Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Bentley Hex Nut Fastener Shouldered N10011501
Dhs. 13.00
Vendor: European Autospares Trading LLC
Genuine Bentley Hex Nut Fastener Shouldered N10011501
Dhs. 13.00
Description
xProduct Overview
The Genuine Bentley Hex Nut Fastener Shouldered N10011501 is the original hexagon collar nut for your Bentley, confirmed by Eurospares and Flying Spares as a genuine Bentley HEXAGON COLLAR NUT. A collar nut carries an integrated shoulder, or collar, at its base that acts like a built-in washer face: it spreads the clamping load over a wider area, protects the surface underneath and helps the nut seat squarely and hold its torque. This part carries an N-prefix number, the Volkswagen Group standard parts numbering used across Bentley models for common hardware. Eurospares notes this exact number is not shown in its public catalogue diagrams, so no model list is published for it here and fitment for this listing is confirmed by VIN only. Please send your VIN before ordering so our parts team can verify N10011501 against your exact car.
Part Numbers & Reference Codes
OE part number: N10011501, also written N 100 115 01 in Volkswagen Group standard parts format. Factory name: hexagon collar nut, the shouldered hex nut described in the title. Always order and verify by this full Bentley part number together with your VIN. Collar nuts differ by thread size, pitch and collar diameter between applications, and a nut with the wrong thread must never be forced, so similar-looking nuts from other applications must not be substituted on appearance alone.
Vehicle Compatibility & Fitment
This collar nut is a standard fastener used at the specific joint the factory assigns it to on the car it was specified for. Because the public catalogue sources consulted do not list a model application for N10011501, we do not publish a model table for it: the Fitment Details tab carries VIN-verification wording instead of invented applications. Bentley hardware differs by model, assembly and production split, so send your complete VIN to our parts team and we will verify this nut against the factory data for your car before you buy. If your workshop has already removed the old nut, its thread size and pitch are a useful second check alongside the VIN.
Key Features & Benefits
- Genuine Bentley collar nut: the original hexagon collar nut, made to the factory specification for the joint it serves.
- Integrated shoulder: the collar face spreads clamping load like a built-in washer, protecting the clamped surface.
- Seats squarely: the shouldered base helps the nut sit true on the joint, supporting correct torque and clamp load.
- Identified by full number: N-prefix standard hardware is matched by its complete part number, not by appearance.
- VIN-verified supply: because no public catalogue model listing could be checked for this number, every order is verified against your VIN before dispatch.
Technical Specifications
| OE Part Number | N10011501 |
| Brand | Bentley |
| Product Type | Hexagon Collar Nut, Shouldered Hex Nut |
| Factory Name | Hexagon Collar Nut |
| Part Number Format | N-prefix Volkswagen Group standard part |
| Fitment Basis | Confirm by VIN before ordering, no catalogue model list verified |
| Condition | New, Genuine OEM |
| Category | Body & Exterior Parts |
Installation Position & Fitment Notes
This collar nut installs on its mating stud or bolt at the joint the factory assigns it to, with the collar face against the clamped component. Threads must be clean and undamaged, the nut must start by hand without force so it cannot cross-thread, and it must be tightened to the Bentley specification for that joint. Nuts that are corroded, stretched or have damaged threads or a marked collar face should not be reused, because they cannot be relied on to hold clamp load. Fitment should be confirmed by VIN before ordering, and the nut removed from the car should be compared with the new one before fitting.
Product Brand, Type & Condition
Brand: Bentley. Type: hexagon collar nut, a shouldered hex nut and Volkswagen Group standard fastener. Condition: brand-new genuine OEM part, supplied exactly as the factory produces it. The mating bolt or stud is a separate part and is not part of this listing.
What’s Included in the Box
This listing includes one (1) Genuine Bentley Hexagon Collar Nut, OE part number N10011501. If the joint you are repairing uses several of these nuts, or the same nut appears at more than one position, order the quantity your workshop has specified for the job.
Installation Requirements
Professional installation by a qualified technician is recommended. The mating thread must be inspected and cleaned, the nut started by hand to rule out cross-threading, and final tightening carried out to the Bentley specification for the assembly being repaired so the collar seats flat and the joint holds its clamp load.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Ready to refit your Bentley with the correct factory collar nut? Order the Genuine Bentley Hex Nut Fastener Shouldered N10011501 from European Autospares Trading LLC, with fast delivery across the UAE. Fitment for this part is VIN-verified, so Contact us with your VIN first and our parts team will confirm before you buy. Browse all genuine Bentley spare parts and our body and exterior parts.
Fitment Details
xBENTLEY HEXAGON COLLAR NUT FITMENT GUIDE
| Model | Model Year Range | Engine |
|---|---|---|
| Bentley models originally fitted with this part number | Application-dependent, confirm by VIN before ordering | Application-dependent, confirm by VIN before ordering |
Technician's Advisory: Never force a collar nut onto a thread it does not start on easily by hand. Match the full OE number, compare the thread and collar against the nut removed from the car, start the new nut by hand to rule out cross-threading, and tighten to the factory specification for the joint.
Important: This genuine Bentley part is listed by OE part number N10011501, factory name hexagon collar nut. The public catalogues consulted do not publish a model application for this exact number, so exact compatibility must be confirmed by VIN. Send your complete VIN to the European Autospares parts team and we will verify this is the correct part for your vehicle.
FAQs
xFrequently Asked Questions
Yes. The N10011501 is a genuine Bentley OE hexagon collar nut, confirmed by Eurospares and Flying Spares under that exact factory name. It is a Volkswagen Group standard fastener, supplied brand-new exactly as the factory produces it for the joint it serves on your Bentley.
Collar nuts are joint-specific, and the public catalogues consulted do not publish a model list for this exact number. Send your complete VIN to our parts team before ordering and we will verify N10011501 against the factory data for your exact car before you buy.
The collar is an integrated flange at the base of the nut that works like a built-in washer face. It spreads the clamping load over a wider area, protects the surface underneath from marking, and helps the nut seat squarely so the joint holds its torque correctly.
This is a brand-new genuine Bentley part, supplied exactly as the factory produces it and never previously fitted. New OE hardware has clean, undamaged threads and an unmarked collar face, so it tightens smoothly and holds clamp load as the factory intended from the first fitting.
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it. We recommend VIN verification before ordering if you are unsure about fitment.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
