Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Porsche Suspension Rubber Bush Mount 97034124101A
Dhs. 98.00
Vendor: European Autospares Trading LLC
Genuine Porsche Suspension Rubber Bush Mount 97034124101A
Dhs. 98.00
Description
xProduct Overview
The Genuine Porsche Front Lower Wishbone Rear Inner Bush 97034124101A is the original equipment rubber mount for the front lower control arm of the Porsche Panamera 970. It sits at the rear inner end of the lower wishbone, where the arm meets the subframe, and absorbs road shocks and vibration while holding the wheel geometry steady. When this bush wears, the arm moves too much, causing knocking over bumps, vague steering and uneven tyre wear.
Part Numbers & Reference Codes
OE part number: 97034124101A (base number 970 341 241 01, also written 97034124101). Related control arm bush numbers in the same front axle family include 97034124301 and 97034124502, which are different mounts and are not interchangeable with this bush. This bush fits the left and right sides equally.
Vehicle Compatibility & Fitment
This bush fits the Porsche Panamera 970 from 2010 to 2016, at the rear inner position of the front lower wishbone, as listed in the Fitment Details tab. It is the same part on the left and right sides. Always confirm the bush position against your VIN before ordering, since the Panamera front axle uses several different bushes.
Key Features & Benefits
- Genuine OE bush: the exact rubber mount specified by Porsche for the Panamera 970 front lower wishbone.
- Rubber and metal construction: a high-strength rubber body with a precision metal inner sleeve for a firm, lasting fit.
- Quieter, steadier ride: absorbs shocks and vibration and stops the knocking caused by a worn bush.
- Same part both sides: fits the left and right front lower wishbones, simplifying ordering and stock.
Technical Specifications
| OE Part Number | 97034124101A |
| Brand | Porsche (Genuine) |
| Product Type | Front lower wishbone rear inner rubber bush |
| Application | Panamera 970, 2010-2016 |
| Position | Front axle, lower control arm, rear inner |
| Side | Left and right |
| Material | Rubber with metal inner sleeve |
| Condition | New |
| Category | Suspension & Steering |
Installation Position & Fitment Notes
The bush presses into the rear inner end of the front lower wishbone, at the subframe mounting point. It is a press-fit part, so the old bush must be pressed out and the new one pressed in squarely to avoid damage. Check the wishbone, ball joint and the other bushes while the arm is off the car.
Product Brand, Type & Condition
Brand: Porsche, genuine original equipment. Type: front lower wishbone rear inner rubber bush for the Panamera 970. Condition: brand new, sold individually, fitting the left and right sides.
What's Included in the Box
This listing includes one (1) Genuine Porsche Front Lower Wishbone Rear Inner Bush, OE part number 97034124101A. Confirm how many bushes your repair needs with your VIN, since the same part fits both sides of the car.
Installation Requirements
Fitting is a workshop job: remove the front lower wishbone, press out the worn bush, press in the new bush, refit the arm with new fasteners where specified, and carry out a wheel alignment afterwards. Road test to confirm the knocking has gone and the steering feels tight.
Warranty & Returns
This brand-new genuine part is covered against manufacturing defects, and your statutory consumer rights apply in the UAE. If the part arrives damaged or is incorrect due to our error, we will replace or refund it.
Confirm Fitment & Order
Ready to order? Order the Genuine Porsche Front Lower Wishbone Rear Inner Bush 97034124101A from European Autospares Trading LLC, stocked in Dubai with fast delivery across the UAE and worldwide shipping. Not sure it fits? Contact us with your VIN and our parts team will confirm before you buy. Browse Porsche spare parts, our Suspension & Steering Parts catalogue.
Fitment Details
xPORSCHE FITMENT GUIDE
| Model | Model Year Range | Engine |
|---|---|---|
| Porsche Panamera (970) | 2010 – 2016 | Front lower wishbone, rear inner bush |
Technician's Advisory: Press the new bush in squarely and never hammer it into place, since a distorted bush wears quickly and changes the wheel geometry. Replace bushes in pairs across the axle where wear is even, and always carry out a wheel alignment after wishbone work.
Important: This genuine part is listed by OE part number 97034124101A. Exact compatibility depends on the model, engine code and production date. Send your complete VIN to the European Autospares parts team and we will verify this is the correct front lower wishbone bush for your vehicle.
FAQs
xFrequently Asked Questions
It fits at the rear inner end of the front lower wishbone on the Porsche Panamera 970, where the arm mounts to the subframe. It is the same part on the left and right sides. Confirm the position from your VIN before ordering, since the front axle uses several different bushes that look similar.
Typical signs are knocking or clunking over bumps, vague or wandering steering, vibration through the car, and uneven tyre wear. A worn bush lets the wishbone move too much, which changes wheel alignment under load. A workshop inspection can confirm the bush before you replace other parts.
Yes, the same bush fits the left and right front lower wishbones on the Panamera 970. That makes ordering simple, but check how many bushes your repair needs, since worn bushes are often replaced in pairs across the axle to keep handling even on both sides.
Yes, those are different mounts in the same front axle family and they are not interchangeable with this bush. Each number fits a specific mounting position on the Panamera 970 front suspension. Match the OE number exactly, or confirm the position with your VIN, before ordering.
Yes, always have the wheel alignment checked after wishbone bush replacement. Removing and refitting the wishbone changes the suspension geometry, and driving with incorrect alignment wears tyres quickly and dulls handling. A workshop alignment restores the factory settings after the repair.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
