Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Hersteller: European Autospares Trading LLC
Genuine Mercedes-Benz Fuel Filler Neck Pipe Assembly A1996390042
Dhs. 4,243.00
Hersteller: European Autospares Trading LLC
Genuine Mercedes-Benz Fuel Filler Neck Pipe Assembly A1996390042
Dhs. 4,243.00
Beschreibung
xProduct Overview
The Genuine Mercedes-Benz Fuel Filler Neck Pipe Assembly A1996390042 is the original fuel filler neck for the Mercedes-Benz SLR McLaren, listed in the factory catalogue under the description Filler Neck Tank Recess. It forms the body-side passage between the fuel filler flap and the fuel tank, guiding the pump nozzle during refuelling and channelling fuel safely into the tank recess. On a car as rare and valuable as the SLR McLaren, only the genuine factory component restores the exact fit, sealing geometry, and finish Mercedes-Benz specified for the 199 chassis.
Part Numbers & Reference Codes
OE part number: A1996390042, also written as A 199 639 00 42 or 1996390042. In the factory side wall and tank recess diagram it appears at position 130, with the separate bracket for the tank filler neck listed under A1996300036. Always order and verify by the full A1996390042 number, because filler neck components differ between Mercedes-Benz model lines and the 199 chassis parts do not interchange with other ranges.
Vehicle Compatibility & Fitment
This filler neck belongs to the Mercedes-Benz SLR McLaren, the 199 chassis grand tourer built with McLaren and produced from 2003 to 2010 with the 5.4 litre supercharged M155 V8. The catalogue diagram group covering this part is listed for 2003 to 2007 cars, and later SLR variants, including the Roadster and 722 editions, must be checked individually. Share your VIN with our parts team before ordering and we will verify A1996390042 against the factory catalogue for your exact car.
The SLR filler neck works with the standard filler cap and flap arrangement for the 199 body, and it is part of a fuel system designed around the SLR front-mid engine layout, where the tank sits behind the cabin. Because the neck also forms part of the visible filler recess, its profile affects how the flap and cap sit in the rear wing, so a pattern part with even small dimensional differences can leave the cap sitting proud or the flap misaligned. The genuine neck avoids those fit problems completely.
Key Features & Benefits
- Genuine SLR component: the original Mercedes-Benz filler neck for the 199 chassis, made to the factory profile for the tank recess.
- Correct refuelling geometry: the neck accepts the pump nozzle at the designed angle, supporting clean, splash-free filling.
- Factory sealing faces: machined and formed to the OE specification so the flap, cap, and tank connections seal as intended.
- Protects the fuel system: a sound filler neck keeps fuel vapour and liquid fuel contained, and keeps water and dirt out of the tank.
- Right part for a rare car: with only 2,157 SLR McLarens built, the genuine numbered part protects originality and value.
Technical Specifications
| OE Part Number | A1996390042 |
| Brand | Mercedes-Benz |
| Product Type | Fuel Filler Neck, Tank Recess |
| Factory Description | Filler Neck Tank Recess |
| Diagram Reference | Position 130, side wall and tank recess group |
| Fitted Position | Body side, at the fuel tank recess behind the filler flap |
| Condition | New, Genuine OEM |
| Category | Body & Exterior Parts |
Installation Position & Fitment Notes
The filler neck sits in the rear body side at the tank recess, linking the filler flap aperture to the fuel tank. Replacement is bodywork-level work: access is from the filler recess and the inner body side, surrounding trim and the filler flap assembly must be handled with care, and all joints must seat fully so the cap seals correctly afterwards. Because the component carries fuel and fuel vapour, sealing faces and hose connections must be clean, undamaged, and correctly tightened. Confirm fitment by VIN before ordering, as SLR production splits and special editions can change surrounding parts.
On an ageing SLR, inspect the rubber hoses and seals that join the neck to the tank while access is open, because perished rubber in the same area is a common source of fuel smells that owners wrongly blame on the cap. Renewing tired joining hoses at the same time is far cheaper than opening the body side twice.
Product Brand, Type & Condition
Brand: Mercedes-Benz. Type: fuel filler neck pipe for the tank recess. Condition: brand-new genuine OEM part, supplied exactly as the factory produces it, with no repair, repaint, or refurbishment.
What’s Included in the Box
This listing includes one (1) Genuine Mercedes-Benz Fuel Filler Neck, OE part number A1996390042. The filler cap, filler flap, and the separate filler neck bracket A1996300036 are different part numbers and are not included unless stated. Check your existing hardware before ordering so any perished seals or clips can be replaced at the same time.
Installation Requirements
Professional installation by a qualified technician with fuel system experience is essential. Work must be carried out away from ignition sources, with the fuel system depressurised and vented as Mercedes-Benz procedure requires, and the battery disconnected where specified. After fitting, the filler area should be leak-checked and the cap seal tested before the car returns to service. Handle the SLR carbon body panels and surrounding trim with particular care during access.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Ready to restore your SLR McLaren filler neck? Order the Genuine Mercedes-Benz Fuel Filler Neck A1996390042 from European Autospares Trading LLC, with fast delivery across the UAE. Not sure it fits? Contact us with your VIN and our parts team will confirm before you buy. Browse all genuine Mercedes-Benz spare parts, our body and exterior parts, and engine parts for more genuine components.
Passformdetails
xMERCEDES-BENZ SLR MCLAREN FUEL FILLER NECK FITMENT GUIDE
| Model | Model Year Range | Engine |
|---|---|---|
| Mercedes-Benz SLR McLaren (C199 / R199) | 2003-2007 | 5.4L V8 Supercharged (M155) |
Technician's Advisory: This filler neck is a body-side fuel system component. Work away from ignition sources, relieve and vent the fuel system following Mercedes-Benz procedure, and leak-check the filler recess and cap seal after fitting. The SLR uses carbon fibre body panels, so take particular care with surrounding trim and the filler flap assembly during access.
Important: This genuine Mercedes-Benz part is listed by OE part number A1996390042. The catalogue diagram group is listed for 2003 to 2007 SLR McLaren cars, and the SLR was produced from 2003 to 2010 in Coupe, Roadster, 722, and Stirling Moss forms. Exact compatibility depends on variant and production date. Send your complete VIN to the European Autospares parts team and we will verify this is the correct part for your vehicle.
Häufig gestellte Fragen
xFrequently Asked Questions
Yes. A1996390042 is a genuine Mercedes-Benz OE part, the original filler neck for the tank recess on the SLR McLaren, made to the factory specification for the 199 chassis. It is not an aftermarket copy. The neck matches the factory recess profile, nozzle angle, and sealing faces exactly, so the filler cap seals correctly and refuelling stays clean and safe.
Check the part number first: this neck is listed for the Mercedes-Benz SLR McLaren, catalogue years 2003 to 2007 for this diagram group, and later variants need individual checking. Send your complete VIN to our parts team and we will verify A1996390042 against the factory catalogue for your exact car before you order, including Roadster and 722 edition cars.
Look for a fuel smell around the filler flap after refuelling, fuel weeping or staining at the recess, a filler cap that no longer seals, slow or splash-back filling at the pump, or visible corrosion and impact damage to the neck. These faults can let vapour escape and water enter the tank, so inspect the neck promptly.
No. This listing is for one genuine filler neck, part number A1996390042, only. The filler cap, the filler flap, and the separate filler neck bracket listed as A1996300036 are different part numbers and are not included. If your bracket, seals, or hardware are corroded or damaged, tell our team and we can quote those items alongside the neck.
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it. We recommend VIN verification before ordering, so contact us with your VIN if you are unsure about fitment for your SLR.
Günstiger gefunden?
xVersand & Rückgabe
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Eine Auswahl führt zu einem vollständigen Neuladen der Seite.
