Description
xShop Now Genuine Porsche Brake Pad Online – Part 99635194913
The Genuine Porsche Brake Pad 99635194913 is engineered specifically for selected models of the Porsche 911 (996) to deliver dependable and controlled braking performance. In high-performance vehicles, brake components must respond instantly and consistently. This OEM Porsche brake pad is manufactured to meet factory specifications, ensuring balanced braking, reduced vibration, and proper pedal feel.
Brake pads are a critical part of the high-performance braking system. Worn or low-quality pads can cause uneven braking, noise, or excessive rotor wear. Using genuine Porsche spare parts helps maintain the original braking characteristics intended by the manufacturer. The 99635194913 brake pad is designed for smooth engagement with the brake disc, helping drivers maintain confidence in daily driving as well as spirited performance use.
Material quality plays an important role in stopping efficiency. This Porsche brake pad is produced using OEM-grade friction material that supports stable braking under repeated heat cycles. Whether driving in city traffic or at higher speeds, the pad compound is designed to maintain predictable friction levels without sudden fade.
During routine Porsche 911 brake maintenance, replacing brake pads at the correct interval protects brake discs and supports overall system health. Technicians often recommend genuine parts because they are developed specifically for the vehicle’s braking system geometry and electronic calibration.
At Europeanautospares, we supply factory-fit Porsche pads that meet original engineering standards. Each brake pad is carefully handled and delivered to ensure it arrives in new condition, ready for installation.
Specifications
- Brand: Porsche
- Part Number: 99635194913
- Product Type: Brake Pad
- Material: OEM specification friction compound
- Condition: New
- Fitment Type: Direct replacement
- Application: Front or rear braking system (depending on model specification)
-
Manufacturing Standard: Porsche factory specification
Why Choose European Auto Spares
Factory-Approved Porsche Quality
All genuine Porsche brake components we supply follow original manufacturer standards to ensure safe and reliable braking performance. Europeanautospares ensures every part maintains OEM integrity.
Accurate Match for Application
The Genuine Porsche Brake Pad 99635194913 is produced to match the original dimensions and friction rating required for the Porsche 996 braking system. No modification is needed during installation.
Designed for Everyday and Performance Driving
These Porsche brake pads are suitable for both regular driving and performance-focused conditions. The friction material supports stable heat management and consistent stopping power.
Compatibility Checks Available
Our team can verify compatibility using your VIN to ensure you receive the correct Porsche spare part for your exact vehicle specification.
Worldwide Fulfilment
You can purchase this product not only in the UAE but also online from anywhere in the world. We provide secure packaging and reliable international shipping options so customers globally can access genuine Porsche spare parts.
Need Help Finding the Right Porsche Part?
We are based in Dubai and serve customers worldwide. Connect with our auto specialists for expert support with part verification, compatibility, pricing, and warranty details. Our team can source the correct Porsche spare parts and deliver them directly to your doorstep, locally or anywhere across the globe.
Maintain Reliable Braking Performance
Brake pads may seem like a simple component, but they are essential for safety and driving control. The Genuine Porsche Brake Pad 99635194913 helps maintain proper braking balance, protects brake discs from uneven wear, and ensures smooth pedal response.
Replacing worn brake pads on time prevents vibration, noise, and reduces stopping distance. Over time, genuine OEM Porsche pads contribute to a consistent braking feel and help preserve the original engineering standards of your Porsche 911.
Fitment Details
xPorsche Front Iron System Brake Caliper Fitment
| Porsche Model / Generation | Application Details (Front Axle — Iron Brakes Only) | Year Range |
|---|---|---|
| Porsche 911 Turbo (996) | 3.6L Twin-Turbo Flat-6 (Coupe & Convertible) 4-Piston Monobloc Front Unit | 2001–2005 |
| Porsche 911 Carrera 4S (996) | 3.6L Wide-Body Platform (Turbo Chassis/Suspension) 4-Piston Monobloc Front Unit | 2002–2005 |
| Porsche 911 GT3 (996.1) | 3.6L Naturally Aspirated Track Spec (Early Series) 4-Piston Monobloc Front Unit | 1999–2002 |
| Porsche 911 Carrera S / 4S (997.1) | 3.8L Generation 1 Performance Trims 4-Piston Monobloc Front Unit | 2005–2008 |
Technician’s Advisory: This front caliper application profile is configured **strictly for factory standard cast-iron braking packages**. It is completely incompatible with, and will not bolt onto, high-performance variants equipped with optional factory Carbon Ceramic Braking (PCCB) matrices, which feature entirely different yellow-coded caliper casting dimensions, radial mounting bolt offsets, and altered rotor gap clearances. When replacing or overhauling this assembly, always discard the single-use factory caliper mounting bolts and replace them with brand-new hardware torqued strictly to factory technical specifications to prevent aluminum thread binding or upright grid distortion. Following physical installation, execute a comprehensive hydraulic pressure bleed sequence using clean DOT 4 low-viscosity fluid across both the inner and outer bleed nipples to completely eliminate any air pockets from the internal crossover fluid lines.
FAQs
xFrequently Asked Questions
This high-friction performance brake pad set is engineered specifically for selected variants within the Porsche 911 (996 generation) platform. Because caliper dimensions, piston arrays, and rotor profiles alter across Carreras, Targas, and Turbo models, full VIN verification is highly recommended to ensure precise axle compatibility.
Yes, this is an authentic, genuine Porsche OEM front brake pad kit (Part No. 99635194913). It is manufactured to strict Stuttgart factory specifications, matching original backing plate tension, noise-reduction backing shims, and high-performance friction compound compounds.
Replacement cycles depend entirely on personal driving styles, thermal tracking, and daily environment variables. These pads are typically inspected during routine scheduled services or tire rotations and must be updated immediately when the friction lining reaches minimum thickness parameters or triggers a dashboard warning.
Yes, severely. Driving on friction linings worn past safe limits shifts extreme thermal stress directly into the calipers and leads to metal-on-metal backplate contact. This quickly scores, grooves, or warps the expensive brake discs, compromising stopping power and causing higher secondary repair costs.
Yes, you can order the Genuine Porsche Brake Pads 99635194913 online through European Auto Spares from any country globally. We provide fast, fully-tracked international express shipping, packing the complete set inside moisture-sealed protective insulation and rigid outer boxes to shield the friction edges from transit impact.
Because brake system layouts, caliper backing clearances, and electronic wear sensor configurations alter precisely based on specific model years, engine trims, and factory suspension packages, please share your 17-digit VIN with our parts specialists before checking out to guarantee an absolute match.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
