Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Hersteller: European Autospares Trading LLC
Genuine Porsche Engine Idle Speed Control Valve 92860616102
Dhs. 4,610.00
Hersteller: European Autospares Trading LLC
Genuine Porsche Engine Idle Speed Control Valve 92860616102
Dhs. 4,610.00
Beschreibung
xGenuine Porsche Engine Idle Speed Control Valve 92860616102 - Classic 928 Idle Control
A stable idle is the signature of a healthy classic engine. The Genuine Porsche Engine Idle Speed Control Valve 92860616102 meters the air bypassing the throttle plate at idle, holding steady revs across cold starts, warm running, and electrical load changes. When the original valve wears out after decades of service, idle turns erratic — and this genuine Porsche part restores factory idle behaviour. Available to order from European Auto Spares at AED 4610.00.
What the Idle Speed Control Valve Does in Your Engine
At idle, the throttle plate is closed, so the engine needs a precisely controlled alternative air path to keep running. The idle speed control valve — also known as the idle air control valve — is a small electromechanical device on that bypass circuit. The engine management (DME on classic 928 systems) commands the valve to open or close, trimming bypass airflow to hold the target idle speed: more for a cold engine, adjusting for air-conditioning load, and closing down as it warms. The genuine 92860616102 responds with the flow characteristics the DME calibration expects, so idle stays smooth and the engine pulls away cleanly.
Symptoms of a Failing Idle Speed Control Valve
The classic sign is an unstable idle — revs that hunt up and down, sag when the air conditioning engages, or drop so low the engine threatens to stall at traffic lights. Cold starts may need throttle assistance, and the engine can die when you lift off approaching a junction. These symptoms creep in gradually as the valve wears and its passages foul with deposits. Before replacing, have a technician confirm the fault: vacuum leaks, throttle-body fouling, and tired sensors can mimic a bad valve, and an idle valve is too valuable a part to replace on guesswork.
The Genuine Advantage for Classic Porsche Engine Management
Idle control is a closed-loop calibration: the DME expects a specific airflow response for every command it sends the valve. The genuine Porsche 92860616102 is the part that calibration was written around, so its flow curve, response time, and electrical behaviour match the management system exactly. Aftermarket replacements frequently get one of these wrong — a slightly different flow characteristic makes the idle hunt, and mismatched electrical behaviour can shorten the valve's life. On a classic 928, the genuine valve is both the technically correct repair and the decision that preserves the car's originality.
Installation Notes for Your Workshop
This is a job for a technician familiar with the 928. The valve sits in the intake bypass circuit; the intake hoses and electrical connector are disconnected, and the mounting area checked for hardened or cracked rubber hoses that would cause vacuum leaks. Before fitting the new genuine valve, the bypass passages should be inspected and cleaned so deposits do not choke the new unit from day one. After installation, run the engine through its cold-to-warm cycle so the DME relearns idle trim. Send us your VIN before ordering so we confirm the 92860616102 suits your car's management variant.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Porsche |
| OE Part Number | 92860616102 |
| Part Type | Engine idle speed control valve (idle air control valve) |
| System | Idle air bypass circuit, engine management (DME) controlled |
| Application | Classic Porsche 928 engine management systems |
| Function | Meters bypass airflow to regulate engine idle speed |
| Condition | New, in factory packaging |
| Authenticity | Genuine Porsche original equipment part |
| Price | AED 4610.00 |
| Availability | Available to order from European Auto Spares |
Genuine vs Aftermarket: Idle Speed Control Valve Comparison
| Feature | Genuine 92860616102 | Generic / Aftermarket Idle Valve |
|---|---|---|
| OE reference | Stamped Porsche OE number 92860616102 — exact application traceable | Often sold as "fits 928" with no verifiable OE cross-reference |
| DME calibration match | Flow response matches the calibration the engine management expects | Flow differences can cause hunting, sagging, or high idle |
| Electrical behaviour | OEM-spec windings and response matched to DME drivers | Mismatched characteristics can shorten life or confuse the DME |
| Long-term durability | Built to survive decades of heat cycling in the engine bay | Often fails early under the same conditions |
| Fitment assurance | Physical ports and connector match the 928 bypass circuit exactly | May need adaptation of hoses or wiring |
| Vehicle value | Preserves originality on a collectible classic | Non-original parts can concern future buyers |
| Support | VIN-verified by our team before dispatch | Fitment responsibility left entirely to the buyer |
Verification note: OE reference 92860616102 and product data cross-checked against the live European Auto Spares product listing (europeanautospares.com, "Genuine Porsche Engine Idle Speed Control Valve 92860616102") on 2026-10-12. Electrical specifications (operating voltage, coil resistance, connector pinout) are factory-internal data and are not published; we have flagged these to the parts team rather than estimating.
Why Choose European Auto Spares for This Porsche Idle Valve
Genuine Classic Porsche Sourcing
Classic 928 parts are getting harder to find, and the market is full of valves that merely claim to fit. We supply the genuine Porsche 92860616102 with its correct OE reference.
VIN Verification Before Dispatch
The 928 ran through several engine management variants. Send us your full VIN and we will confirm the 92860616102 matches your car's DME system, so you never buy a valve calibrated for a different variant.
Idle-System Diagnostics Mindset
A bad idle is not always the valve — vacuum leaks, tired sensors, and fouled throttle bodies cause identical symptoms. Ask our team when you order.
UAE-Based, AED Pricing
Priced at AED 4610.00 with local ordering and support in Dubai — a UAE specialist that confirms fitment and answers for the result.
Honest Spec Policy
We never invent electrical specifications, flow figures, or response data where the factory does not publish them. If a specification is not verifiable, we say so plainly.
Not Sure It Fits Your 928? Send Your VIN
The 928 used several engine management variants, and the idle valve must match your car's DME calibration. Send us your complete VIN before ordering and we will verify the genuine 92860616102 valve is correct for your car.
Complete the Job
An idle repair often involves the wider air-and-ignition path. Check the Bentley air mass meter range if intake metering needs attention, refresh with a genuine Porsche spark plug set, and inspect the Bentley ignition coil if misfires accompany the idle problem. Browse our full Engine Parts collection.
The Genuine Porsche Engine Idle Speed Control Valve 92860616102 restores the steady idle your 928 was engineered to have — order it from European Auto Spares and let your classic run the way Porsche intended.
Passformdetails
xPorsche Engine Idle Speed Control Valve Fitment
| Application | Fitment Detail |
|---|---|
| Porsche 928 (classic engine management) | Idle air bypass circuit — OE valve 92860616102 |
| DME / idle stabilizer systems | Valve must match your car's engine management variant — confirm by VIN |
| Idle-speed repair & restoration | Inspect bypass hoses and passages for fouling before fitting the new valve |
| Fitment confirmation | Send your full VIN — our team verifies the DME variant before dispatch |
Technician's Advisory: The 928 used several engine management variants across its production life — never order by model name alone. Always confirm exact fitment with your VIN before ordering. Before fitting, rule out vacuum leaks, throttle-body fouling, and sensor faults that can mimic a failed idle valve, and inspect the bypass hoses for cracks that would cause leaks after the repair.
Häufig gestellte Fragen
xFrequently Asked Questions
The 92860616102 is a genuine Porsche idle speed control valve for the classic 928. It meters the air bypassing the closed throttle plate at idle, letting the engine management hold a steady idle during cold starts, warm running, and electrical load changes. When it wears out, idle turns erratic — replacing it restores the factory behaviour the DME expects.
Watch for an unstable idle: revs hunting up and down, sagging or stalling at lights, needing throttle to start cold, or idle stuck too high when warm. These appear gradually as the valve wears and passages foul. A technician should confirm the fault first — vacuum leaks and tired sensors can mimic a failed valve on the 928.
The 92860616102 is the genuine Porsche valve specified for classic 928 engine management systems. But the 928 ran through several DME variants, and the valve must match your car's calibration. Send us your complete VIN before ordering and we will confirm the valve suits your car.
Aftermarket idle valves often differ in flow characteristics or electrical behaviour from the part the DME calibration was written around. Even small differences can make the idle hunt or sit too high — and may shorten the valve's life. The genuine Porsche 92860616102 matches the management system exactly and preserves originality on a collectible classic.
This is a brand-new genuine Porsche part in factory packaging, covered against manufacturing defects under the standard genuine parts warranty, and your statutory consumer rights apply in the UAE. If the valve arrives damaged or incorrect due to our error, we replace or refund it. We verify your VIN before dispatch, since the valve must match your DME variant.
Günstiger gefunden?
xVersand & Rückgabe
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Eine Auswahl führt zu einem vollständigen Neuladen der Seite.
