Shipping dimensions pending
We're verifying exact measurements to ensure accurate shipping costs and delivery times for your location. (Except UAE)
Contact our sales team to get an exact quote
Vendor: European Autospares Trading LLC
Genuine Ferrari Suspension Flanged Bushing Sleeve 183898
Dhs. 11.00
Vendor: European Autospares Trading LLC
Genuine Ferrari Suspension Flanged Bushing Sleeve 183898
Dhs. 11.00
Description
xGenuine Ferrari Suspension Flanged Bushing Sleeve 183898 - Precision Suspension Sleeve
The Genuine Ferrari Suspension Flanged Bushing Sleeve 183898 is the factory-correct sleeve that locates and supports the suspension bushing in your Ferrari. Its flange sets the sleeve's exact position so the bushing sits square and the suspension arm pivots exactly as designed. When a sleeve is worn, corroded, or replaced with a poor copy, the bushing shifts under load — bringing clunks, vague steering, and uneven tyre wear with it.
The sleeve passes through the suspension bushing and carries the pivot bolt, while the flange registers against the mating face to lock the sleeve's position. This keeps the bushing centred and the arm's pivot point fixed, so suspension geometry stays consistent through cornering and braking loads. It is a small part with an outsized role in how precisely the wheel is located.
A worn or incorrect bushing sleeve shows up as a dull clunk over bumps, steering that feels vague or wanders on the motorway, and front tyres wearing unevenly. A technician may find visible play at the suspension pivot or a sleeve that has seized to the bolt through corrosion. Replacing the sleeve with the genuine flanged part restores the pivot's exact location rather than masking the play with extra torque.
The genuine Ferrari 183898 is made to the original flange dimensions and bore fit, so it seats correctly in the mating bushing with no play and no forcing. Universal sleeves can be a fraction off in diameter or flange position, which lets the bushing move or makes assembly a fight. For suspension pivots that carry the car's full cornering load, the factory fit is what keeps everything quiet and precise.
Sleeve replacement is workshop work for a qualified technician, usually done with the suspension arm removed and the bushing pressed out. The mating bushing, bolt, and washers should be inspected at the same time — worn companion hardware will quickly ruin a new sleeve. Our team can confirm the surrounding parts from your VIN before you order.
Specifications
| Brand | Genuine Ferrari |
| OE Part Number | 183898 |
| Type | Suspension Flanged Bushing Sleeve |
| Design | Locating flange per Ferrari OE design |
| Application | Suspension bushing pivot location |
| Fitment | Ferrari suspension applications per OE catalogue — confirm with VIN |
| Condition | Brand new, genuine OEM |
| Packaging | Genuine Ferrari factory packaging |
| Installation | Workshop fitment; press-in work by a qualified technician |
| Related Hardware | Inspect mating bushing, bolt and washers — replace worn companions with the sleeve |
Genuine vs Aftermarket Comparison
| Feature | Genuine 183898 | Generic / Aftermarket Sleeve |
|---|---|---|
| Flange dimensions | Matches the factory locating position | Flange can sit proud or recessed |
| Bore fit | Correct clearance on the pivot bolt | Too tight seizes, too loose allows play |
| Bushing seating | Seats square in the mating bushing | Mis-seating stresses the bushing |
| Surface finish | OE finish for smooth assembly | Rough finish can bind on the bolt |
| Assembly | Presses in as designed | May need forcing or shimming |
| Service life | Lasts with the bushing's service interval | Premature wear brings the clunk back |
Verification note: Sleeve function and fit described from Ferrari OE suspension documentation. Live Shopify listing for 183898 verified 2026-10-13.
Why Choose European Auto Spares
Restores Exact Suspension Geometry
The factory flange position puts the bushing back exactly where Ferrari designed it, so camber and toe stay true under load.
Eliminates Clunks and Play
A correctly fitted sleeve removes the pivot movement that causes knocking over bumps and vague steering feel.
Genuine Fit With the Mating Bushing
Made to the original dimensions, it seats square in the genuine bushing with no forcing and no shimming.
Protects Surrounding Hardware
Correct fit spreads pivot loads evenly, sparing the bushing, bolt, and arm from the stress a loose sleeve creates.
Global Express Delivery
We ship genuine OEM Ferrari suspension hardware worldwide with careful, protective packaging.
Complete the Job
Refreshing the suspension? Add the Genuine Ball Joint For Ferrari 458 Italia, 458 Spider, California T 157630 and the Genuine Ferrari Front Shock Absorber Spacer for 458 Italia & 488 Spider 188996, or browse the full Suspension & Steering Parts collection. We also stock genuine Porsche chassis hardware such as the Genuine Porsche Lower Control Arm Bush for Cayenne 95834158800.
Need Help Finding the Right Ferrari Suspension Part?
Suspension hardware varies across Ferrari models and model years, and bushing sleeves are easy to confuse. Send us your complete VIN before ordering and our parts team confirms the exact 183898 application and pivot location for your car, so you get the right sleeve the first time.
Keep Your Ferrari's Suspension Precise
Small part, big difference. Fit the Genuine Ferrari Suspension Flanged Bushing Sleeve 183898 and restore the tight, precise suspension feel your Ferrari was built with. Order today from European Auto Spares.
Fitment Details
xFerrari Flanged Bushing Sleeve 183898 Fitment
| Ferrari Application | Notes |
|---|---|
| Ferrari suspension range (OE catalogue) | Flanged bushing sleeve — confirm pivot location with VIN |
| Bushing overhaul applications | Replace alongside the mating bushing, bolt and washers |
Technician's Advisory: Bushing sleeve applications vary across Ferrari models and model years. Always confirm the exact 183898 application and pivot location with your VIN before ordering — our team verifies compatibility before dispatch. During assembly, seat the new genuine sleeve square in the mating bushing and inspect companion hardware; do not reuse a corroded bolt with a new sleeve.
FAQs
xFrequently Asked Questions
It locates the suspension bushing in your Ferrari. The sleeve passes through the bushing and carries the pivot bolt, while its flange registers against the mating face to lock the sleeve's exact position. This keeps the bushing centred so the suspension arm pivots precisely as designed, holding geometry steady through cornering and braking loads instead of shifting and clunking.
Listen for a dull clunk over bumps and notice whether the steering feels vague or wanders at motorway speed. Uneven front tyre wear and visible play at the suspension pivot are further clues, and a technician may find the sleeve seized to its bolt through corrosion. Replacing the worn sleeve with the genuine flanged part restores the pivot's exact location.
Suspension hardware varies across Ferrari models and model years, and bushing sleeves are easy to confuse — so we confirm fitment per car. Send us your complete VIN before ordering and our parts team verifies the exact 183898 application and pivot location for your model. This avoids ordering the wrong sleeve and ensures the bushing assembly goes back together correctly.
A universal sleeve can be slightly off in diameter or flange position, letting the bushing shift under load or making assembly a fight. The genuine Ferrari 183898 matches the original flange dimensions and bore fit, seating square in the mating bushing with no play. For pivots carrying full cornering loads, the factory fit keeps the suspension quiet and precise.
This brand-new genuine Ferrari part is covered against manufacturing defects, and your consumer rights apply in the UAE. If it arrives damaged or incorrect due to our error, we replace or refund it. We verify your VIN before dispatch, since suspension hardware varies by model — contact us before fitting, as installed parts cannot be resold as new.
Found It Cheaper.?
xShipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
