Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Bentley Brake System Hydraulic Connector Union 3W0616335
Dhs. 125.00
Vendor: European Autospares Trading LLC
Genuine Bentley Brake System Hydraulic Connector Union 3W0616335
Dhs. 125.00
Description
xGenuine Bentley Brake Hydraulic Connector Union 3W0616335 – OE Brake Fitting
Your brakes work on hydraulic pressure — and pressure demands perfect seals. This genuine Bentley brake system hydraulic connector union (OE part number 3W0616335) joins sections of brake line with OE-precision threads and sealing seats, keeping the hydraulic circuit leak-free under hard braking. A compromised union means a compromised pedal. Supplied new in genuine Bentley packaging, with VIN-verified fitment and fast delivery across the UAE from European Auto Spares.
What a Brake Hydraulic Union Does
A hydraulic union is the joint where two sections of brake line meet. Every time you press the brake pedal, the master cylinder sends pressurised fluid through these lines to the calipers — and each union in that path must hold full system pressure without weeping a drop. The genuine Bentley 3W0616335 connector union is machined to the original thread and seat specification, so it mates perfectly with the adjoining brake pipes and seals the circuit exactly as the factory intended. It is a small fitting with a safety-critical job: transmitting your braking force, every stop, without fail.
Warning Signs of a Failing Brake Union
Brake hydraulic fittings usually deteriorate through corrosion or disturbed sealing seats after line work. Watch for a visible fluid weep or dampness at a line joint, a brake pedal that feels soft or spongy, a slowly dropping brake fluid level, or the brake warning light on the dashboard. Corrosion or green/white deposits on the fitting itself are a red flag in the UAE's humidity. Any of these symptoms means the hydraulic circuit is compromised — braking performance and safety are at stake, so a suspect union should be replaced immediately with the genuine 3W0616335, followed by a full system bleed.
Why OE Spec Is Non-Negotiable for Brake Hydraulics
Brake hydraulics operate at extreme pressure, and there is no margin for approximation. The genuine Bentley union is manufactured to the exact OE thread profile and sealing-seat geometry, so it seals first time without over-tightening — the most common cause of cracked seats and stripped threads with pattern fittings. The OE-spec metal and surface treatment resist the corrosion that attacks brake fittings over years of heat, moisture and road salt exposure. Full traceability through Bentley's OE part numbering means your workshop knows exactly what is in the brake circuit. On safety-critical brake parts, genuine Bentley parts are the only acceptable choice.
Fitting Notes for the 3W0616335 Union
Brake hydraulic work must be carried out by a qualified technician — this is not a DIY task. The system must be safely depressurised before the old union is disturbed, and the adjoining brake pipes inspected for corrosion or flare damage; a new union cannot seal against a damaged pipe end. Fit the genuine union to the specified torque — never over-tighten — then bleed the entire brake circuit and confirm a firm pedal before road testing. Use only the brake fluid grade specified for your Bentley, and re-inspect the joint for weeping after the first drive.
Specifications
| Brand | Bentley (Genuine OEM) |
|---|---|
| OE Part Number | 3W0616335 |
| Part Type | Brake system hydraulic connector union |
| Material | OEM-spec metal fitting (Bentley OE specification) |
| Function | Joins brake hydraulic line sections in the braking circuit |
| Sealing | OE-spec thread profile and sealing seat geometry |
| Application | Brake hydraulic circuit — exact location confirmed via VIN |
| Condition | New — genuine Bentley part |
| Supplied As | Single union fitting |
| Fitment | Bentley — confirm exact model with your VIN |
| Warranty | Genuine parts warranty; UAE consumer rights apply |
Genuine Bentley vs Aftermarket Brake Unions
| Feature | Genuine 3W0616335 | Generic / Aftermarket |
|---|---|---|
| Thread precision | Machined to exact OE thread profile | Varies — cross-threading and poor seal risk |
| Sealing seat geometry | OE seat seals first time at correct torque | May need over-tightening, cracking the seat |
| Pressure integrity | Validated for full braking system pressure | Unverified — weep or burst risk under hard braking |
| Corrosion resistance | OE-spec material and surface treatment | Often corrodes early in heat and humidity |
| Material specification | Bentley OE metallurgy | Unknown alloy, unknown fatigue life |
| Traceability | Genuine Bentley OE part number and packaging | Origin often unverifiable |
Verification note: Genuine Bentley parts are identified by official OE part numbering and Bentley packaging. Fitment confirmed against Bentley OE parts data — checked October 2026. Brake hydraulic components should always be fitted by a qualified technician.
Why Choose European Auto Spares
Safety-Critical Parts, Genuine Only
We never compromise on brake components. The 3W0616335 we supply is the genuine Bentley hydraulic union in official packaging — the exact fitting your braking system was engineered around, with the pressure integrity your safety depends on.
VIN-Verified Fitment Before Dispatch
Brake line fittings are application-specific. Send us your VIN and our parts team confirms the 3W0616335 is the correct union for your Bentley's hydraulic circuit before your order leaves — no wrong parts on safety systems.
Dubai-Based, Fast UAE Delivery
Brake repairs cannot wait weeks for overseas parts. Order genuine Bentley parts online from our UAE stock and get the union dispatched quickly to Dubai, Abu Dhabi, Sharjah and across the Emirates.
Trusted by Brake Specialists
Workshops across the UAE source their Bentley brake hydraulics from us because the parts are genuine, the fitment is verified, and the car goes back on the road with a firm pedal and full confidence.
Warranty and After-Sales Support
Every genuine part is covered by our warranty terms, and UAE consumer protection applies. If anything is not as described, contact us with your order number and VIN for a fast resolution.
Unsure where this union sits in your brake circuit? Send us your complete VIN before ordering and our parts team will confirm the exact application of the 3W0616335 on your Bentley — free of charge. Correct first-time fitment is how we keep workshops and owners coming back.
Complete the Job
Brake hydraulic work is the ideal time to assess the whole braking system. Browse our Brake Parts collection for related service components, and see our Audi & VW brake pads range for friction parts across the VAG family. Since technicians routinely inspect the front suspension during brake service, the Genuine Lamborghini Front Right Lower Suspension Control Arm 470505312F is worth a look for workshops handling multi-brand European cars.
Never gamble with brake hydraulics. Order the genuine Bentley brake hydraulic connector union 3W0616335 today from European Auto Spares — genuine Bentley spare parts, VIN-verified fitment, and delivery across the UAE.
Fitment Details
xBENTLEY CONNECTOR FITMENT GUIDE
| Model | Application | Year Range |
|---|---|---|
| Bentley Continental Supersports | Air supply unit connector union, 4 mm air line | 2017–2018 |
Technician's Advisory: Inspect the mating line ends for corrosion or damage before joining — a union can only seal on a clean, undamaged flare or line end. Pressure-test the circuit after fitting.
Important: This genuine Bentley part is listed by OE part number 3W0616335. Exact compatibility depends on the model, variant, production date and equipment level. Send your complete VIN to the European Autospares parts team and we will verify this is the correct part for your vehicle.
FAQs
xFrequently Asked Questions
It is the genuine Bentley hydraulic connector union that joins two sections of brake line. It maintains a leak-free, high-pressure seal in the braking circuit so pedal force reaches the calipers fully. Any weep at this joint means the circuit is compromised and the union should be replaced immediately.
Watch for fluid weeping at a line joint, a soft or spongy brake pedal, a dropping brake fluid level, the brake warning light, or visible corrosion on the fitting. These are safety-critical symptoms — have the car inspected at once and replace the union with the genuine 3W0616335, followed by a full system bleed.
The 3W0616335 suits Bentley models using 3W0-series brake hydraulic components, including the Continental family. Because the exact position varies by model and year, send us your complete VIN before ordering and our parts team will verify fitment free of charge.
We strongly advise against it. The genuine union is machined to the exact OE thread and seat specification and validated for full system pressure. Pattern fittings can cross-thread, crack their seats when tightened, or weep under hard braking — unacceptable risks in a safety-critical circuit.
This genuine Bentley union is covered by our genuine-parts warranty against manufacturing defects. Under UAE consumer protection law you are entitled to a remedy if a product is defective or not as described. Keep your invoice, and contact us with your VIN and order number for a fast resolution.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
