Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Mercedes-Benz Engine Bleed Line Pipe Assembly A2600180300
Dhs. 108.00
Vendor: European Autospares Trading LLC
Genuine Mercedes-Benz Engine Bleed Line Pipe Assembly A2600180300
Dhs. 108.00
Description
xProduct Overview
The Genuine Mercedes-Benz Engine Bleed Line Pipe Assembly (OE A2600180300) is the original bleed line for the engine it was specified for. Bleed and vent lines allow trapped air to escape from the engine’s fluid circuits so the system fills fully and circulates correctly; a split, perished or blocked line can cause leaks, air locks and overheating or warning faults. This genuine replacement assembly restores the original routing, connections and sealing exactly as Mercedes-Benz designed it.
Part Numbers & Reference Codes
OE part number: A2600180300 (also written A 260 018 03 00). Always order and verify by this Mercedes-Benz part number to ensure you receive the correct original component for your vehicle.
Vehicle Compatibility & Fitment
This bleed line assembly is a genuine Mercedes-Benz engine component. Its exact application depends on the model, engine and production date, and more than one line design may be used across the range, so confirm fitment with your VIN before ordering and our parts team will verify it against the factory catalogue. See the Fitment Detail tab for guidance.
Key Features & Benefits
- Genuine OE assembly: the original Mercedes-Benz bleed line, manufactured to the factory specification.
- Complete pipe assembly: supplied as the formed line with its original connection points, ready to fit in place of the old unit.
- Correct routing and sealing: shaped to the original path so it connects cleanly and seals without strain.
- Protects the engine: a sound bleed line lets the circuit vent properly, helping prevent air locks and the leaks a perished line causes.
Technical Specifications
| OE Part Number | A2600180300 |
| Brand | Mercedes-Benz |
| Product Type | Engine Bleed Line Pipe Assembly |
| System | Engine bleed / vent circuit |
| Condition | New, Genuine OEM |
Installation Position & Fitment Notes
The bleed line is fitted in the engine compartment as part of the engine’s bleed and vent routing; its exact position depends on the model and engine fitted. After fitting, the circuit it serves must be refilled and bled following the factory procedure, then checked for leaks. Confirm fitment by VIN before ordering.
Product Brand, Type & Condition
Brand: Mercedes-Benz. Type: engine bleed line pipe assembly. Condition: brand-new genuine OEM part, supplied exactly as the factory produces it.
What’s Included in the Box
This listing includes one (1) Genuine Mercedes-Benz Engine Bleed Line Pipe Assembly, OE part number A2600180300.
Installation Requirements
Professional installation by a qualified technician is recommended. Work on a cold engine, renew any single-use seals or clips the workshop manual calls for, refill and bleed the circuit to the Mercedes-Benz procedure, and carry out a full leak check at operating temperature before returning the vehicle to use.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Ready to renew your Mercedes-Benz bleed line? Order the Genuine Mercedes-Benz Engine Bleed Line Pipe Assembly A2600180300 from European Autospares Trading LLC, stocked in Dubai with fast delivery across the UAE. Not sure it fits? Contact us with your VIN and our parts team will confirm before you buy. Browse more genuine Mercedes-Benz spare parts.
Fitment Details
xMERCEDES-BENZ FITMENT GUIDE
| Model | Engine / Application | Year Range |
|---|---|---|
| Mercedes-Benz models originally fitted with this line | Engine bleed / vent line assembly — application varies by model and engine | Confirm by VIN |
Technician’s Advisory: Work on a cold engine and catch any drained fluid. Route the new line exactly as the original, renew single-use seals and clips, then refill and bleed the circuit following the Mercedes-Benz procedure and check every joint for leaks at operating temperature.
Important: This genuine Mercedes-Benz part is listed by OE part number A2600180300. Exact compatibility depends on the model, engine, production date and equipment level. Send your complete VIN to the European Autospares parts team and we will verify this is the correct part for your vehicle.
FAQs
xFrequently Asked Questions
Yes. The A2600180300 is a genuine Mercedes-Benz OE bleed line pipe assembly — the original component, not an aftermarket copy. Genuine lines are formed to the exact factory routing with the correct connection points and materials, so the assembly fits first time and seals reliably in the engine’s heat and pressure environment.
It vents trapped air out of the engine’s fluid circuit as the system is filled and as it runs, so the circuit can fill completely and circulate without air pockets. A line that is split, blocked or perished can cause leaks, air locks and level warnings, which is why a damaged bleed line should be renewed rather than repaired.
Bleed line assemblies vary by model, engine and production date, even where they look similar. The reliable check is your VIN: send the complete VIN to our parts team and we will verify the A2600180300 against the Mercedes-Benz factory catalogue for your exact vehicle before you buy, so you order the right assembly first time.
Look for visible cracking, brittleness or chafing along the pipe, dampness or dried residue at its connections, unexplained fluid loss, and a system that will not bleed or fill correctly after other work. Because a failed line can lead to overheating damage, treat leaks as urgent and have the circuit pressure-checked after fitting.
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it. We recommend VIN verification before ordering — contact us first if you are unsure about fitment.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
