Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Bentley Automotive Washer Fastener N91062801
Dhs. 13.00
Vendor: European Autospares Trading LLC
Genuine Bentley Automotive Washer Fastener N91062801
Dhs. 13.00
Description
xProduct Overview
The Genuine Bentley Automotive Washer Fastener N91062801 is the original washer for your Bentley, supplied to the factory specification for the joint it serves. A washer spreads the clamping load of a bolt or nut over a wider area, protects the surface underneath from marking and damage, and helps the fastener hold its torque. This part carries an N-prefix number, the Volkswagen Group standard parts numbering used across Bentley models for common hardware, so the exact washer is identified by its full number rather than by appearance. We could not find a public factory catalogue listing for the exact number N91062801 in the sources available to us, so this page is written to the part identity in the title, a genuine Bentley washer, and fitment for this listing is confirmed by VIN only. Please send your VIN before ordering so our parts team can verify N91062801 against your exact car.
Part Numbers & Reference Codes
OE part number: N91062801, also written N 910 628 01 in Volkswagen Group standard parts format. Always order and verify by this full Bentley part number together with your VIN. Standard washers look alike across a wide range of sizes and thicknesses, and a washer with the wrong inside diameter, outside diameter or thickness can allow a joint to loosen or mark a finished surface, so similar-looking washers from other applications must not be substituted on appearance alone.
Vehicle Compatibility & Fitment
This washer is a general fastener used at the specific joint the factory catalogue assigns it to on the car it was specified for. Because we could not verify a model list for N91062801 from a factory catalogue source, we do not publish a model table for it: the Fitment Details tab carries VIN-verification wording instead of invented applications. Bentley hardware differs by model, assembly and production split, so send your complete VIN to our parts team and we will verify this washer against the factory data for your car before you buy. If your workshop has already removed the old washer, its inside diameter, outside diameter and thickness measurements are a useful second check alongside the VIN.
Key Features & Benefits
- Genuine Bentley washer: the original standard fastener, made to the factory specification for the joint it serves.
- Spreads clamping load: the washer face distributes bolt or nut pressure evenly, protecting the clamped surface.
- Helps hold torque: a correct, flat washer gives the fastener a true bearing surface so the joint stays tight.
- Identified by full number: N-prefix standard hardware is matched by its complete part number, not by appearance.
- VIN-verified supply: because this number has no public catalogue listing we could check, every order is verified against your VIN before dispatch.
Technical Specifications
| OE Part Number | N91062801 |
| Brand | Bentley |
| Product Type | Washer, Standard Fastener |
| Part Number Format | N-prefix Volkswagen Group standard part |
| Fitment Basis | Confirm by VIN before ordering, no catalogue model list verified |
| Condition | New, Genuine OEM |
| Category | Body & Exterior Parts |
Installation Position & Fitment Notes
This washer installs under the head of a bolt or under a nut at the joint the factory assigns it to, with its flat face against the clamped component. The mating surfaces must be clean and free of old sealant, corrosion and debris before fitting, and the fastener must be tightened to the Bentley specification for that joint. Washers that have been crushed, bent or heavily marked in service should not be reused, because a distorted washer cannot spread the load evenly. Fitment should be confirmed by VIN before ordering, and the washer removed from the car should be compared with the new one before the joint is closed.
Product Brand, Type & Condition
Brand: Bentley. Type: washer, a Volkswagen Group standard fastener. Condition: brand-new genuine OEM part, supplied exactly as the factory produces it. The mating bolt or nut is a separate part and is not part of this listing unless your workshop confirms it is supplied with the assembly being repaired.
What’s Included in the Box
This listing includes one (1) Genuine Bentley Automotive Washer Fastener, OE part number N91062801. If the joint you are repairing uses several washers, or the same washer appears at more than one position, order the quantity your workshop has specified for the job.
Installation Requirements
Professional installation by a qualified technician is recommended. The joint must be opened with care, the old washer and fastener inspected, mating surfaces cleaned, and the fastener tightened to the Bentley specification for the assembly being repaired so the washer seats flat and the joint holds its clamp load.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Ready to refit your Bentley with the correct factory washer? Order the Genuine Bentley Automotive Washer Fastener N91062801 from European Autospares Trading LLC, with fast delivery across the UAE. Fitment for this part is VIN-verified, so Contact us with your VIN first and our parts team will confirm before you buy. Browse all genuine Bentley spare parts and our body and exterior parts.
Fitment Details
xBENTLEY WASHER FITMENT GUIDE
| Model | Model Year Range | Engine |
|---|---|---|
| Bentley models originally fitted with this part number | Application-dependent, confirm by VIN before ordering | Application-dependent, confirm by VIN before ordering |
Technician's Advisory: Never select a standard washer by appearance alone. Match the full OE number, compare the inside diameter, outside diameter and thickness against the washer removed from the car, seat it flat on a clean surface, and tighten the fastener to the factory specification for the joint.
Important: This genuine Bentley part is listed by OE part number N91062801. No factory catalogue model listing for this exact number could be verified from the sources consulted, so exact compatibility must be confirmed by VIN. Send your complete VIN to the European Autospares parts team and we will verify this is the correct part for your vehicle.
FAQs
xFrequently Asked Questions
Yes. The N91062801 is a genuine Bentley OE washer, a Volkswagen Group standard fastener identified by its N-prefix part number. It is supplied brand-new exactly as the factory produces it, with the correct profile and thickness for the joint the factory assigns it to on your Bentley.
Standard washers are joint-specific and look alike across many sizes, and we could not verify a public catalogue model list for this exact number. Send your complete VIN to our parts team before ordering and we will verify N91062801 against the factory data for your exact car.
A washer that has been crushed, bent or marked in service no longer sits flat, so it cannot spread the clamping load evenly and the joint can loosen or damage the surface beneath. Renewing it with the genuine N91062801 restores a true bearing face for the fastener.
This is a brand-new genuine Bentley part, supplied exactly as the factory produces it and never previously fitted. New OE hardware seats flat from the first tightening and holds its clamp load as the factory intended, which a used or distorted washer cannot reliably do.
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it. We recommend VIN verification before ordering if you are unsure about fitment.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
