Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Land Rover Body Panel Retaining Clip Fastener DYC101420
Dhs. 10.00
Vendor: European Autospares Trading LLC
Genuine Land Rover Body Panel Retaining Clip Fastener DYC101420
Dhs. 10.00
Description
xProduct Overview
The Genuine Land Rover Body Panel Retaining Clip Fastener DYC101420 is the original equipment clip that holds body panels, wheel arch trim and mouldings firmly in place on Land Rover models. These small clips take constant vibration, heat and road spray, and they commonly break or lose grip when a panel is removed for service. A loose trim panel rattles, flaps at speed and lets water and dirt behind the bodywork, so replacing failed clips with the correct OE fastener keeps the bodywork tight and quiet.
Part Numbers & Reference Codes
OE part number: DYC101420. Cross references for the same clip pattern include 7703077368, 4414720, 21657 and 93176656. Always compare the clip with the original before fitting, since Land Rover used several similar looking fasteners.
Vehicle Compatibility & Fitment
This clip fits the Land Rover Freelander, Discovery 3 (LR3), Discovery 4 (LR4) and Range Rover Sport models listed in the Fitment Details tab, where it retains wheel arch trim and body mouldings. It is sold individually, so order the quantity your panel requires.
Key Features & Benefits
- Genuine OE clip: the exact fastener specified by Land Rover for these panels.
- Secure hold: correct size and grip keeps trim and wheel arch mouldings firmly seated.
- Rattle free bodywork: replacing broken clips stops trim movement, noise and water ingress.
- Direct push fit: installs into the original mounting holes with no modification.
Technical Specifications
| OE Part Number | DYC101420 |
| Brand | Land Rover (Genuine) |
| Product Type | Body panel retaining clip fastener |
| Application | Wheel arch trim and body mouldings |
| Fitting Position | Body panels, wheel arch trim |
| Condition | New |
| Category | Body & Exterior Parts |
Installation Position & Fitment Notes
This clip pushes into the mounting holes for wheel arch trim and body mouldings on the models listed, seating the trim against the body panel. Check the hole size and the trim it retains before fitting, and replace all broken clips along the same panel so the trim sits evenly.
Product Brand, Type & Condition
Brand: Land Rover, genuine original equipment. Type: body panel retaining clip fastener for wheel arch trim and mouldings. Condition: brand new, sold individually.
What’s Included in the Box
This listing includes one (1) Genuine Land Rover Body Panel Retaining Clip Fastener, OE part number DYC101420. Order the quantity required for your panel.
Installation Requirements
Fitting needs no special tools: remove the trim carefully, pull out any broken clip remains, and push the new clip fully home until it seats. Check the trim sits flush along its full length, and replace neighbouring worn clips at the same time for an even fit.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Ready to order? Order the Genuine Land Rover Body Panel Retaining Clip Fastener DYC101420 from European Autospares Trading LLC, stocked in Dubai with fast delivery across the UAE and worldwide shipping. Not sure it fits? Contact us with your VIN and our parts team will confirm before you buy. Browse Land Rover spare parts or our Body and Exterior Parts range.
Fitment Details
xLAND ROVER FITMENT GUIDE
| Model | Model Year Range | Application |
|---|---|---|
| Land Rover Freelander | 2002 – 2005 | Wheel arch trim and body moulding retainer clip |
| Land Rover Discovery 3 (LR3) | 2005 – 2009 | Wheel arch trim and body moulding retainer clip |
| Land Rover Discovery 4 (LR4) | 2010 – 2013 | Wheel arch trim and body moulding retainer clip |
| Land Rover Discovery 4 (LR4) | 2015 – 2016 | Wheel arch trim and body moulding retainer clip |
| Land Rover Range Rover Sport (L320) | 2006 – 2013 | Wheel arch trim and body moulding retainer clip |
Technician's Advisory: Remove trim panels with a proper trim tool and pull straight out along the clip axis, since prying at an angle snaps the clip and can crack the trim. Clear broken clip remains from the mounting holes before fitting new clips, and replace every worn clip along the panel so the trim seats evenly.
Important: This genuine Land Rover part is listed by OE part number DYC101420. Exact compatibility depends on the model, variant and production date. Send your complete VIN to the European Autospares parts team and we will verify this is the correct clip for your vehicle.
FAQs
xFrequently Asked Questions
It fits the Freelander, Discovery 3 (LR3), Discovery 4 (LR4) and Range Rover Sport models listed in the fitment table, where it retains wheel arch trim and body mouldings. Compare the clip with your original before ordering, since Land Rover used several similar fasteners.
It retains wheel arch trim and body mouldings, seating them firmly against the body panel so the trim follows the body lines correctly. When these clips break, trim rattles, flaps at speed and lets water and dirt behind the panel, so failed clips should be replaced promptly.
That depends on the panel: wheel arch trims and mouldings use several clips spaced along their length. Count every clip position on your panel, including any already broken or missing, and order that quantity, since this listing is for one single clip.
Usually not. Trim clips are designed for a single firm seating and commonly break or lose grip when a panel is pulled off. Fit new clips whenever a panel is removed, so the trim refits tightly and does not rattle.
Remove the trim carefully, pull out any broken clip remains from the mounting holes, and push the new clip fully home until it seats. Check the trim sits flush along its full length before finishing, and replace neighbouring worn clips at the same time.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
