international delivery.
Need Help Finding the Right Maserati Part?
We are based in Dubai and serve customers worldwide. Connect with our auto specialists for expert support with part verification, compatibility, pricing, and warranty details. Our team can source the correct Maserati spare parts and deliver them directly to your doorstep, locally or anywhere across the globe.
Maintain Reliable Steering Performance
The outer tie rod may seem like a small suspension linkage, but it plays a major role in maintaining steering accuracy and tyre alignment. Over time, joints can wear due to road stress, heat cycles, and continuous movement. Replacing worn steering components with genuine parts protects the steering rack and prevents premature suspension wear.
Using original Maserati spare parts helps maintain factory driving dynamics. At Europeanautospares, we focus on supplying steering and suspension components that preserve the original engineering balance of your vehicle.
Replacing both sides when required and performing wheel alignment after installation ensures consistent handling and extended tyre life.
Fitment Details
xMaserati Grecale Outer Tie Rod End Fitment
Front Axle & Steering Specification Matrix — High-Precision Rack-and-Pinion Outer Linkage Ball Joints
| Model / Generation | Application Details (Front Axle & Steering — Outer Rack-and-Pinion Linkages) | Year Range |
|---|---|---|
| Maserati Grecale GT | 2.0L Turbocharged Inline-4 Mild Hybrid (MHEV — 250HP / 300HP) Outer Ends — Standard Response Comfort Joint | 2023–2026 |
| Maserati Grecale Modena | 2.0L Turbocharged Inline-4 Mild Hybrid (MHEV — 250HP / 330HP) Linkages — Sport-Tuned Low-Compliance Articulation Head | 2023–2026 |
| Maserati Grecale Trofeo | High-Performance 3.0L Twin-Turbo V6 Nettuno Engine (530HP) Steering Joints — Competition Spec High-Stiffness Track Link | 2023–2026 |
| Maserati Grecale Folgore | All-Electric (BEV — 400 kW / 544HP) High-Weight Capacity Outer Tie Rods — Heavy-Duty Max-Load Structural Assembly | 2024–2026 |
Modena Vehicle Kinematics & Electronic Steering Alignment Notice
This premium-grade mechanical front axle outer tie rod end assembly, internal low-friction spherical ball joint, and companion outer taper locking nut group is engineered strictly for the rack-and-pinion steering gear systems of the Maserati Grecale platform series. Threaded onto the inner tie rod axial shafts and taper-seated directly into the front aluminum wheel spindle steering arms, this critical linkage translates rotational input from the high-speed electric power steering (EPS) motor into precise, real-time tracking wheels adjustments, holding strict control over vehicle toe alignment boundaries during aggressive dynamic loading.
Critical Powertrain Weight Splits and Suspension Variation Warnings: Technicians, alignment specialists, and workshop tire engineers must note that while the Grecale footprint shares structural design commonalities across its modular layout, weight profiles and suspension tracking characteristics change drastically between trims. The baseline MHEV models (GT and Modena) run lightweight four-cylinder profiles. The Trofeo models mount the heavy twin-turbo V6 Nettuno engine, frequently riding on multi-level adjustable active air suspension tracks. Most critically, the all-electric **Grecale Folgore (BEV)** layout houses a massive under-floor battery array, shifting structural curbside mass significantly upward compared to the petrol lines.
Never cross-install or substitute a standard GT or Modena outer tie rod component into a high-performance Trofeo or an all-electric Folgore hub setup. Sourcing an entry-level or substandard alternative linkage onto these heavy or ultra-high-output models introduces severe risks of material fatigue and structural thread shearing. Under intense regenerative braking friction loads, rapid directional torque shifts, or full Nettuno launch-control phases, an under-specified tie rod end ball socket will flex or develop immediate play. This failure causes severe tracking drift, immediate high-speed steering wheel shudder, uneven front tire shoulder scrub, and catastrophic safety vulnerabilities if the ball joint shears out of its cup, completely severing steering link command over that axle side.
Special caution applies to the Folgore: its bespoke outer tie rod housings feature reinforced cross-sections and hardened internal polyoxymethylene (POM) ball seats designed to continuously bear the heavy instantaneous torque and high unsprung mass of the EV chassis tracking parameters.
Service, Disassembly & Jam-Nut Calibration Best Practices: Replacing an outer tie rod end requires stabilizing the vehicle on a drive-on alignment lift, unbolting the front wheels, and wire-brushing accumulated debris from the outer steering arm knuckle interface. Technicians must carefully count the exact number of counter-clockwise thread rotations or measure the lock-nut distance using precision vernier calipers prior to unthreading the spent component from the inner tie rod shaft. This tracking benchmark provides a baseline to prevent extreme, dangerous toe-out tracking errors during initial post-assembly roll-out.
Loosen the inner tracking jam nut. Remove the lower self-locking flange nut from the vertical ball joint stud. Never hammer directly against the threaded stud top or use generic wedge-style pickle forks to shock the connection loose; raw shock force will warp the aluminum knuckle arm casting, tear nearby wheel speed sensor wires, or destroy the wheel bearing housing. Deploy a dedicated mechanical ball joint separation puller to pop the taper cleanly out of its conical seat.
Clean out all scale deposits and oxidation from the knuckle bore hole using quick-drying solvents. Thread the replacement outer tie rod onto the inner rod shaft to the exact caliper measurement benchmark. Insert the taper stud parallel into the spindle eyelet, and torque the lower new factory-supplied locking nut strictly to 60 Nm. Hold the outer flat sections securely while locking down the inner tracking jam-nut to **80 Nm**.
Following any component installation across the Grecale steering linkage chain, a comprehensive four-wheel alignment is mandatory. Technicians must hook up specialized master diagnostics to perform a complete electronic recalibration of the Steering Angle Sensor (SAS) centering index within the electric power steering (EPS) computer system. Failure to execute this software re-zeroing routine will cause the stability controller to assume the vehicle is perpetually skidding, logging steering plausibility faults and permanently disabling adaptive advanced driver assistance safety networks.
Forged Carbon-Steel Shank & POM-Carbon Ball Seat
The primary linkage bodies are hot-forged from premium Class 10.9 equivalent high-tensile carbon-steel blocks to maximize yield strength against buckle forces. The internal articulation sphere rotates inside a specialized, carbon-fiber reinforced polyoxymethylene (POM) resin seat, reducing breakaway friction torque to ensure linear steering response under hard cornering loops.
Hermetically Sealed Polychloroprene Dust Shield
The critical internal grease chamber is hermetically isolated by a high-tear synthetic polychloroprene rubber boot anchored by dual spring-steel retaining rings. This premium barrier matrix blocks high-velocity water blast tracking, granular road grit, and winter salt slush from scoring the polished mirror ball surface, entirely preventing premature joint looseness.
FAQs
xFrequently Asked Questions
It connects the steering rack to the wheel hub assembly, transferring steering movement and maintaining proper wheel alignment.
Yes, this is an OEM Maserati steering rack component manufactured to factory specifications.
Yes. A damaged or loose tie rod can cause uneven tyre wear, vibration, knocking noises, or imprecise steering.
Replacement is recommended if there is steering play, noise from the front suspension, or during steering rack service.
Yes, professional wheel alignment is necessary after replacing steering linkage components.
Yes. You can purchase this part online from anywhere in the world. We provide international shipping with secure packaging and reliable courier services.
Share your VIN number with our specialists for accurate fitment confirmation before placing your order.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
