Genuine Ferrari Engine Mounting Stud Bolt 13449624

Genuine Ferrari Engine Mounting Stud Bolt 13449624 - OEM Engine Fastener

An engine mounting is only as secure as the fastener holding it, and on a Ferrari that fastener works harder than most. The Genuine Ferrari Engine Mounting Stud Bolt 13449624 is the factory-original stud made to Ferrari's own specification, so it threads in cleanly, clamps to the correct load, and holds the mounting — and the engine it carries — exactly where it belongs. For a part this critical, genuine is not a preference; it is the standard.

What the 13449624 Stud Bolt Does

Engine mounting studs anchor the engine's mounting points to the surrounding structure, carrying the engine's weight and absorbing the constant vibration and torque reaction of a high-performance powertrain. The 13449624 is a genuine Ferrari stud bolt manufactured to the original Ferrari drawing, with the correct thread form, shank, and material properties for its application. Because it matches the factory specification exactly, it engages the threaded bore fully, achieves the designed clamping force when torqued to the Ferrari workshop figure, and resists fatigue through years of heat cycles and vibration — the exact conditions that expose inferior fasteners.

Signs This Stud Bolt Needs Replacing

Mounting fasteners are usually replaced as a matter of course during engine or mounting work rather than on a fixed schedule, but there are clear warning signs: damaged or stretched threads, corrosion on the shank, a stud that no longer torques to specification, or any deformation found during strip-down. Excessive engine movement, new vibration through the cabin, or clunking on throttle changes can point to mounting hardware that has lost its clamping integrity. Reusing a suspect stud is a false economy — if it fails, the engine moves, and everything it can strike becomes collateral damage.

Why the Genuine Ferrari Stud Matters Here

Fasteners are one of the most counterfeited and most underestimated parts on any car. A non-genuine stud may look right yet be made from the wrong steel grade, cut with the wrong thread tolerance, or lack the correct heat treatment — any of which means it cannot hold its designed clamping load or survive the fatigue life Ferrari engineered for. The genuine Ferrari 13449624 is produced to the original specification, so the thread engages fully, the torque figure means what it should, and the mounting stays clamped. When the part holding your engine in place costs less than fifty dirhams, there is no argument for anything else.

Installation Notes

Engine mounting fasteners must be fitted by a qualified Ferrari technician. The threaded bore must be clean and undamaged, the stud installed without cross-threading, and the final torque applied to the Ferrari workshop specification using a calibrated torque wrench — never by feel. Where Ferrari specifies thread treatment or a tightening sequence, follow it exactly. This is a genuine part supplied in factory packaging; inspect the threads before fitting and do not install the stud if there is any sign of damage or deformation.

Specifications

Genuine Ferrari 13449624 vs Generic Stud Bolts

Verification note: This comparison is based on the established engineering differences between OEM and generic fasteners as documented across manufacturer technical literature and independent parts-industry guidance (checked October 2026). No performance percentages are claimed.

Why Choose European Auto Spares

Correct Thread and Grade

We supply the genuine Ferrari 13449624 — the stud made to the factory's thread form and material grade — so it engages fully and torques to specification the first time.

Clamping Force You Can Trust

An engine mounting is only as secure as its fastener. The genuine stud holds its designed clamping load through heat, vibration, and torque reaction, keeping the engine exactly where it belongs.

No Stripped Threads or Broken Studs

Inferior studs gall, stretch, or snap — usually at the worst moment. The genuine 13449624 is built to survive the fatigue life Ferrari engineered for, protecting the far more expensive components around it.

VIN-Verified Before Dispatch

Send us your Ferrari's VIN and we confirm the 13449624 is correct for your specific engine before the part leaves our Dubai facility — no wrong-part surprises on critical fasteners.

Fast UAE Supply for Critical Small Parts

Mounting hardware is often the part that holds up an engine job. We keep the supply chain short so your Ferrari does not sit waiting on a stud bolt.

Confirm fitment with your VIN: Ferrari engine mounting applications vary across models and years. Send us your complete VIN before ordering and our parts team will verify that the 13449624 is the correct stud bolt for your car. This one check eliminates the most common cause of wrong-part orders.

Complete the Job

Fastener work pairs naturally with related sealing and service items. Consider the Genuine Ferrari & Maserati Copper Sealing Washer 10280060 for joints that need fresh sealing hardware, and the Genuine Ferrari Spark Plug 192637 if the engine service is due. Browse the full Engine Parts collection for more genuine Ferrari components.

The Genuine Ferrari Engine Mounting Stud Bolt 13449624 is a small fastener with a critical job: holding your Ferrari's engine securely in place, exactly as the factory intended. Order from European Auto Spares in Dubai with VIN verification, and fit it once, fit it right.