Description
xGenuine Porsche Mechanical Alignment Pin 13933570 - Factory-Precise Panel Alignment
The Genuine Porsche Mechanical Alignment Pin 13933570 is the small OEM hardware that lets body technicians set panels exactly where Porsche designed them to sit. When a door, bonnet, or removable panel is refitted after repair or service, this genuine pin establishes the correct alignment reference so gaps stay even and fixings seat without force. Using the factory pin protects the panel edge, the mounting hardware, and the precise shut lines that define a Porsche.
A panel can be torqued down and still sit wrong. The 13933570 alignment pin locates the panel against its factory reference point before any fixing is tightened, so the panel follows the body's original geometry instead of being pulled into position under stress. When this pin is missing, worn, or substituted with generic hardware, technicians often compensate by overtightening fixings, which distorts the panel, stresses the mounting points, and produces uneven gaps that only become obvious in daylight.
How the Alignment Pin Works
Alignment pins are fixed reference dowels used at panel guide and hinge locations. The pin seats in a precision-machined bore or guide on the body structure and registers the panel into the exact position Porsche specified at the factory. Because the panel is located by the pin first, the surrounding fixings simply clamp it in place rather than dragging it into alignment. This is how the factory achieves the tight, uniform shut lines Porsche bodywork is known for.
Signs Your Alignment Pin Needs Attention
A missing or damaged alignment pin usually reveals itself after panel removal. The panel refuses to sit flush, the gap is wider on one side than the other, or the same fixings need different torque to feel seated. A technician may find the guide bore empty after a previous repair, or discover the original pin has been crushed or replaced with a generic substitute that does not hold the panel firmly. In each case, refitting the genuine 13933570 pin is the correct fix rather than forcing the panel with extra torque.
Why Genuine Matters for Alignment Hardware
An alignment pin only works if it matches the factory reference geometry. The genuine Porsche 13933570 is manufactured to the original equipment specification for the guide location it serves, so it registers the panel exactly as the factory intended. Generic dowels and improvised pins may be a fraction off in fit, which defeats the purpose of a reference point entirely: a panel located by the wrong reference is still misaligned, and the fixings carry loads they were never designed to carry. For precision bodywork, the OEM pin is the baseline everything else is measured against.
Fitting Notes
Fitting is a straightforward job for a trained body technician during panel removal and refitting. The guide location is cleaned and inspected, the new genuine pin is seated in the original reference position, and the panel is registered onto the pin before any fixing is tightened. Fixings should then be torqued to the factory specification. Professional fitting is recommended, since correct panel alignment depends on seating the pin fully in the guide before the panel is offered up.
Specifications
| Brand | Genuine Porsche |
| OE Part Number | 13933570 |
| Part Type | Mechanical Alignment Pin |
| Application | Body panel alignment and location |
| Fitment | Porsche models — confirm exact application with your VIN |
| Condition | Brand new, genuine OEM |
| Packaging | Genuine Porsche factory packaging |
| Installation | Direct OEM replacement; professional fitting recommended |
Genuine vs Aftermarket Comparison
| Feature | Genuine Porsche 13933570 | Generic / Aftermarket Pin |
|---|---|---|
| Reference geometry | Matches factory alignment point exactly | May locate the panel slightly off true |
| Seat in guide bore | Precision fit, registers positively | Loose or tight fit — pin can shift or jam |
| Corrosion resistance | Finished for the body environment | Uncoated pins can corrode and seize in the bore |
| Panel gap consistency | Factory shut lines restored | Uneven gaps can persist after refitting |
| Fixing load | Fixings clamp, not drag, the panel | Fixings may carry alignment loads they are not designed for |
| Rework risk | Right first time with correct reference | Repeat adjustments waste paint and labour hours |
Verification note: Compared against the genuine parts catalogue data held for Porsche 13933570 (checked 2026-10-13). Generic-pin behaviour described from common aftermarket fitment issues reported by body workshops.
Why Choose European Auto Spares
Factory-Accurate Alignment Reference
This genuine Porsche pin registers the panel against the exact reference point Porsche designed, so shut lines come out even and fixings seat without forcing.
Built to the OEM Guide Specification
Made to the original equipment specification for its guide location, the pin seats positively and holds the panel firmly during refitting.
Resists Corrosion in the Body Environment
The factory finish protects the pin inside the guide bore, so it will not seize or corrode in place the way an unfinished substitute can.
Body-Shop Friendly
Direct OEM replacement that seats in the original guide position during normal panel refitting, with no modification or improvisation required.
Worldwide Delivery, Carefully Packed
We ship genuine Porsche body hardware worldwide in factory packaging, so precision small parts arrive undamaged and ready to fit.
Need Help Finding the Right Porsche Part?
Small body hardware is easy to confuse between model years, and alignment locations differ across the Porsche range. Send us your complete VIN and our parts team will confirm the exact 13933570 application for your car before processing your order. That way the correct pin arrives the first time, ready for your body technician to seat during panel refitting.
Complete the Job
If you are refitting front-end bodywork, you may also need the Porsche Genuine Front Hood Shock 99751155101 to restore correct bonnet lift support, or browse the full Body & Exterior Parts collection for panels, hardware, and fixings. For door hardware alongside alignment work, see the Genuine Porsche Rear RHS Door Lock 9A783911600. For equivalent body alignment hardware on a Bentley, we stock the Genuine Bentley Front Hood Shock 3W0823475E.
Keep Your Porsche's Panel Gaps Perfect
Even shut lines start with a correct reference point. Order the Genuine Porsche Mechanical Alignment Pin 13933570 from European Auto Spares and give your technician the factory pin your Porsche's bodywork was designed around. Order today for genuine OEM body hardware with worldwide delivery.
Fitment Details
xPorsche Mechanical Alignment Pin 13933570 Fitment
| Porsche Model | Application |
|---|---|
| Porsche range (VIN-verified) | Body panel guide / alignment pin location |
Technician's Advisory: Guide and alignment pin locations differ across Porsche models, generations, and production years. Do not rely on a model list alone — send us your complete VIN and our parts team will confirm the exact 13933570 application for your car before dispatch. During refitting, seat the new genuine pin fully in the original guide position and register the panel onto it before tightening any fixing.
FAQs
xFrequently Asked Questions
The 13933570 is a genuine Porsche mechanical alignment pin. It seats in the body guide location and gives the panel a fixed factory reference point, so it locates correctly before any fixing is tightened. This restores even shut lines and stops technicians overtightening fixings to drag a panel into position, which stresses panels and mountings.
Replace it when a panel will not sit flush after removal for paint or repair, or the gap is wider on one side than the other. A technician may find the guide bore empty, the original pin crushed, or a generic substitute that does not hold the panel firmly. Uneven force on the fixings during refitting is another tell-tale sign.
This is a genuine Porsche part for body panel alignment applications, but guide locations vary across models and years. Send us your complete VIN before ordering and our parts team will confirm the exact 13933570 application for your car. This avoids fitting the wrong hardware and ensures the pin seats positively in your guide location.
No. An alignment pin only works when it matches the factory reference geometry exactly, and a generic dowel that is fractionally off defeats the purpose entirely. Generic pins can also fit loosely or jam in the guide bore, and uncoated ones may corrode and seize in place. The genuine Porsche 13933570 is made to the original specification.
This is a brand-new genuine Porsche part in factory packaging, covered against manufacturing defects under the standard genuine parts warranty, and your statutory consumer rights apply in the UAE. If the part arrives damaged or incorrect due to our error, we will replace or refund it. We verify your VIN before dispatch to reduce ordering mistakes.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
