Genuine Maserati Steering Axial Joint Tie Rod 673014359

Product Overview

The Genuine Maserati Steering Axial Joint Tie Rod 673014359 is the original axial joint, the inner tie rod, for the front steering of your Maserati. The axial joint screws into the end of the steering rack and connects, through the outer tie rod end, to the steering knuckle. Its ball joint allows the rack to steer the front wheels while accommodating suspension movement, and the threaded connection is where front wheel toe is set during alignment. When this joint wears, free play develops inside the steering, showing up as vagueness on centre, knocking over rough surfaces and uneven front tyre wear. We could not find a public factory catalogue listing for the exact number 673014359 in the sources available to us, so this page is written to the part identity in the title, the steering axial joint, and fitment for this listing is confirmed by VIN only. Please send your VIN before ordering so our parts team can verify 673014359 against your exact car.

Part Numbers & Reference Codes

OE part number: 673014359. Always order and verify by this Maserati part number together with your VIN. Axial joints are steering-rack specific: thread size, joint length and the mating tie rod end all vary between Maserati models and production periods, and similar-looking joints from other models must not be substituted on appearance alone. Note that numbers close to this one in the 673014 range appear in published Maserati catalogue diagrams for other assemblies, which is a further reason this part must be matched by its full number and your VIN, and checked against the part removed from the car, before it is dispatched or fitted.

Vehicle Compatibility & Fitment

This axial joint is a front axle steering part, fitted at the steering rack on the left or right side. Because we could not verify a model list for 673014359 from a factory catalogue source, we do not publish a model table for it: the Fitment Details tab carries VIN-verification wording instead of invented applications. Maserati steering parts differ by model, steering rack supplier, drive layout and production split, so a part that looks identical can carry a different thread or length. Send your complete VIN to our parts team and we will verify this joint against the factory data for your car before you buy. If your workshop has already removed the old joint, a photograph and the thread and length measurements are a useful second check alongside the VIN.

Key Features & Benefits

• Genuine Maserati axial joint: the original inner tie rod, made to the factory specification for the steering rack it serves.
• Restores steering precision: a new joint removes the internal play that causes vague steering, knocking and uneven front tyre wear.
• Front axle, left or right: axial joints of this type fit either side of the front steering rack; confirm side and quantity with your workshop.
• Alignment-ready: the threaded joint is the toe adjustment point, so a sound joint lets the alignment shop set front toe accurately and hold it.
• VIN-verified supply: because this number has no public catalogue listing we could check, every order is verified against your VIN before dispatch.

Technical Specifications

Installation Position & Fitment Notes

This axial joint installs at the end of the front steering rack, inside the steering rack gaiter, and connects to the outer tie rod end. The gaiter must be released to access the joint, and the joint is unscrewed from the rack bar using the correct tooling so the rack itself is not damaged. Before removal, the existing toe setting should be recorded as a starting point, but recording the old setting is not a substitute for alignment. The rack gaiter and its clips should be inspected and renewed if split, because a torn gaiter lets water and grit into both the rack and the new joint. After fitting, a full front wheel alignment is essential: toe is adjusted at this joint, and driving on a guessed setting will wear the front tyres quickly.

Product Brand, Type & Condition

Brand: Maserati. Type: steering axial joint tie rod, the inner tie rod of the front steering. Condition: brand-new genuine OEM part, supplied exactly as the factory produces it. The outer tie rod end, rack gaiter and steering rack are separate parts and are not part of this listing.

What’s Included in the Box

This listing includes one (1) Genuine Maserati Steering Axial Joint Tie Rod, OE part number 673014359. If both sides show play, workshops normally renew the pair and then align the car; order two if your inspection shows both joints are worn. The outer tie rod end is supplied separately under its own part number.

Installation Requirements

Professional installation by a qualified technician is recommended, as this is a safety-critical steering component. The joint must be tightened to the Maserati specification, the gaiter refitted and sealed correctly, and a full wheel alignment carried out after installation before the car is returned to the road.

Warranty & Returns

This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.

Confirm Fitment & Order

Ready to restore your Maserati steering feel? Order the Genuine Maserati Steering Axial Joint Tie Rod 673014359 from European Autospares Trading LLC, with fast delivery across the UAE. Fitment for this part is VIN-verified, so Contact us with your VIN first and our parts team will confirm before you buy. Browse all genuine Maserati spare parts and our suspension and steering parts.