Genuine Bentley Engine Cooling Hose Pipe 3Y0422887C

Product Overview

The Genuine Bentley Power Steering Hose Pipe 3Y0422887C is the original steering hydraulic hose for the second generation Bentley Continental range. In the Bentley and Volkswagen Group factory numbering system, the 422 887 number group identifies the power steering intake hose, the moulded suction hose that carries hydraulic fluid from the steering fluid reservoir to the hydraulic pump. It is shaped to the exact routing of the original installation, with the correct bends, end fittings, and connection geometry, so the pump draws a steady, air-free supply of fluid and the steering assistance stays smooth and quiet at every speed.

Although this listing was first created under a cooling hose title, the factory part number itself identifies a steering hose, not an engine coolant hose. Order and verify by the part number 3Y0422887C, and read the fitment notes below before ordering.

Part Numbers & Reference Codes

OE part number: 3Y0422887C (also written 3Y0 422 887 C). The 3Y0 prefix is used on the second generation Continental platform, and the same 422 887 hose position is documented on the earlier Continental generation under the 3W0 422 887 family. Always order and verify by this Bentley part number to ensure you receive the correct original steering hose for your car.

Vehicle Compatibility & Fitment

This hose belongs to the second generation Bentley Continental GT and Continental GTC, the model range built from 2012 to 2018 with the 6.0 litre W12 and 4.0 litre V8 engines. Steering hose routing and end fittings vary with engine, model year, and steering specification, so this genuine Bentley OE hose should always be confirmed against your exact vehicle. Share your VIN with our parts team before ordering and we will verify fitment against the factory catalogue for your car.

The second generation Continental was built in GT coupe and GTC convertible form, and the range includes the GT Speed and Supersports derivatives of the same platform. All use the hydraulic steering system this hose serves. The earlier 2003 to 2011 Continental generation uses the related 3W0-prefixed version of this hose position, which is a different part and is not interchangeable with the 3Y0 number listed here, so do not order by model name alone. If your car is a Flying Spur or a Mulsanne, or if the number on your old hose differs in any digit or suffix, contact us with the VIN before ordering so we can identify the correct hose from the factory catalogue rather than guessing.

Key Features & Benefits

• Correct factory function: the 422 887 hose is the power steering intake hose between the fluid reservoir and the hydraulic pump, made to the original Bentley specification.
• Exact moulded shape: formed to the OE routing, so it clears the surrounding engine bay components and connects without strain or kinking.
• Steady pump supply: the correct internal bore keeps fluid flowing freely to the pump, protecting it from cavitation, noise, and premature wear.
• OE fluid compatibility: hose material specified for Bentley power steering hydraulic fluid, heat, and engine bay conditions.
• Restores steering feel: a sound suction hose ends the whine, judder, and heavy low-speed steering that follow a collapsing or leaking intake hose.

Technical Specifications

Installation Position & Fitment Notes

This hose installs in the engine bay between the power steering fluid reservoir and the hydraulic pump, following the original factory routing. Before fitting, drain or contain the steering fluid, release the end connections, and remove the old hose without bending the reservoir or pump stubs. Seat the new hose fully on both connections, secure it exactly as the original was secured, refill the system with the Bentley-specified hydraulic fluid, and bleed the steering by turning the wheel lock to lock with the engine running until the fluid is clear and air-free. Check for leaks at both ends after the first drive.

Product Brand, Type & Condition

Brand: Bentley. Type: power steering hose pipe (intake hose). Condition: brand-new genuine OEM part, supplied exactly as the factory produces it. This is an original Bentley component, not an aftermarket copy, and it is a steering hydraulic hose, not an engine cooling hose.

What’s Included in the Box

This listing includes one (1) Genuine Bentley Power Steering Hose Pipe, OE part number 3Y0422887C. Sealing washers, clamps, and hydraulic fluid are not included unless listed separately, and any seal disturbed during fitting should be renewed.

Installation Requirements

Professional installation by a qualified technician is recommended. The steering system must be refilled with the correct Bentley hydraulic fluid and fully bled after fitting; air left in the system causes noise, heavy steering, and pump damage. Inspect the reservoir, pump, and the remaining steering hoses while the system is open, and replace any hose that is soft, cracked, or weeping.

Warranty & Returns

This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.

Confirm Fitment & Order

Ready to restore your Continental’s steering? Order the Genuine Bentley Power Steering Hose Pipe 3Y0422887C from European Autospares Trading LLC, with fast delivery across the UAE. Not sure it fits? Contact us with your VIN and our parts team will confirm before you buy. Browse all genuine Bentley spare parts or our suspension and steering parts for the matching components.