Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Hersteller: European Autospares Trading LLC
Genuine Porsche Suspension Spring Strut Assembly 97034124301A
Dhs. 98.00
Hersteller: European Autospares Trading LLC
Genuine Porsche Suspension Spring Strut Assembly 97034124301A
Dhs. 98.00
Beschreibung
xProduct Overview
The Genuine Porsche Front Control Arm Rubber Mounting 97034124301A is the original equipment rubber mounting for the front suspension of the Porsche Panamera 970. It cushions the connection between the control arm and the body, absorbing road shocks and vibration while keeping the wheel located precisely. When this mounting hardens or splits with age, the result is knocking over bumps, harshness through the car and less precise steering.
Part Numbers & Reference Codes
OE part number: 97034124301A (base number 970 341 243 01, also written 97034124301). It belongs to the Panamera 970 front axle mounting family alongside 97034124101 and 97034124502, but each number fits its own mounting position and they are not interchangeable. Match the OE number exactly before ordering.
Vehicle Compatibility & Fitment
This rubber mounting fits the Porsche Panamera 970 from 2010 onwards, on the front axle, as listed in the Fitment Details tab. Always confirm the mounting position against your VIN before ordering, since the Panamera front suspension uses several rubber mountings that look similar but fit different points.
Key Features & Benefits
- Genuine OE mounting: the exact rubber mounting specified by Porsche for the Panamera 970 front axle.
- Vibration isolation: absorbs road shocks and damps vibration before it reaches the body.
- Precise wheel location: holds the control arm steady so steering stays accurate and tyres wear evenly.
- Direct-fit replacement: made to the original dimensions, so it fits without modification.
Technical Specifications
| OE Part Number | 97034124301A |
| Brand | Porsche (Genuine) |
| Product Type | Front control arm rubber mounting |
| Application | Panamera 970, 2010 onwards |
| Position | Front axle, control arm mounting |
| Material | Rubber with metal sleeve |
| Condition | New |
| Category | Suspension & Steering |
Installation Position & Fitment Notes
The mounting fits on the front axle at a control arm mounting point on the Panamera 970. It is a press-fit rubber mounting, so the old part must be pressed out and the new one seated squarely. Inspect the control arm, ball joint and neighbouring bushes while the suspension is apart.
Product Brand, Type & Condition
Brand: Porsche, genuine original equipment. Type: front control arm rubber mounting for the Panamera 970. Condition: brand new, sold individually.
What's Included in the Box
This listing includes one (1) Genuine Porsche Front Control Arm Rubber Mounting, OE part number 97034124301A. Confirm the mounting position and quantity for your repair with your VIN before ordering.
Installation Requirements
Fitting is a workshop job: remove the control arm, press out the worn mounting, press in the new mounting squarely, refit the arm with the specified fasteners, and carry out a wheel alignment afterwards. Road test to confirm the knocking and harshness have gone.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Ready to order? Order the Genuine Porsche Front Control Arm Rubber Mounting 97034124301A from European Autospares Trading LLC, stocked in Dubai with fast delivery across the UAE and worldwide shipping. Not sure it fits? Contact us with your VIN and our parts team will confirm before you buy. Browse Porsche spare parts, our Suspension & Steering Parts catalogue.
Passformdetails
xPORSCHE FITMENT GUIDE
| Model | Model Year Range | Engine |
|---|---|---|
| Porsche Panamera (970) | 2010 – 2016 | Front control arm rubber mounting |
Technician's Advisory: Press the mounting in squarely and never hammer it, since a distorted rubber mounting wears quickly and changes wheel geometry. Inspect the neighbouring bushes while the arm is off, and always carry out a wheel alignment after control arm work.
Important: This genuine part is listed by OE part number 97034124301A. Exact compatibility depends on the model, engine code and production date. Send your complete VIN to the European Autospares parts team and we will verify this is the correct front control arm rubber mounting for your vehicle.
Häufig gestellte Fragen
xFrequently Asked Questions
It is a rubber mounting for the front suspension of the Porsche Panamera 970, cushioning the control arm mounting point. It absorbs road shocks and vibration while holding the wheel precisely in place. A worn mounting causes knocking, harshness and less accurate steering on rough roads.
No, it is a rubber mounting, not a spring strut assembly. It is one mounting within the Panamera 970 front suspension, and it is ordered by its OE number for a specific mounting position. If you need a complete strut, contact the parts team with your VIN so the correct assembly can be identified.
Common signs are knocking or clunking over bumps, extra harshness and vibration through the car, and steering that feels less precise. Rubber mountings harden and split with age and heat, so a visual inspection on a ramp usually confirms cracking or movement before replacement.
No, each OE number in the Panamera 970 front axle family fits its own mounting position, and they are not interchangeable. Always match the OE number exactly, or confirm the position with your VIN, to avoid ordering a bush that fits a different point on the same axle.
Yes, have the wheel alignment checked after any control arm mounting replacement. Removing and refitting the arm changes suspension geometry, and incorrect alignment wears tyres quickly and dulls handling. A workshop alignment restores the factory settings once the repair is complete.
Günstiger gefunden?
xVersand & Rückgabe
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Eine Auswahl führt zu einem vollständigen Neuladen der Seite.
