Beschreibung
xBentley Suspension Bush 3Y0407171A - Quality Aftermarket
The Bentley Suspension Bush 3Y0407171A is a quality aftermarket replacement for the front lower suspension lever bush (leading). This bonded-rubber bush carries the constant load between the lower wishbone and the chassis, and when it perishes, the front end develops knocks, vague steering, and uneven tyre wear. Built to the OE reference dimensions, this aftermarket bush presses into the original arm for a direct repair — restoring a quiet, settled front end at a fraction of the dealer part price.
What the Leading Lower Lever Bush Does
The front lower suspension lever bush (leading) sits at the inner pivot of the lower wishbone, where the arm bolts to the subframe. It is a bonded-rubber bush: a steel sleeve vulcanised to a rubber core that allows the arm a controlled range of movement while isolating vibration and road harshness from the body. On Bentley's Arnage-derived chassis and the Mulsanne, this bush takes the brunt of braking and cornering loads, so its condition directly affects steering precision, ride refinement, and tyre life.
Signs the Bush Has Perished
A perished lever bush usually shows up as a dull knock or thud from the front over bumps, vague steering that wanders at motorway speed, and accelerated wear on the inner or outer tyre edges. The car may also feel unsettled under braking as the wishbone shifts on its worn pivot. Rubber degrades with age, heat, and oil contamination, so these bushes are a routine replacement item on older Bentleys — a technician can confirm failure by checking for play and cracked or separated rubber at the bush.
Why This Quality Aftermarket Bush Makes Sense
When the wishbone arm itself is straight and sound, replacing only the bush is the sensible repair. This quality aftermarket bush is made to the OE reference dimensions of 3Y0407171A, so it presses into the original arm with the correct interference fit and restores the factory ride and steering feel. It delivers the same repair outcome as the genuine part at a significantly lower price. What sets it apart from cheap no-name bushes is the quality of the bonded rubber — consistent compound, proper vulcanising, and a sleeve that stays put instead of walking out under load.
Fitting Notes for Your Technician
Bush replacement is a press job, not a driveway repair. The wishbone comes off the car, the old bush is pressed or burned out, the bore is cleaned, and the new bush is pressed in with correct orientation using proper tooling — hammering a bonded bush in by hand risks damaging the rubber bond. The arm is then refitted with fasteners torqued to specification, and a wheel alignment check is recommended afterwards. It is worth inspecting the remaining bushes on the same arm while it is off the car.
Specifications
| Supply Type | Aftermarket (OE reference 3Y0407171A) |
| OE Reference Number | 3Y0407171A |
| Related Supersessions | 3Y0407171, 3Z0399419, PD100811PA |
| Part Type | Front Lower Suspension Lever Bush (Leading), bonded rubber |
| Construction | Rubber bonded to metal sleeve |
| Position | Front lower wishbone, inner leading pivot |
| Fitment | Bentley Arnage range, Azure, Brooklands, Mulsanne — confirm with VIN |
| Condition | Brand new |
| Price | AED 227.00 |
| Availability | Supplied to order — contact us for current lead time |
Quality Aftermarket vs Cheap No-Name Comparison
| Feature | Quality Aftermarket Bush 3Y0407171A | Cheap No-Name Bushes |
|---|---|---|
| Dimensional accuracy | Made to OE reference dimensions, correct press fit | Size can vary; loose or over-tight fit |
| Rubber quality | Consistent bonded-rubber compound | Hardens or cracks early with heat |
| Sleeve retention | Vulcanised bond stays put under load | Sleeve can walk out of the arm |
| Noise and vibration | Restores quiet, settled front end | Transmits harshness and knocks |
| Service life | Durable, like-for-like repair | Short-lived; repeat labour costs |
| Value | Fraction of the dealer genuine part price | False economy once labour is counted |
Verification note: Fitment and supersession data cross-checked against independent Bentley parts specialists (introcar.com and flyingspares.com), accessed 2026-10-08. This is an aftermarket part referencing OE number 3Y0407171A — it is not a genuine Bentley part. Construction described as bonded rubber per independent listings.
Why Choose European Auto Spares
OE-Reference Fit
This bush is built to the dimensions of OE number 3Y0407171A, so it presses into the original wishbone correctly and restores factory geometry.
Quality Bonded Rubber
We stock quality aftermarket bushes with properly vulcanised rubber, not the cheap copies that harden, crack, or walk out of the arm within months.
Dealer-Price Savings
When the arm itself is sound, a quality bush repair costs a fraction of a full genuine assembly — the smart fix for an ageing Bentley.
VIN-Verified Before Dispatch
Bush applications vary across the Arnage range, Azure, Brooklands, and Mulsanne. We confirm the exact fitment against your VIN before the part leaves us.
UAE-Based, AED Pricing, Worldwide Shipping
Order in AED from a European parts specialist with careful packaging, so your suspension components arrive ready for the workshop.
Need Help Finding the Right Bentley Part?
Suspension bush applications vary across Arnage variants, Azure, Brooklands, and Mulsanne model years, and several similar-looking bushes exist in the same arms. Send us your complete VIN before ordering and our parts team will confirm that 3Y0407171A is the correct front lower leading lever bush for your car. The part arrives ready for professional press-fitting.
Complete the Job
Suspension bushes wear in sets - replace one and inspect the rest. Pair it with the Genuine Bentley Front Left Upper Control Arm 3W0407509, the Genuine Bentley Front RH Upper Control Arm 3W0407506, or the Genuine Bentley Mulsanne Engine Mount 3Y0199384A while the front end is apart. See the Suspension & Steering Parts collection for the full assembly range.
Fix That Front-End Knock Properly
A perished lower lever bush is one of the most common causes of front-end knocks on older Bentleys, and it is also one of the most economical to fix — when the bush quality is right. Order the Bentley Suspension Bush 3Y0407171A from European Auto Spares and restore a quiet, precise front end without paying dealer prices for a whole new arm.
Passformdetails
xBentley Front Lower Lever Bush Fitment
| Bentley Model | Application |
|---|---|
| Bentley Arnage (all variants) 1998–2009 | Front lower suspension lever bush (leading) |
| Bentley Azure 2006–2010 | Front lower suspension lever bush (leading) |
| Bentley Brooklands Coupe 2009–2010 | Front lower suspension lever bush (leading) |
| Bentley Mulsanne 2011–2021 | Front lower suspension lever bush (leading) |
Technician's Advisory: Bush applications vary across model years and chassis, and several similar-looking bushes exist in the same wishbones. Always confirm exact fitment with your VIN before ordering — our team verifies compatibility before dispatch. Fitting is a press job: remove the wishbone, press the old bush out, clean the bore, and press the new bush in with correct orientation using proper tooling. Check wheel alignment afterwards.
Häufig gestellte Fragen
xFrequently Asked Questions
The 3Y0407171A is the front lower suspension lever bush (leading) — the inner pivot where the lower wishbone bolts to the subframe. It is a bonded-rubber bush: a steel sleeve vulcanised to a rubber core that allows controlled arm movement while isolating vibration from the body. Its condition directly affects steering precision, ride refinement, and front tyre life.
Typical signs are a knock or thud from the front over bumps, vague steering that wanders at speed, tyre edge wear, and an unsettled feel under braking as the wishbone shifts on its worn pivot. Rubber degrades with age, heat, and oil contamination. A technician can confirm failure by checking for play and cracked or separated rubber at the bush.
The 3Y0407171A reference covers the front lower leading lever bush on the Bentley Arnage range (1998–2009), Azure (2006–2010), Brooklands Coupe (2009–2010), and Mulsanne (2011–2021). However, bush applications vary by model year and chassis, so always confirm with your VIN. Send us your full VIN before ordering and our team will verify the exact application for your car.
This is a quality aftermarket bush, not a genuine Bentley part. When the wishbone arm is sound, it is the sensible repair — made to OE reference dimensions, it restores the factory ride at a fraction of dealer price. Bush quality matters most: cheap bushes harden, crack, or walk out of the arm, which this part is built to avoid.
This is a brand-new quality aftermarket part, covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or incorrect due to our error, we will replace or refund it. Bush fitment varies by model and chassis, so we verify your VIN before dispatch to ensure you receive the correct part.
Günstiger gefunden?
xVersand & Rückgabe
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Eine Auswahl führt zu einem vollständigen Neuladen der Seite.
