Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Ferrari Threaded Insert Mounting Sleeve 13526070
Dhs. 13.00
Vendor: European Autospares Trading LLC
Genuine Ferrari Threaded Insert Mounting Sleeve 13526070
Dhs. 13.00
Description
xGenuine Ferrari Threaded Insert Mounting Sleeve 13526070 - Secure Body Mounting
The Genuine Ferrari Threaded Insert Mounting Sleeve 13526070 restores a solid, factory-correct mounting point wherever it is fitted. This OEM threaded insert sleeve creates a clean, durable thread where body hardware needs to anchor — in panels, brackets, and trim locations where a plain hole cannot hold a fixing. When an insert wears, spins, or is replaced with a generic sleeve, screws lose their bite, fixings loosen, and panels and trim can work free.
Mounting points on a Ferrari see constant vibration, heat cycles, and repeated removal and refitting during service. The 13526070 insert sleeve is made to the original Ferrari specification so it seats securely in its location and holds the mating fastener at the correct engagement. It is a direct replacement for the original insert fitted at the factory, with no modification needed.
Function: What the Threaded Insert Sleeve Does
A threaded insert sleeve provides a permanent, load-bearing thread inside a material or location that cannot hold one on its own. The genuine 13526070 sleeve is seated into its mounting location and the fixing screw or bolt threads into it, distributing clamping load across the sleeve's full engagement length. Because the sleeve matches the OE thread and outer profile exactly, the mating fastener draws down evenly and holds torque the way the joint was engineered to. A wrong-profile or wrong-thread sleeve cannot deliver that hold.
Failure Symptoms: When an Insert Sleeve Needs Replacing
A failing insert sleeve usually shows up as a screw that turns without tightening, a fastener that loosens again shortly after being secured, or a mounting point that feels soft or spongy when the screw is drawn down. These symptoms commonly follow repeated removal and refitting, or a previous repair where the original insert was damaged or replaced with a generic alternative. Continuing to tighten against a spinning insert damages the surrounding material, so replacing it with the genuine 13526070 is the correct fix rather than forcing the fastener.
The Genuine Ferrari Advantage
This insert sleeve is manufactured to Ferrari's original specification for thread fit and outer profile, so it seats firmly in its mounting location and engages the mating fastener cleanly across the full thread length. Generic inserts can be slightly off in thread tolerance — binding on installation or loosening under vibration — or the wrong outer profile, which lets the insert spin in its seat and destroys the mounting point. For hardware that holds bodywork and trim together, the genuine sleeve protects the panel and bracket it serves.
Install Notes
Fitting should be carried out by a trained technician during panel or trim refitting. Remove the old insert, clean and inspect the mounting location for damage, and seat the new genuine sleeve fully into its original position before threading in the fastener. Do not overtighten against a sleeve that has not seated correctly. For related body hardware, see the Genuine Ferrari Screw Collar 262109 or browse our Body & Exterior Parts collection.
Specifications
| Brand | Genuine Ferrari |
| OE Part Number | 13526070 |
| Type | Threaded Insert Mounting Sleeve (body hardware) |
| Application | Body and trim mounting points requiring a threaded insert |
| Thread Specification | Ferrari OE specification — refer to official parts catalog for thread data |
| Material / Finish | Ferrari OE specification — refer to official parts catalog for material data |
| Dimensions | Ferrari OE specification — refer to official parts catalog for dimensional data |
| Fitment | Multiple Ferrari models — confirm fitment with your VIN |
| Condition | Brand new, genuine OEM |
| Packaging | Genuine Ferrari factory packaging |
| Installation | Direct replacement, no modification required |
Genuine vs Aftermarket Comparison
| Feature | Genuine 13526070 | Generic / Aftermarket Insert |
|---|---|---|
| Seat fit | Matches the OE mounting location exactly | Wrong outer profile can spin or sit loose in the seat |
| Thread engagement | Full, even thread engagement with the mating fastener | Off-tolerance threads can bind or strip |
| Clamping hold | Holds torque through vibration and heat cycles | May loosen, letting trim and panels work free |
| Mounting point protection | Even load distribution protects the surrounding material | Spinning inserts damage the seat, widening the repair |
| Refit reliability | Stands up to repeated removal and refitting | Can deform or lose grip after one or two cycles |
| Fitment confidence | Direct fit, no modification | May require adhesive or rework as a workaround |
Verification note: Compared against genuine Ferrari parts catalogue data for 13526070, verified 2026-10-13 via the official OE parts listing. Generic insert behaviour described from common aftermarket fitment issues reported by workshops.
Why Choose European Auto Spares
Restores Secure Mounting Points
The genuine 13526070 sleeve seats firmly in its location, giving screws and bolts a solid, factory-correct thread to anchor into — no spinning, no looseness.
Correct Thread Engagement
Matching the OE thread specification means the mating fastener draws down evenly and holds its torque through vibration and heat cycles.
Prevents Spinning Inserts
The correct outer profile grips the mounting location, avoiding the seat damage and widening repair that a wrong-profile insert causes.
Refit-Friendly
Direct replacement for the original insert. Technicians can fit it during normal panel or trim work, and it stands up to repeated servicing.
Global Express Delivery
We supply genuine OEM Ferrari mounting hardware worldwide, carefully packed so precision threaded parts arrive ready to fit.
Complete the Job
If you are refitting bodywork or trim, pair this with the Genuine Ferrari Screw Collar 262109 for panel screws or the Genuine Ferrari Body Nut 255271 for related fixing points, and browse the full Body & Exterior Parts collection. Order from European Auto Spares for genuine OEM Ferrari body components with worldwide delivery.
Need Help Finding the Right Ferrari Mounting Hardware?
Insert sleeves and mounting hardware vary across Ferrari model years and production splits, and similar hardware is easy to confuse. Send us your complete VIN before ordering and our parts team will confirm the exact 13526070 application for your car, so you get the right insert the first time. The part arrives in genuine Ferrari packaging, ready for professional installation.
Keep Your Ferrari's Mountings Rock Solid
A worn or incorrect insert sleeve is a common cause of fasteners that will not stay tight and trim that works loose. Replace it with the Genuine Ferrari Threaded Insert Mounting Sleeve 13526070 and restore the secure, factory-correct mounting your Ferrari was built with. Order today from European Auto Spares and keep every fixing holding firm.
Fitment Details
xFerrari Threaded Insert Sleeve 13526070 Fitment
| Ferrari Model | Application |
|---|---|
| Multiple Ferrari models | Body and trim mounting points requiring a threaded insert — confirm exact location with your VIN |
Technician's Advisory: Mounting hardware applications vary across Ferrari model years and production splits. Always confirm exact fitment with your VIN before ordering — our team verifies the thread and seat compatibility for your car before dispatch. During fitting, seat the new genuine sleeve fully into its original position before threading in the fastener, and do not overtighten against a sleeve that has not seated correctly.
FAQs
xFrequently Asked Questions
The 13526070 is a genuine Ferrari threaded insert mounting sleeve. It provides a permanent, load-bearing thread inside a body or trim mounting location that cannot hold one on its own. The sleeve seats into its location and the fixing screw threads into it, spreading clamping load across the full engagement length. It matches the OE thread and outer profile exactly.
Look for a screw that turns without tightening, a fastener that loosens again shortly after being secured, or a mounting point that feels soft when the screw is drawn down. These symptoms often follow repeated removal and refitting, or a repair where the original insert was damaged. Continuing to tighten against a spinning insert damages the surrounding material.
The 13526070 insert sleeve is used across multiple Ferrari models at various body and trim mounting points, but hardware can vary by model year and production split. Send us your complete VIN before ordering and our parts team will confirm the exact application for your car, so the sleeve matches the thread and seat at your mounting location.
A generic insert might seem to fit, but it rarely matches the OE thread tolerance and outer profile. In our experience, aftermarket inserts can bind on installation or loosen under vibration, and the wrong outer profile lets the insert spin in its seat, damaging the mounting point. The genuine Ferrari 13526070 seats firmly and engages the mating fastener cleanly.
This is a genuine Ferrari part supplied in packaging. It is covered against manufacturing defects under the genuine parts warranty, and your statutory consumer rights apply in the UAE. If the part arrives damaged due to our error, we will replace or refund it. We verify your VIN before dispatch to reduce the chance of ordering the wrong insert.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
