Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Maserati Corrugated Pipe Mounting Bracket N90681301
Dhs. 10.00
Vendor: European Autospares Trading LLC
Genuine Maserati Corrugated Pipe Mounting Bracket N90681301
Dhs. 10.00
Description
xProduct Overview
The Corrugated Pipe Mounting Bracket (OE N90681301) is a genuine Volkswagen Group standard part: a small mounting bracket (clip) that secures corrugated protective conduit in a wiring harness run. Corrugated pipe protects wiring from chafing, heat and moisture, and this bracket holds the conduit firmly to the body or assembly so the harness cannot rub, sag or vibrate loose. It is a low-cost part with an important job: a missing or broken conduit bracket is a common cause of harness wear and intermittent electrical faults.
Part Numbers & Reference Codes
OE part number: N90681301 (written N 906 813 01 in the Volkswagen Group catalogue). It appears in wiring set diagrams, including electromechanical power steering wiring sets, so always order and verify by this part number and match it against the bracket position in your harness diagram.
Vehicle Compatibility & Fitment
As a standard part, this bracket is used across Volkswagen Group wiring harnesses rather than on one single model, and the exact harness and mounting position vary by vehicle and production date. Confirm the application with your VIN and harness diagram before ordering. See the Fitment Detail tab for guidance.
Key Features & Benefits
- Genuine VW Group standard part: made to the factory specification for the conduit size and mounting hole it serves.
- Protects the harness: keeps corrugated conduit routed correctly so wiring cannot chafe or hang loose.
- Prevents electrical faults: a secure conduit run avoids the rubbed-through insulation that causes shorts and intermittent faults.
- Direct replacement: clips into the original mounting point with no modification.
Technical Specifications
| OE Part Number | N90681301 |
| Brand | Volkswagen Group (Audi / Volkswagen / Porsche / Bentley) |
| Product Type | Mounting Bracket for Corrugated Pipe (wiring conduit clip) |
| System | Electrical, wiring harness routing |
| Condition | New, Genuine OEM |
Installation Position & Fitment Notes
The bracket fits at the conduit mounting point shown in the wiring set diagram for your vehicle, for example on the electromechanical power steering wiring set. Route the corrugated pipe through the bracket without kinking it, make sure the bracket is fully engaged in its mounting hole, and leave the harness free of tension and clear of hot or moving parts.
Product Brand, Type & Condition
Brand: Volkswagen Group. Type: mounting bracket for corrugated pipe, a wiring harness conduit clip. Condition: brand-new genuine OEM part, supplied exactly as the factory produces it.
What’s Included in the Box
This listing includes one (1) Corrugated Pipe Mounting Bracket, OE part number N90681301.
Installation Requirements
Installation is straightforward for a technician familiar with wiring harness work, but the battery should be disconnected before disturbing harness routing, and the finished run should be checked for chafing points, tension and clearance from hot or moving parts.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Need to secure a loose wiring conduit properly? Order the Corrugated Pipe Mounting Bracket N90681301 from European Autospares Trading LLC, stocked in Dubai with fast delivery across the UAE. Not sure it is the right bracket? Contact us with your VIN and our parts team will confirm before you buy. Browse more genuine Volkswagen spare parts, genuine Audi spare parts and electrical system parts.
Fitment Details
xFitment Details
| Model | Application |
|---|---|
| Volkswagen Group models originally fitted with this wiring harness bracket | Application-dependent, confirm fitment using your complete VIN before ordering |
Technician’s Advisory: Match the bracket to the original by conduit size and mounting hole, route the corrugated pipe through it without kinking, and check the finished harness run for tension, chafing points and clearance from hot or moving parts. A bracket forced into the wrong hole will not hold the conduit securely.
Important: This genuine Volkswagen Group part is listed by OE part number N90681301. Exact compatibility depends on the model, variant, production date and equipment level. Send your complete VIN to the European Autospares parts team and we will verify this is the correct part for your vehicle.
FAQs
xFrequently Asked Questions
It is a mounting bracket that secures corrugated protective pipe, the ribbed conduit that shields wiring harness runs from chafing, heat and moisture. The bracket clips the conduit to the body or assembly so the harness stays routed exactly where the factory intended, instead of sagging or rubbing.
Yes. The N90681301 is a genuine Volkswagen Group standard part, listed in the Volkswagen Group parts catalogue under wiring sets, including electromechanical power steering wiring. It is made to the factory specification for the conduit and mounting point it serves.
As a standard part it is used across Volkswagen Group wiring harnesses rather than on one single model, so the exact harness and mounting position vary by vehicle and production date. Check the bracket position in your harness diagram, or send us your VIN and we will confirm it.
The corrugated pipe can sag, vibrate or rub against brackets, edges or hot parts, and over time the conduit and the wiring inside wear through. That is a common cause of intermittent electrical faults, so a missing bracket is worth replacing even though the part itself is small.
No, it is a simple clip-in part, but the harness run should be checked after fitting for kinks, tension and clearance from hot or moving parts. Disconnect the battery before disturbing harness routing, and make sure the bracket is fully engaged in its mounting hole.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
