Vendor: European Autospares Trading LLC
Genuine Porsche Air Filter Cartridge 99111013000
Dhs. 265.00
Vendor: European Autospares Trading LLC
Genuine Porsche Air Filter Cartridge 99111013000
Dhs. 265.00
Description
xShop Now Genuine Porsche Air Cleaner Cartridge Online – Part 99111013000
This Genuine Porsche Air Cleaner Cartridge 99111013000 is engineered to maintain clean and balanced airflow into your Porsche engine. Designed according to factory specifications by Porsche, this OEM Porsche air filter ensures that dust, debris, and airborne particles are properly filtered before reaching sensitive engine components.
In high-performance vehicles such as the Porsche 911, Porsche Boxster, and Porsche Cayman, clean air intake plays an important role in maintaining engine efficiency and consistent power delivery. A worn or clogged filter may reduce airflow, affect throttle response, and lower overall engine performance. Replacing your Porsche air filter cartridge at recommended intervals helps protect the engine and maintain factory driving standards.
This part is manufactured to match the original dimensions and airflow requirements. It installs directly into the factory air cleaner assembly without modification, trimming, or adjustments. Because it is a genuine Porsche component, it maintains proper sealing within the intake housing to prevent unfiltered air from entering the engine.
At Europeanautospares, we supply original Porsche spare parts that meet OEM standards. This high-performance intake filter is suitable for routine maintenance, performance servicing, or scheduled air filter replacement. Whether your vehicle is used for daily driving or spirited performance runs, maintaining a clean intake system supports long-term engine reliability.
The filter media is designed to handle continuous airflow demands and varying environmental conditions. From hot climates to urban dust exposure, this OEM Porsche air filter supports consistent filtration efficiency throughout its service life.
You can order this product not only within the UAE but also online from anywhere in the world. We provide secure international shipping so Porsche owners globally can access genuine parts easily.
Specifications
- Brand: Porsche
- Part Number: 99111013000
- Product Type: Air cleaner cartridge / Engine air filter
- Material: OEM specification multi-layer filtration media
- Condition: New
- Fitment Type: Direct replacement
- Application: Engine air intake filtration
-
Manufacturing Standard: Porsche factory specification
Why Choose European Auto Spares
Factory-Approved Porsche Quality
At Europeanautospares, we supply genuine Porsche components manufactured according to original factory standards. This ensures accurate fit, correct airflow design, and long-term reliability.
Accurate Match for Application
The dimensions and filtration material are designed specifically for Porsche intake systems. This guarantees proper sealing inside the air cleaner assembly and dependable performance.
Suitable for Regular and Performance Driving
Whether your Porsche is driven daily or used for high-performance conditions, this OEM Porsche air filter maintains stable airflow and filtration efficiency.
Compatibility Checks Available
Our specialists can assist with VIN verification to confirm that the Porsche Air Cleaner Cartridge 99111013000 matches your vehicle requirements.
Worldwide Fulfilment
Based in Dubai, Europeanautospares delivers across the UAE and internationally. You can order this product online from anywhere, and we will ship it securely to your location.
Need Help Finding the Right Porsche Part?
We are based in Dubai and serve customers worldwide. Connect with our auto specialists for expert support with part verification, compatibility, pricing, and warranty details. Our team can source the correct Porsche spare parts and deliver them directly to your doorstep, locally or anywhere across the globe.
Maintain Reliable Engine Airflow Performance
The Genuine Porsche Air Cleaner Cartridge 99111013000 may appear to be a simple maintenance part, but it plays a crucial role in engine protection. Clean airflow supports efficient combustion, stable throttle response, and reduced internal wear. Over time, dust accumulation can restrict intake efficiency, making timely replacement important.
Using an OEM Porsche air filter ensures that the original engineering standards set by Porsche are preserved. Proper filtration helps reduce the risk of premature component wear and supports long service intervals.
Replacing the air filter during scheduled maintenance or alongside related service work helps maintain consistent system behavior. With genuine parts supplied by Europeanautospares, your Porsche continues to operate as designed by the manufacturer.
Fitment Details
xPorsche 991.1 Symmetrical Air Filter Fitment
Air Intake & Ducts Specification Matrix — Generation 991.1 Naturally Aspirated Flat-6 Symmetrical Twin Intake Elements
| Model / Generation | Application Details (Air Intake & Ducts — Symmetrical Induction Filter Elements) | Year Range |
|---|---|---|
| Porsche 911 Carrera (991.1) | 3.4L Naturally Aspirated DFI Flat-6 (350HP — MA1.04) Intake Filter Elements — Symmetrical High-Flow Twin Cartridges | 2012–2016 |
| Porsche 911 Carrera 4 (991.1) | AWD 3.4L Naturally Aspirated DFI Flat-6 Dual-Symmetrical Panel Sets — Rigid Polyurethane Border Matrices | 2013–2016 |
| Porsche 911 Carrera S (991.1) | 3.8L Naturally Aspirated DFI Flat-6 (400HP — MA1.03) Main Plenum Liners — High-Velocity Optimized Flow Media | 2012–2016 |
| Porsche 911 Carrera 4S (991.1) | AWD Widebody 3.8L Naturally Aspirated DFI Flat-6 High-Velocity Filters — Track-Calibrated Permeability Runs | 2013–2016 |
| Porsche 911 GTS (991.1) | High-Output 3.8L NA DFI Flat-6 (430HP) Factory Power-Kitted Core Elements — Symmetrical Sharp-Velocity Insets | 2015–2016 |
| Porsche 911 Targa 4 (991.1) | Open-Top AWD 3.4L Naturally Aspirated Engine Air Box Filter Cartridges — Acoustic Dampened Airway Sleeves | 2014–2016 |
| Porsche 911 Targa 4S (991.1) | Open-Top AWD 3.8L Naturally Aspirated Engine Induction Panel Elements — Reinforced Grid Structural Packs | 2014–2016 |
| Porsche 911 50th Anniversary | Anniversary Edition 3.8L Naturally Aspirated Flat-6 Performance Air Filters — Symmetrical High-Throughput Media Run | 2014 |
Stuttgart Powertrain Laboratory & Rear-Fender Induction Packaging Notice
This professional-grade, high-capacity symmetrical engine air cleaner matching element pair, incorporating injection-molded soft elastomeric polyurethane perimeter gaskets and structural stabilization ribs, is engineered strictly for the factory dual-entry induction housings of the naturally aspirated 3.4-liter and 3.8-liter Direct Fuel Injection (DFI) flat-six engine lineage (MA1.03, MA1.04, and MA1.03S architectures) powering the Porsche 991.1 generation. Tucked tightly beneath the rear spoiler frame and bumper skin quadrant, these symmetrical twin panels process rapid volumetric airflow columns needed to feed the variable-resonance intake plenums during intensive, high-load acceleration phases scaling past **7,400 to 7,800 RPM**.
Critical Generational Variations, Symmetrical Balancing & Sensor Protection Warnings: Technicians, workshop specialists, and parts supervisors must note that the 991.1 (2012–2016) naturally aspirated platform utilizes a unique **symmetrical dual-intake design matching left ($LH$) and right ($RH$) filter housings**. This layout is completely distinct from subsequent 991.2 generation turbocharged configurations, which shift to central intercooled single-filter elements. Sourcing a matched original-equipment level twin pack is mandatory to enforce balanced air-mass tracking and precise pressure metrics across both intake ducts.
... Never compromise these precise rear-engine sports cars by installing unreinforced low-tier economy filters or cheap oil-saturated cotton gauze elements. Sourcing a sub-tier or loosely fitting alternative introduces immediate structural and monitoring risks. Under aggressive wide-open-throttle operations, high-RPM suction tracks pull the media sheets inward. Flimsy paper pleats lack internal reinforcement mesh and will collapse, breaking the housing perimeter seal and allowing raw, unmetered road dust, tire soot, and track grit to bypass directly into the clean-side plenum. This unmetered debris fouls the hot wire grids of the mass airflow ($MAF$) sensors, triggering immediate bank-to-bank fuel adaptation errors, rough idling, mid-range flat spots ($P0101$, $P2187$, or $P2189$ fault loops), and severe high-RPM power restrictions as the DME scales back active engine timing maps.
Special caution applies to elite GTS variants and the 50th Anniversary edition running the factory Carrera S Powerkit ($X51$ option): these high-output variants execute modified throttle body geometries and aggressive variable-valve scaling profiles that multiply scuttle scissoring vacuum forces, rendering absolute perimeter border sealing mandatory.
Invasive Rear Bumper Removal & Alignment Best Practices: Sourcing a fresh set of air filter elements on the 991.1 chassis **cannot be executed via the upper decklid cooling fan vents; maintenance strictly mandates full removal of the rear bumper fascia assembly**.
Move the vehicle onto a frame lift, back off the upper decklid screws, separate the rear wheel arch inner liners, and safely disconnect the primary rear electrical wiring harnesses parallel. Unbolt the perimeter chassis fasteners and slide the complete bumper skin structure away from the tail shell panel. Technicians must place the unbolted bumper assembly flat on a padded stand or foam moving blanket to avoid scratching the mirror-finish factory paintwork along the lower apron lines.
Clean the exterior of the plastic dual-entry airbox housings before opening to prevent trapped sand and dust from dropping into the clean throttle body tubes. Unsnap the retention covers, slide out the spent filters, and **utilize a specialized shop vacuum to clean out accumulated autumn leaves, granular stones, and sand silt collecting directly behind the side decklid intake screens**.
Wipe down the gasket track with an oil-free cleaning spray. Lightly align the fresh matching filters parallel into their designated left and right tracking slots, checking that the soft polyurethane perimeter borders sit completely square without buckling or crimping. Snap the housing doors firmly shut, reinstall the bumper fascia casting, and torque all structural body bolts in sequence back to factory manual specifications. Execute a digital diagnostics sweep to verify baseline mass airflow sensor readouts before executing a final road test validation run.
Melt-Blown Multi-Layer Synthetic Micro-Fleece Sheets
The primary filter medium is constructed from advanced, multi-layer melt-blown synthetic micro-fleece fibers arranged in a dense, high-surface-area pleat profile. This technical engineering achieves exceptional fine particulate capture limits down to $3\,\mu\text{m}$ boundaries, maintaining complete engine intake tract purity and excellent air column velocity during sustained high-load track or highway runs.
Reinforced internal Polyurethane (PU) Structural Rib Stabilizers
The clean-side interior core of each panel filter block is stabilized by an integrated, molded polyurethane structural rib system. This rigid polymer reinforcement completely prevents pleat distortion, material crushing, or media implosion when subjected to severe under-hood induction vacuum forces during maximum high-RPM sweeps ($>7,500\,\text{RPM}$).
FAQs
xFrequently Asked Questions
It filters dust and airborne particles from incoming air before it reaches the engine, helping maintain clean combustion and engine protection.
Yes, this is a genuine OEM Porsche air filter manufactured to meet factory specifications.
Yes. A clogged filter may restrict airflow, reduce throttle response, and impact fuel efficiency or overall performance.
Replacement is typically recommended during scheduled maintenance intervals or when airflow restriction is observed.
Yes, it is suitable for select 911 GT3 and related performance variants equipped with compatible engines.
You can verify fitment using your vehicle VIN or contact our Porsche parts specialists for assistance before placing your order.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
