Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Hersteller: European Autospares Trading LLC
Genuine Lamborghini Urus Front Brake Pad Wear Sensor 4M0615121B
Dhs. 50.00
Hersteller: European Autospares Trading LLC
Genuine Lamborghini Urus Front Brake Pad Wear Sensor 4M0615121B
Dhs. 50.00
Beschreibung
xGenuine Lamborghini Urus Front Brake Pad Wear Sensor 4M0615121B - Accurate Dashboard Warning
The 4M0615121B is the genuine Lamborghini front brake pad wear sensor for the Urus, the small but critical component that warns you on the dashboard when your brake pads are worn to their limit. Without a working sensor, pad wear goes unnoticed until you hear grinding, by which point the brake discs may already be damaged. This genuine sensor restores the factory early-warning system, so you always know exactly when new pads are due.
What the Wear Sensor Does
Your Urus monitors brake pad thickness electronically so you never have to guess. The 4M0615121B sensor sits at the edge of the front brake pad; when the friction material wears down to the sensor contact, the electrical circuit changes and the brake pad warning light illuminates on the dashboard. It is a simple, proven design: no moving parts, no calibration, just a reliable signal at the right moment. Because it is made to Lamborghini's exact connector and wiring specification, it plugs into the Urus harness and communicates with the vehicle electronics exactly as the factory intended.
What Happens When the Warning Light Comes On
A brake pad warning light means your front pads have reached their minimum safe thickness, not a suggestion to check sometime, but a prompt to book a brake inspection now. Driving on after the warning wears through the remaining friction material, and once the backing plate contacts the disc you will hear grinding and risk scoring the discs. That turns a straightforward pad replacement into a far more expensive repair. The sensor did its job by warning you early; the right response is to act on it promptly with a full front axle pad replacement.
Why Fit a Genuine Sensor With New Pads
Wear sensors are single-use by design, once the sensor contact has been worn, it cannot be reused, so a new sensor belongs with every pad change. The genuine 4M0615121B carries the correct connector, wire routing, and trigger point for the Urus, which means the warning arrives at the right time, every time. Aftermarket sensors can suffer from loose connectors or incorrect trigger points, producing false dashboard warnings, or worse, silence when the pads are genuinely worn. For a small part that guards your braking safety and your expensive brake discs, the genuine sensor is the only sensible choice.
Installation Notes
The wear sensor should be fitted by a qualified technician together with a new set of front brake pads, never reuse a sensor from the old pads. Your technician will route the sensor wire through its factory clips and confirm the connector seats fully in the harness, then verify the dashboard warning is clear after the pad replacement. This is also the ideal moment to inspect the brake discs and check brake fluid condition. The complete job, genuine pads plus genuine sensor, restores the Urus braking system to full factory monitoring.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Lamborghini (Genuine OEM) |
| OE Part Number | 4M0615121B |
| Product Type | Brake pad wear sensor |
| Position | Front axle |
| Vehicle Fitment | Lamborghini Urus (2018 onwards) |
| Function | Triggers the dashboard brake pad warning at the wear limit |
| Design | Single-use; renew with every brake pad replacement |
| Condition | New, genuine OEM part |
| Packaging | Supplied in factory packaging |
| Warranty | Covered by genuine parts warranty |
Genuine 4M0615121B vs Aftermarket Wear Sensors
| Feature | Genuine 4M0615121B | Generic / Aftermarket |
|---|---|---|
| Connector fit | Exact OE connector for the Urus wiring harness | Loose or incompatible connectors cause faults |
| Warning accuracy | Triggers at the correct pad wear point | Can warn too late, or not at all |
| Wire durability | Rated for the heat and vibration of the brake environment | Brittle wires break early, causing false warnings |
| Service life | Single-use design matched to pad life | Reused or mismatched sensors give unreliable readings |
| System integration | Communicates correctly with Urus electronics | May trigger spurious dashboard errors |
| Physical fitment | Clips into the pad exactly as the factory intended | Poor fit can dislodge during driving |
Verification: OE part number 4M0615121B cross-checked against our catalogue record for the Lamborghini Urus; fitment confirmed for Urus (2018 onwards). Exact wire length and trigger specification are factory-confidential, confirm with your VIN before ordering. Checked 2026-10-08.
Why Choose European Auto Spares
100% Genuine Lamborghini Parts
We sell genuine OEM parts only, sourced through official channels and supplied in factory packaging with a verifiable OE part number. The 4M0615121B you receive is the exact sensor Lamborghini fits to the Urus, nothing generic, nothing "equivalent".
UAE Stock With Fast Dispatch
This wear sensor is held in stock in the UAE for prompt dispatch, so a warning light does not mean days of waiting. Order today and your Urus is back to full factory brake monitoring sooner.
VIN Verification Before Dispatch
Urus specifications can vary by model year and variant. Send us your complete VIN and our team confirms the 4M0615121B is the correct sensor for your car before we ship.
Complete-the-Job Advice
A sensor is almost always needed alongside new pads. Our team can confirm the matching genuine front brake pads set for your Urus, so you order everything the job needs in one go.
Genuine Parts Warranty and Easy Returns
This sensor is covered against manufacturing defects under the genuine parts warranty, and your statutory consumer rights apply in the UAE. If it arrives damaged or incorrect due to our error, we replace or refund it.
Complete the Job
Brake sensors flag worn pads - service them together. Check the Genuine Lamborghini Aventador Front Aero Wiper Blade 471955425A and Genuine Lamborghini Huracan Engine Air Filter 420133844E at the same visit, and the Genuine Maserati Front Brake Pads Kit 673012038 if you run both marques. The Brake System Parts collection has pads, sensors, and hardware.
Not Sure It Fits? Send Your VIN
Send us your complete VIN before ordering and our parts team will verify that the 4M0615121B front brake pad wear sensor is the correct application for your Urus. This free check takes the guesswork out of ordering. Contact us at sales@europeanautospares.com with your VIN and we will confirm fitment before dispatch.
Keep your Urus brake monitoring working exactly as Lamborghini intended. Order the genuine front brake pad wear sensor 4M0615121B from European Auto Spares today, in UAE stock, VIN-verified, and backed by the genuine parts warranty.
Passformdetails
xLAMBORGHINI BRAKE FITMENT GUIDE
| Model | Application | Year Range |
|---|---|---|
| Lamborghini Urus | Front brake pad wear sensor (pad wear indicator sender wire) | 2018–2024 |
| Lamborghini Urus S | Front brake pad wear sensor | 2023–2025 |
| Lamborghini Urus Performante | Front brake pad wear sensor | 2023–2025 |
Technician's Advisory: Brake pad wear sensors are single-use: once the warning circuit has triggered, the sensor must be replaced along with the pads. Route the new sensor cable exactly as the old one to keep it clear of rotating and hot brake components.
Important: This genuine Lamborghini part is listed by OE part number 4M0615121B. Exact compatibility depends on the model, variant, production date and equipment level. Send your complete VIN to the European Autospares parts team and we will verify this is the correct part for your vehicle.
Häufig gestellte Fragen
xFrequently Asked Questions
It monitors your front brake pad thickness and triggers the dashboard warning light when the pads reach their wear limit. The sensor sits at the pad edge; once the friction material wears down to it, the electrical circuit changes and the warning appears. It gives you advance notice so you can replace the pads before they damage the brake discs.
Book a brake inspection promptly. The warning means your front pads have reached their minimum thickness. Driving further wears through the remaining material and can score the brake discs, turning a pad replacement into a much more expensive repair. Replace the pads as a front axle set and always fit a new genuine sensor at the same time.
Yes, always. Brake pad wear sensors are single-use components, once the sensor wire has been worn through, it cannot be reused. Fitting a new genuine 4M0615121B sensor with every pad change ensures the warning system works accurately from day one. Reusing an old sensor risks false warnings or no warning at all.
Yes. The genuine 4M0615121B has the exact connector, wire length, and trigger point for the Urus wiring harness and electronics. Aftermarket sensors can have loose connectors or incorrect trigger points, causing false dashboard warnings, or worse, no warning when pads are worn. For a small part that guards your braking safety, genuine is the clear choice.
This is a brand-new genuine Lamborghini sensor in factory packaging, covered against manufacturing defects under the genuine parts warranty. Your statutory consumer rights apply in the UAE. If it arrives damaged or incorrect due to our error, we will replace or refund it. We recommend confirming your VIN before ordering so the sensor matches your Urus variant.
Günstiger gefunden?
xVersand & Rückgabe
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Eine Auswahl führt zu einem vollständigen Neuladen der Seite.
